Osmo-gbproxy VTY » History » Revision 1
Revision 1/5
| Next »
laforge, 02/19/2016 10:48 PM
add vty reference for gbproxy
This page is a reference fo all VTY commands that you can use interactively on the osmo-gbproxy VTY telnet interface on TCP port 4246
In addition, the same commands are used for the configuration file.
configuration reference=== gbproxy level ===
==== nsip sgsn remote ip A.B.C.D ====
Set the remote IP address for the connection to the SGSN.
==== nsip sgsn remote port <0-65534> ====
Set the remote UDP port for the connection to the SGSN.
==== nsip sgsn nsei <0-65534> ====
Set the NSEI for the connection to the SGSN.
==== nsip sgsn nsvci <0-65534> ====
Set the NS-VCI for the connection to the SGSN.
=== ns level ===
==== timer (tns-block|tns-block-retries|tns-reset|tns-reset-retries|tns-test|tns-alive|tns-alive-retries) <0-65535> ====
Set the respective NS (GSM TS 08.16) timer to the corresponding value (in seconds): * tns-block -- Timer between NS-BLOCK attempts without any NS-BLOCK-ACK response * tns-block-retries -- How often to retransmit an unacknowledged NS-BLOCK * tns-reset -- Timer between NS-RESET attempts without any NS-RESET-ACK response * tns-reset-retries -- How many times should we retry to send NS-RESET * tns-test -- How many seconds to wait for the response to a TEST procedure * tns-alive -- How many seconds to wait for an answer to the ALIVE procedure * tns-alive-retries -- How often should we retry the ALIVE precedure before declaring the link DEAD
==== nse <0-65535> nsvci <0-65534> ====
Configure a persistent NS-VC with a given NSEI and NSVCI
==== nse <0-65535> remote-ip A.B.C.D ====
Set the remote IP address for a persistent NS-VC
==== nse <0-65535> remote-port <0-65535> ====
Set the remote UDP port for a persistent NS-VC
==== nse <0-65535> remote-role (sgsn|bss) ====
Set whether the remote end of the specified persistent NS-VC is a BSS or SGSN.
==== no nse <0-65535> ====
Remove the persistent configuration for the specified NSE
runtime commands=== show ns [stats] ===
Show a list of all existing NS-VCs
{{{
proxy.osmocom.org> show ns
NSEI 2342, NS-VC 2342, Remote: BSS , DEAD BLOCKED, 192.161.252.121:23000
NSEI 8989, NS-VC 8989, Remote: SGSN, ALIVE UNBLOCKED, 192.181.57.10:23000
}}}
If the stats parameter is given, statistics will be included.
=== show ns (nsei|nsvc) <0-65535> [stats] ===
Show information for one specific NS-VC identified by NSVCI or NSEI, optionally including stats
{{{
proxy.osmocom.org> show ns nsei 2342 stats
NSEI 2342, NS-VC 2342, Remote: BSS , DEAD BLOCKED, 192.161.252.121:23000
NSVC Peer Statistics:
Packets at NS Level ( In): 402 (0/s 0/m 0/h 402/d)
Packets at NS Level (Out): 253 (0/s 0/m 0/h 253/d)
Bytes at NS Level ( In): 3787 (0/s 0/m 0/h 3787/d)
Bytes at NS Level (Out): 269 (0/s 0/m 0/h 269/d)
NS-VC Block count : 1 (0/s 0/m 0/h 1/d)
NS-VC gone dead count : 1 (0/s 0/m 0/h 1/d)
}}}
=== logging filter nsvc (nsei|nsvci) <0-65535> ===
Set a logging filter, i.e. only display log messages related to the specified NSEI / NSVCI
Updated by laforge about 8 years ago · 1 revisions