1
|
root@tic-epc:/etc/osmocom# LD_LIBRARY_PATH=/lib/x86_64-linux-gnu/ /usr/bin/osmo-bsc -c /home/rhizomatica/src/osmo-bsc/doc/examples/osmo-bsc/ericsson/osmo-bsc.dug20-rus01-4trx.cfg
|
2
|
DNM INFO <0004> fsm.c:461 NM_BTS_SM_OP[0x556b664597e0]{DISABLED_NOTINSTALLED}: Allocated
|
3
|
DNM INFO <0004> fsm.c:461 NM_BTS_OP[0x556b66456af0]{DISABLED_NOTINSTALLED}: Allocated
|
4
|
DLGLOBAL DEBUG <0015> rate_ctr.c:88 validating counter group 0x556b652dcd80(bts) with 88 counters
|
5
|
DNM INFO <0004> fsm.c:461 NM_RCARRIER_OP[0x556b6665e370]{DISABLED_NOTINSTALLED}: Allocated
|
6
|
DNM INFO <0004> fsm.c:461 NM_BB_TRANSC_OP[0x556b6665e540]{DISABLED_NOTINSTALLED}: Allocated
|
7
|
DTS DEBUG <0010> fsm.c:461 timeslot[0x556b6665e710]{NOT_INITIALIZED}: Allocated
|
8
|
DNM INFO <0004> fsm.c:461 NM_CHAN_OP[0x556b6665e840]{DISABLED_NOTINSTALLED}: Allocated
|
9
|
DTS DEBUG <0010> fsm.c:461 timeslot[0x556b6665ec90]{NOT_INITIALIZED}: Allocated
|
10
|
DNM INFO <0004> fsm.c:461 NM_CHAN_OP[0x556b6665ee40]{DISABLED_NOTINSTALLED}: Allocated
|
11
|
DTS DEBUG <0010> fsm.c:461 timeslot[0x556b6665f490]{NOT_INITIALIZED}: Allocated
|
12
|
DNM INFO <0004> fsm.c:461 NM_CHAN_OP[0x556b6665f640]{DISABLED_NOTINSTALLED}: Allocated
|
13
|
DTS DEBUG <0010> fsm.c:461 timeslot[0x556b6665fc90]{NOT_INITIALIZED}: Allocated
|
14
|
DNM INFO <0004> fsm.c:461 NM_CHAN_OP[0x556b6665fe40]{DISABLED_NOTINSTALLED}: Allocated
|
15
|
DTS DEBUG <0010> fsm.c:461 timeslot[0x556b66660490]{NOT_INITIALIZED}: Allocated
|
16
|
DNM INFO <0004> fsm.c:461 NM_CHAN_OP[0x556b66660640]{DISABLED_NOTINSTALLED}: Allocated
|
17
|
DTS DEBUG <0010> fsm.c:461 timeslot[0x556b66660d20]{NOT_INITIALIZED}: Allocated
|
18
|
DNM INFO <0004> fsm.c:461 NM_CHAN_OP[0x556b66660ed0]{DISABLED_NOTINSTALLED}: Allocated
|
19
|
DTS DEBUG <0010> fsm.c:461 timeslot[0x556b666615b0]{NOT_INITIALIZED}: Allocated
|
20
|
DNM INFO <0004> fsm.c:461 NM_CHAN_OP[0x556b66661760]{DISABLED_NOTINSTALLED}: Allocated
|
21
|
DTS DEBUG <0010> fsm.c:461 timeslot[0x556b66661e40]{NOT_INITIALIZED}: Allocated
|
22
|
DNM INFO <0004> fsm.c:461 NM_CHAN_OP[0x556b66661ff0]{DISABLED_NOTINSTALLED}: Allocated
|
23
|
DRSL INFO <0003> acc.c:108 (bts=0) ACC: New ACC allowed subset 0x3ff (active_len=10, ramp_len=10, adm_len=10, perm_len=10, rotation=off)
|
24
|
DNM INFO <0004> fsm.c:461 NM_RCARRIER_OP[0x556b66663790]{DISABLED_NOTINSTALLED}: Allocated
|
25
|
DNM INFO <0004> fsm.c:461 NM_BB_TRANSC_OP[0x556b666638c0]{DISABLED_NOTINSTALLED}: Allocated
|
26
|
DTS DEBUG <0010> fsm.c:461 timeslot[0x556b666639f0]{NOT_INITIALIZED}: Allocated
|
27
|
DNM INFO <0004> fsm.c:461 NM_CHAN_OP[0x556b66663b20]{DISABLED_NOTINSTALLED}: Allocated
|
28
|
