NanoBTSInternals » History » Revision 4
« Previous |
Revision 4/12
(diff)
| Next »
tnt, 02/19/2016 10:48 PM
'''WARNING: Opening or modifying your nanoBTS will render your warranty void and might affect regulatory approval!'''
nanoBTS 1800 PCB photographssee attachments at the end of this page.
=== Debug Port ===
There is a serial port for debugging. This port can be accessed via one of the two TIB RJ45 jacks, but only after
a small hardware modification has been made. Please reference the following picture for details.
After soldering those two connections, the pin-out of ''TIB out'' is as follows:
- Pin 7: PPC UART Tx (3.3V)
- Pin 8: PPC UART Rx (3.3V)
- Pin 10: Ground
You can use any level shifter to get the signal up to true RS323 values, or directly connect something like a FT232.
The port runs at 115200 bps, 8N1
There seems to be some kind of serial console on the device, we haven't yet figured out more details.
nanoBTS 900FIXME
== nanoBTS 139 (1800 1st gen I guess)
see attachments for hi-res.
Image(nanobts_139_top_small.jpg)
Image(nanobts_139_bot_small.jpg)
Image(nanobts_139_digital_small.jpg)
Updated by tnt about 8 years ago · 4 revisions