Project

General

Profile

Actions
Copy link

Support #6193

open

Replace "event rack" PM3 power supply

Added by laforge 7 months ago. Updated 7 months ago.

Status:
New
Priority:
Low
Assignee:
laforge
Target version:
-
Start date:
09/27/2023
Due date:
% Done:

0%

Description

Today I wanted to test the Event_Setup ahead of CC2023 and noticed that the PM3 won't power up :(

Luckily I have a few spare PM3 around so I could replace the broken PSU with one from another unit.

As I've now already seen two PM3 with broken PSU, let's make sure to replace them in all of them according to the procedure I documented in Livingston_Portmaster_3

Hide closed

Checklist

  • order replacement PSUs
  • order aluminium plates (175x102)
  • drill aluminium plates
  • rework PM3 at Rack LRW34a
  • rework PM3 in event rack
  • rework spare PM3
Actions
Copy link
 #1

Updated by laforge 7 months ago

  • Checklist item order replacement PSUs added
  • Checklist item order aluminium plates added
  • Checklist item drill aluminium plates added
  • Checklist item rework PM3 at Rack LRW34a added
  • Checklist item rework PM3 in event rack added
  • Checklist item rework spare PM3 added
Actions
Copy link
 #2

Updated by laforge 7 months ago

  • Checklist item changed from order aluminium plates to order aluminium plates (175x102)
  • Checklist item order aluminium plates (175x102) set to Done
Actions
Copy link

Also available in: Atom PDF

Add picture from clipboard (Maximum size: 48.8 MB)