DTS DEBUG <0010> fsm.c:461 timeslot[0x556b66663ef0]{NOT_INITIALIZED}: Allocated
|
29
|
DNM INFO <0004> fsm.c:461 NM_CHAN_OP[0x556b666640a0]{DISABLED_NOTINSTALLED}: Allocated
|
30
|
DTS DEBUG <0010> fsm.c:461 timeslot[0x556b666646f0]{NOT_INITIALIZED}: Allocated
|
31
|
DNM INFO <0004> fsm.c:461 NM_CHAN_OP[0x556b666648a0]{DISABLED_NOTINSTALLED}: Allocated
|
32
|
DTS DEBUG <0010> fsm.c:461 timeslot[0x556b66664ef0]{NOT_INITIALIZED}: Allocated
|
33
|
DNM INFO <0004> fsm.c:461 NM_CHAN_OP[0x556b666650a0]{DISABLED_NOTINSTALLED}: Allocated
|
34
|
DTS DEBUG <0010> fsm.c:461 timeslot[0x556b666656f0]{NOT_INITIALIZED}: Allocated
|
35
|
DNM INFO <0004> fsm.c:461 NM_CHAN_OP[0x556b666658a0]{DISABLED_NOTINSTALLED}: Allocated
|
36
|
DTS DEBUG <0010> fsm.c:461 timeslot[0x556b66665ef0]{NOT_INITIALIZED}: Allocated
|
37
|
DNM INFO <0004> fsm.c:461 NM_CHAN_OP[0x556b666660a0]{DISABLED_NOTINSTALLED}: Allocated
|
38
|
DTS DEBUG <0010> fsm.c:461 timeslot[0x556b666666f0]{NOT_INITIALIZED}: Allocated
|
39
|
DNM INFO <0004> fsm.c:461 NM_CHAN_OP[0x556b666668a0]{DISABLED_NOTINSTALLED}: Allocated
|
40
|
DTS DEBUG <0010> fsm.c:461 timeslot[0x556b66666f80]{NOT_INITIALIZED}: Allocated
|
41
|
DNM INFO <0004> fsm.c:461 NM_CHAN_OP[0x556b66667130]{DISABLED_NOTINSTALLED}: Allocated
|
42
|
DNM INFO <0004> fsm.c:461 NM_RCARRIER_OP[0x556b66667ef0]{DISABLED_NOTINSTALLED}: Allocated
|
43
|
DNM INFO <0004> fsm.c:461 NM_BB_TRANSC_OP[0x556b666680c0]{DISABLED_NOTINSTALLED}: Allocated
|
44
|
DTS DEBUG <0010> fsm.c:461 timeslot[0x556b66668290]{NOT_INITIALIZED}: Allocated
|
45
|
DNM INFO <0004> fsm.c:461 NM_CHAN_OP[0x556b666683c0]{DISABLED_NOTINSTALLED}: Allocated
|
46
|
DTS DEBUG <0010> fsm.c:461 timeslot[0x556b66668810]{NOT_INITIALIZED}: Allocated
|
47
|
DNM INFO <0004> fsm.c:461 NM_CHAN_OP[0x556b666689c0]{DISABLED_NOTINSTALLED}: Allocated
|
48
|
DTS DEBUG <0010> fsm.c:461 timeslot[0x556b66669010]{NOT_INITIALIZED}: Allocated
|
49
|
DNM INFO <0004> fsm.c:461 NM_CHAN_OP[0x556b666691c0]{DISABLED_NOTINSTALLED}: Allocated
|
50
|
DTS DEBUG <0010> fsm.c:461 timeslot[0x556b66669810]{NOT_INITIALIZED}: Allocated
|
51
|
DNM INFO <0004> fsm.c:461 NM_CHAN_OP[0x556b666699c0]{DISABLED_NOTINSTALLED}: Allocated
|
52
|
DTS DEBUG <0010> fsm.c:461 timeslot[0x556b6666a010]{NOT_INITIALIZED}: Allocated
|
53
|
DNM INFO <0004> fsm.c:461 NM_CHAN_OP[0x556b6666a1c0]{DISABLED_NOTINSTALLED}: Allocated
|
54
|
DTS DEBUG <0010> fsm.c:461 timeslot[0x556b6666a810]{NOT_INITIALIZED}: Allocated
|
55
|
DNM INFO <0004> fsm.c:461 NM_CHAN_OP[0x556b6666a9c0]{DISABLED_NOTINSTALLED}: Allocated
|
56
|
DTS DEBUG <0010> fsm.c:461 timeslot[0x556b6666b010]{NOT_INITIALIZED}: Allocated
|
57
|
DNM INFO <0004> fsm.c:461 NM_CHAN_OP[0x556b6666b1c0]{DISABLED_NOTINSTALLED}: Allocated
|
58
|
DTS DEBUG <0010> fsm.c:461 timeslot[0x556b6666b8a0]{NOT_INITIALIZED}: Allocated
|
59
|
DNM INFO <0004> fsm.c:461 NM_CHAN_OP[0x556b6666ba50]{DISABLED_NOTINSTALLED}: Allocated
|
60
|
DNM INFO <0004> fsm.c:461 NM_RCARRIER_OP[0x556b6666c8b0]{DISABLED_NOTINSTALLED}: Allocated
|
61
|
DNM INFO <0004> fsm.c:461 NM_BB_TRANSC_OP[0x556b6666ca80]{DISABLED_NOTINSTALLED}: Allocated
|
62
|
DTS DEBUG <0010> fsm.c:461 timeslot[0x556b6666cc50]{NOT_INITIALIZED}: Allocated
|
63
|
DNM INFO <0004> fsm.c:461 NM_CHAN_OP[0x556b6666cd80]{DISABLED_NOTINSTALLED}: Allocated
|
64
|
DTS DEBUG <0010> fsm.c:461 timeslot[0x556b6666d150]{NOT_INITIALIZED}: Allocated
|
65
|
DNM INFO <0004> fsm.c:461 NM_CHAN_OP[0x556b6666d300]{DISABLED_NOTINSTALLED}: Allocated
|
66
|
DTS DEBUG <0010> fsm.c:461 timeslot[0x556b6666d950]{NOT_INITIALIZED}: Allocated
|
67
|
DNM INFO <0004> fsm.c:461 NM_CHAN_OP[0x556b6666db00]{DISABLED_NOTINSTALLED}: Allocated
|
68
|
DTS DEBUG <0010> fsm.c:461 timeslot[0x556b6666e150]{NOT_INITIALIZED}: Allocated
|
69
|
DNM INFO <0004> fsm.c:461 NM_CHAN_OP[0x556b6666e300]{DISABLED_NOTINSTALLED}: Allocated
|
70
|
DTS DEBUG <0010> fsm.c:461 timeslot[0x556b6666e950]{NOT_INITIALIZED}: Allocated
|
71
|
DNM INFO <0004> fsm.c:461 NM_CHAN_OP[0x556b6666eb00]{DISABLED_NOTINSTALLED}: Allocated
|
72
|
DTS DEBUG <0010> fsm.c:461 timeslot[0x556b6666f150]{NOT_INITIALIZED}: Allocated
|
73
|
DNM INFO <0004> fsm.c:461 NM_CHAN_OP[0x556b6666f300]{DISABLED_NOTINSTALLED}: Allocated
|
74
|
DTS DEBUG <0010> fsm.c:461 timeslot[0x556b6666f950]{NOT_INITIALIZED}: Allocated
|
75
|
DNM INFO <0004> fsm.c:461 NM_CHAN_OP[0x556b6666fb00]{DISABLED_NOTINSTALLED}: Allocated
|
76
|
DTS DEBUG <0010> fsm.c:461 timeslot[0x556b666701e0]{NOT_INITIALIZED}: Allocated
|
77
|
DNM INFO <0004> fsm.c:461 NM_CHAN_OP[0x556b66670390]{DISABLED_NOTINSTALLED}: Allocated
|
78
|
DLGLOBAL DEBUG <0015> rate_ctr.c:88 validating counter group 0x7fb5692b34e0(e1inp) with 5 counters
|
79
|
DLINP INFO <0017> e1_input.c:466 E1L(0) Line (0x556b666711f0) reference count ctor changed 0 -> 1 [1 (ctor)]
|
80
|
DLGLOBAL NOTICE <0015> telnet_interface.c:104 Available via telnet 127.0.0.1 4242
|
81
|
DLMI DEBUG <0019> e1_config.c:161 (bts=0) e1_reconfig_bts
|
82
|
DLINP INFO <0017> e1_input.c:612 E1L(0) Line (0x556b666711f0) reference count e1inp_sign_link changed 0 -> 1 [2 (ctor,e1inp_sign_link)]
|
83
|
DLINP INFO <0017> e1_input.c:612 E1L(0) Line (0x556b666711f0) reference count e1inp_sign_link changed 1 -> 2 [3 (ctor,2*e1inp_sign_link)]
|
84
|
DLINP INFO <0017> e1_input.c:612 E1L(0) Line (0x556b666711f0) reference count e1inp_sign_link changed 2 -> 3 [4 (ctor,3*e1inp_sign_link)]
|
85
|
DLMI DEBUG <0019> e1_config.c:48 e1_reconfig_ts(0,0,0)
|
86
|
DLMI DEBUG <0019> e1_config.c:48 e1_reconfig_ts(0,0,1)
|
87
|
DLMI DEBUG <0019> e1_config.c:48 e1_reconfig_ts(0,0,2)
|
88
|
DLMI DEBUG <0019> e1_config.c:48 e1_reconfig_ts(0,0,3)
|
89
|
DLMI DEBUG <0019> e1_config.c:48 e1_reconfig_ts(0,0,4)
|
90
|
DLMI DEBUG <0019> e1_config.c:48 e1_reconfig_ts(0,0,5)
|
91
|
DLMI DEBUG <0019> e1_config.c:48 e1_reconfig_ts(0,0,6)
|
92
|
DLMI DEBUG <0019> e1_config.c:48 e1_reconfig_ts(0,0,7)
|
93
|
DLINP INFO <0017> e1_input.c:612 E1L(0) Line (0x556b666711f0) reference count e1inp_sign_link changed 3 -> 4 [5 (ctor,4*e1inp_sign_link)]
|
94
|
DLINP INFO <0017> e1_input.c:612 E1L(0) Line (0x556b666711f0) reference count e1inp_sign_link changed 4 -> 5 [6 (ctor,5*e1inp_sign_link)]
|
95
|
DLMI DEBUG <0019> e1_config.c:48 e1_reconfig_ts(0,1,0)
|
96
|
DLMI DEBUG <0019> e1_config.c:48 e1_reconfig_ts(0,1,1)
|
97
|
DLMI DEBUG <0019> e1_config.c:48 e1_reconfig_ts(0,1,2)
|
98
|
DLMI DEBUG <0019> e1_config.c:48 e1_reconfig_ts(0,1,3)
|
99
|
DLMI DEBUG <0019> e1_config.c:48 e1_reconfig_ts(0,1,4)
|
100
|
DLMI DEBUG <0019> e1_config.c:48 e1_reconfig_ts(0,1,5)
|
101
|
DLMI DEBUG <0019> e1_config.c:48 e1_reconfig_ts(0,1,6)
|
102
|
DLMI DEBUG <0019> e1_config.c:48 e1_reconfig_ts(0,1,7)
|
103
|
DLINP INFO <0017> e1_input.c:612 E1L(0) Line (0x556b666711f0) reference count e1inp_sign_link changed 5 -> 6 [7 (ctor,6*e1inp_sign_link)]
|
104
|
DLINP INFO <0017> e1_input.c:612 E1L(0) Line (0x556b666711f0) reference count e1inp_sign_link changed 6 -> 7 [8 (ctor,7*e1inp_sign_link)]
|
105
|
DLMI DEBUG <0019> e1_config.c:48 e1_reconfig_ts(0,2,0)
|
106
|
DLMI DEBUG <0019> e1_config.c:48 e1_reconfig_ts(0,2,1)
|
107
|
DLMI DEBUG <0019> e1_config.c:48 e1_reconfig_ts(0,2,2)
|
108
|
DLMI DEBUG <0019> e1_config.c:48 e1_reconfig_ts(0,2,3)
|
109
|
DLMI DEBUG <0019> e1_config.c:48 e1_reconfig_ts(0,2,4)
|
110
|
DLMI DEBUG <0019> e1_config.c:48 e1_reconfig_ts(0,2,5)
|
111
|
DLMI DEBUG <0019> e1_config.c:48 e1_reconfig_ts(0,2,6)
|
112
|
DLMI DEBUG <0019> e1_config.c:48 e1_reconfig_ts(0,2,7)
|
113
|
DLINP INFO <0017> e1_input.c:612 E1L(0) Line (0x556b666711f0) reference count e1inp_sign_link changed 7 -> 8 [9 (ctor,8*e1inp_sign_link)]
|
114
|
DLINP INFO <0017> e1_input.c:612 E1L(0) Line (0x556b666711f0) reference count e1inp_sign_link changed 8 -> 9 [10 (ctor,9*e1inp_sign_link)]
|
115
|
DLMI DEBUG <0019> e1_config.c:48 e1_reconfig_ts(0,3,0)
|
116
|
DLMI DEBUG <0019> e1_config.c:48 e1_reconfig_ts(0,3,1)
|
117
|
DLMI DEBUG <0019> e1_config.c:48 e1_reconfig_ts(0,3,2)
|
118
|
DLMI DEBUG <0019> e1_config.c:48 e1_reconfig_ts(0,3,3)
|
119
|
DLMI DEBUG <0019> e1_config.c:48 e1_reconfig_ts(0,3,4)
|
120
|
DLMI DEBUG <0019> e1_config.c:48 e1_reconfig_ts(0,3,5)
|
121
|
DLMI DEBUG <0019> e1_config.c:48 e1_reconfig_ts(0,3,6)
|
122
|
DLMI DEBUG <0019> e1_config.c:48 e1_reconfig_ts(0,3,7)
|
123
|
DNM DEBUG <0004> bts_ericsson_rbs2000.c:126 inp_sig_cb(): Input signal 'LINE-INIT' received
|
124
|
DLLAPD INFO <0016> input/lapd.c:194 (0:1-T62): LAPD state change on TEI 62: NONE -> ASSIGNED
|
125
|
DLLAPD NOTICE <0016> input/lapd.c:251 (0:1-T62-S62): LAPD Allocating SAP for SAPI=62 / TEI=62 (dl=0x556b664578f0, sap=0x556b664578d0)
|
126
|
DLLAPD NOTICE <0016> input/lapd.c:261 (0:1-T62-S62): k=1 N200=50 N201=260 T200=0.300000 T203=10.0
|
127
|
DLLAPD INFO <0016> lapd_core.c:314 ((0:1-T62-S62)) Init DL layer: sequence range = 128, k = 1, history range = 2
|
128
|
DLLAPD INFO <0016> lapd_core.c:239 ((0:1-T62-S62)) new state LAPD_STATE_NULL -> LAPD_STATE_IDLE
|
129
|
DLLAPD NOTICE <0016> input/lapd.c:523 (0:1-T62-S62): LAPD DL-ESTABLISH request TEI=62 SAPI=62
|
130
|
DLLAPD INFO <0016> lapd_core.c:2233 ((0:1-T62-S62)) Message DL-ESTABLISH-REQUEST received in state LAPD_STATE_IDLE
|
131
|
DLLAPD INFO <0016> lapd_core.c:1756 ((0:1-T62-S62)) perform normal establishm. (SABM)
|
132
|
DLLAPD INFO <0016> lapd_core.c:239 ((0:1-T62-S62)) new state LAPD_STATE_IDLE -> LAPD_STATE_SABM_SENT
|
133
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T62-S62)) TX: fa 7d 7f
|
134
|
DLLAPD INFO <0016> lapd_core.c:208 ((0:1-T62-S62)) start T200 (timeout=0.300000s)
|
135
|
DLLAPD INFO <0016> input/lapd.c:194 (0:1-T0): LAPD state change on TEI 0: NONE -> ASSIGNED
|
136
|
DLLAPD NOTICE <0016> input/lapd.c:251 (0:1-T0-S62): LAPD Allocating SAP for SAPI=62 / TEI=0 (dl=0x556b66454c00, sap=0x556b66454be0)
|
137
|
DLLAPD NOTICE <0016> input/lapd.c:261 (0:1-T0-S62): k=1 N200=50 N201=260 T200=0.300000 T203=10.0
|
138
|
DLLAPD INFO <0016> lapd_core.c:314 ((0:1-T0-S62)) Init DL layer: sequence range = 128, k = 1, history range = 2
|
139
|
DLLAPD INFO <0016> lapd_core.c:239 ((0:1-T0-S62)) new state LAPD_STATE_NULL -> LAPD_STATE_IDLE
|
140
|
DLLAPD NOTICE <0016> input/lapd.c:523 (0:1-T0-S62): LAPD DL-ESTABLISH request TEI=0 SAPI=62
|
141
|
DLLAPD INFO <0016> lapd_core.c:2233 ((0:1-T0-S62)) Message DL-ESTABLISH-REQUEST received in state LAPD_STATE_IDLE
|
142
|
DLLAPD INFO <0016> lapd_core.c:1756 ((0:1-T0-S62)) perform normal establishm. (SABM)
|
143
|
DLLAPD INFO <0016> lapd_core.c:239 ((0:1-T0-S62)) new state LAPD_STATE_IDLE -> LAPD_STATE_SABM_SENT
|
144
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T0-S62)) TX: fa 01 7f
|
145
|
DLLAPD INFO <0016> lapd_core.c:208 ((0:1-T0-S62)) start T200 (timeout=0.300000s)
|
146
|
DLLAPD NOTICE <0016> input/lapd.c:251 (0:1-T0-S0): LAPD Allocating SAP for SAPI=0 / TEI=0 (dl=0x556b666568b0, sap=0x556b66656890)
|
147
|
DLLAPD NOTICE <0016> input/lapd.c:261 (0:1-T0-S0): k=2 N200=50 N201=260 T200=0.300000 T203=10.0
|
148
|
DLLAPD INFO <0016> lapd_core.c:314 ((0:1-T0-S0)) Init DL layer: sequence range = 128, k = 2, history range = 4
|
149
|
DLLAPD INFO <0016> lapd_core.c:239 ((0:1-T0-S0)) new state LAPD_STATE_NULL -> LAPD_STATE_IDLE
|
150
|
DLLAPD NOTICE <0016> input/lapd.c:523 (0:1-T0-S0): LAPD DL-ESTABLISH request TEI=0 SAPI=0
|
151
|
DLLAPD INFO <0016> lapd_core.c:2233 ((0:1-T0-S0)) Message DL-ESTABLISH-REQUEST received in state LAPD_STATE_IDLE
|
152
|
DLLAPD INFO <0016> lapd_core.c:1756 ((0:1-T0-S0)) perform normal establishm. (SABM)
|
153
|
DLLAPD INFO <0016> lapd_core.c:239 ((0:1-T0-S0)) new state LAPD_STATE_IDLE -> LAPD_STATE_SABM_SENT
|
154
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T0-S0)) TX: 02 01 7f
|
155
|
DLLAPD INFO <0016> lapd_core.c:208 ((0:1-T0-S0)) start T200 (timeout=0.300000s)
|
156
|
DLLAPD INFO <0016> input/lapd.c:194 (0:4-T1): LAPD state change on TEI 1: NONE -> ASSIGNED
|
157
|
DLLAPD NOTICE <0016> input/lapd.c:251 (0:4-T1-S62): LAPD Allocating SAP for SAPI=62 / TEI=1 (dl=0x556b6667d130, sap=0x556b6667d110)
|
158
|
DLLAPD NOTICE <0016> input/lapd.c:261 (0:4-T1-S62): k=1 N200=50 N201=260 T200=0.300000 T203=10.0
|
159
|
DLLAPD INFO <0016> lapd_core.c:314 ((0:4-T1-S62)) Init DL layer: sequence range = 128, k = 1, history range = 2
|
160
|
DLLAPD INFO <0016> lapd_core.c:239 ((0:4-T1-S62)) new state LAPD_STATE_NULL -> LAPD_STATE_IDLE
|
161
|
DLLAPD NOTICE <0016> input/lapd.c:523 (0:4-T1-S62): LAPD DL-ESTABLISH request TEI=1 SAPI=62
|
162
|
DLLAPD INFO <0016> lapd_core.c:2233 ((0:4-T1-S62)) Message DL-ESTABLISH-REQUEST received in state LAPD_STATE_IDLE
|
163
|
DLLAPD INFO <0016> lapd_core.c:1756 ((0:4-T1-S62)) perform normal establishm. (SABM)
|
164
|
DLLAPD INFO <0016> lapd_core.c:239 ((0:4-T1-S62)) new state LAPD_STATE_IDLE -> LAPD_STATE_SABM_SENT
|
165
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:4-T1-S62)) TX: fa 03 7f
|
166
|
DLLAPD INFO <0016> lapd_core.c:208 ((0:4-T1-S62)) start T200 (timeout=0.300000s)
|
167
|
DLLAPD NOTICE <0016> input/lapd.c:251 (0:4-T1-S0): LAPD Allocating SAP for SAPI=0 / TEI=1 (dl=0x556b6667d480, sap=0x556b6667d460)
|
168
|
DLLAPD NOTICE <0016> input/lapd.c:261 (0:4-T1-S0): k=2 N200=50 N201=260 T200=0.300000 T203=10.0
|
169
|
DLLAPD INFO <0016> lapd_core.c:314 ((0:4-T1-S0)) Init DL layer: sequence range = 128, k = 2, history range = 4
|
170
|
DLLAPD INFO <0016> lapd_core.c:239 ((0:4-T1-S0)) new state LAPD_STATE_NULL -> LAPD_STATE_IDLE
|
171
|
DLLAPD NOTICE <0016> input/lapd.c:523 (0:4-T1-S0): LAPD DL-ESTABLISH request TEI=1 SAPI=0
|
172
|
DLLAPD INFO <0016> lapd_core.c:2233 ((0:4-T1-S0)) Message DL-ESTABLISH-REQUEST received in state LAPD_STATE_IDLE
|
173
|
DLLAPD INFO <0016> lapd_core.c:1756 ((0:4-T1-S0)) perform normal establishm. (SABM)
|
174
|
DLLAPD INFO <0016> lapd_core.c:239 ((0:4-T1-S0)) new state LAPD_STATE_IDLE -> LAPD_STATE_SABM_SENT
|
175
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:4-T1-S0)) TX: 02 03 7f
|
176
|
DLLAPD INFO <0016> lapd_core.c:208 ((0:4-T1-S0)) start T200 (timeout=0.300000s)
|
177
|
DLLAPD INFO <0016> input/lapd.c:194 (0:7-T2): LAPD state change on TEI 2: NONE -> ASSIGNED
|
178
|
DLLAPD NOTICE <0016> input/lapd.c:251 (0:7-T2-S62): LAPD Allocating SAP for SAPI=62 / TEI=2 (dl=0x556b6667d880, sap=0x556b6667d860)
|
179
|
DLLAPD NOTICE <0016> input/lapd.c:261 (0:7-T2-S62): k=1 N200=50 N201=260 T200=0.300000 T203=10.0
|
180
|
DLLAPD INFO <0016> lapd_core.c:314 ((0:7-T2-S62)) Init DL layer: sequence range = 128, k = 1, history range = 2
|
181
|
DLLAPD INFO <0016> lapd_core.c:239 ((0:7-T2-S62)) new state LAPD_STATE_NULL -> LAPD_STATE_IDLE
|
182
|
DLLAPD NOTICE <0016> input/lapd.c:523 (0:7-T2-S62): LAPD DL-ESTABLISH request TEI=2 SAPI=62
|
183
|
DLLAPD INFO <0016> lapd_core.c:2233 ((0:7-T2-S62)) Message DL-ESTABLISH-REQUEST received in state LAPD_STATE_IDLE
|
184
|
DLLAPD INFO <0016> lapd_core.c:1756 ((0:7-T2-S62)) perform normal establishm. (SABM)
|
185
|
DLLAPD INFO <0016> lapd_core.c:239 ((0:7-T2-S62)) new state LAPD_STATE_IDLE -> LAPD_STATE_SABM_SENT
|
186
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:7-T2-S62)) TX: fa 05 7f
|
187
|
DLLAPD INFO <0016> lapd_core.c:208 ((0:7-T2-S62)) start T200 (timeout=0.300000s)
|
188
|
DLLAPD NOTICE <0016> input/lapd.c:251 (0:7-T2-S0): LAPD Allocating SAP for SAPI=0 / TEI=2 (dl=0x556b6667dbd0, sap=0x556b6667dbb0)
|
189
|
DLLAPD NOTICE <0016> input/lapd.c:261 (0:7-T2-S0): k=2 N200=50 N201=260 T200=0.300000 T203=10.0
|
190
|
DLLAPD INFO <0016> lapd_core.c:314 ((0:7-T2-S0)) Init DL layer: sequence range = 128, k = 2, history range = 4
|
191
|
DLLAPD INFO <0016> lapd_core.c:239 ((0:7-T2-S0)) new state LAPD_STATE_NULL -> LAPD_STATE_IDLE
|
192
|
DLLAPD NOTICE <0016> input/lapd.c:523 (0:7-T2-S0): LAPD DL-ESTABLISH request TEI=2 SAPI=0
|
193
|
DLLAPD INFO <0016> lapd_core.c:2233 ((0:7-T2-S0)) Message DL-ESTABLISH-REQUEST received in state LAPD_STATE_IDLE
|
194
|
DLLAPD INFO <0016> lapd_core.c:1756 ((0:7-T2-S0)) perform normal establishm. (SABM)
|
195
|
DLLAPD INFO <0016> lapd_core.c:239 ((0:7-T2-S0)) new state LAPD_STATE_IDLE -> LAPD_STATE_SABM_SENT
|
196
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:7-T2-S0)) TX: 02 05 7f
|
197
|
DLLAPD INFO <0016> lapd_core.c:208 ((0:7-T2-S0)) start T200 (timeout=0.300000s)
|
198
|
DLLAPD INFO <0016> input/lapd.c:194 (0:10-T3): LAPD state change on TEI 3: NONE -> ASSIGNED
|
199
|
DLLAPD NOTICE <0016> input/lapd.c:251 (0:10-T3-S62): LAPD Allocating SAP for SAPI=62 / TEI=3 (dl=0x556b6667e070, sap=0x556b6667e050)
|
200
|
DLLAPD NOTICE <0016> input/lapd.c:261 (0:10-T3-S62): k=1 N200=50 N201=260 T200=0.300000 T203=10.0
|
201
|
DLLAPD INFO <0016> lapd_core.c:314 ((0:10-T3-S62)) Init DL layer: sequence range = 128, k = 1, history range = 2
|
202
|
DLLAPD INFO <0016> lapd_core.c:239 ((0:10-T3-S62)) new state LAPD_STATE_NULL -> LAPD_STATE_IDLE
|
203
|
DLLAPD NOTICE <0016> input/lapd.c:523 (0:10-T3-S62): LAPD DL-ESTABLISH request TEI=3 SAPI=62
|
204
|
DLLAPD INFO <0016> lapd_core.c:2233 ((0:10-T3-S62)) Message DL-ESTABLISH-REQUEST received in state LAPD_STATE_IDLE
|
205
|
DLLAPD INFO <0016> lapd_core.c:1756 ((0:10-T3-S62)) perform normal establishm. (SABM)
|
206
|
DLLAPD INFO <0016> lapd_core.c:239 ((0:10-T3-S62)) new state LAPD_STATE_IDLE -> LAPD_STATE_SABM_SENT
|
207
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:10-T3-S62)) TX: fa 07 7f
|
208
|
DLLAPD INFO <0016> lapd_core.c:208 ((0:10-T3-S62)) start T200 (timeout=0.300000s)
|
209
|
DLLAPD NOTICE <0016> input/lapd.c:251 (0:10-T3-S0): LAPD Allocating SAP for SAPI=0 / TEI=3 (dl=0x556b6667e3c0, sap=0x556b6667e3a0)
|
210
|
DLLAPD NOTICE <0016> input/lapd.c:261 (0:10-T3-S0): k=2 N200=50 N201=260 T200=0.300000 T203=10.0
|
211
|
DLLAPD INFO <0016> lapd_core.c:314 ((0:10-T3-S0)) Init DL layer: sequence range = 128, k = 2, history range = 4
|
212
|
DLLAPD INFO <0016> lapd_core.c:239 ((0:10-T3-S0)) new state LAPD_STATE_NULL -> LAPD_STATE_IDLE
|
213
|
DLLAPD NOTICE <0016> input/lapd.c:523 (0:10-T3-S0): LAPD DL-ESTABLISH request TEI=3 SAPI=0
|
214
|
DLLAPD INFO <0016> lapd_core.c:2233 ((0:10-T3-S0)) Message DL-ESTABLISH-REQUEST received in state LAPD_STATE_IDLE
|
215
|
DLLAPD INFO <0016> lapd_core.c:1756 ((0:10-T3-S0)) perform normal establishm. (SABM)
|
216
|
DLLAPD INFO <0016> lapd_core.c:239 ((0:10-T3-S0)) new state LAPD_STATE_IDLE -> LAPD_STATE_SABM_SENT
|
217
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:10-T3-S0)) TX: 02 07 7f
|
218
|
DLLAPD INFO <0016> lapd_core.c:208 ((0:10-T3-S0)) start T200 (timeout=0.300000s)
|
219
|
DLMI DEBUG <0019> osmo_bsc_main.c:386 inp_sig_cb(): Input signal 'LINE-INIT' received
|
220
|
DLCTRL NOTICE <001c> control_if.c:911 CTRL at 127.0.0.1 4249
|
221
|
DLMGCP NOTICE <0025> mgcp_client.c:780 MGCP client: using endpoint domain '@mgw'
|
222
|
DLMGCP INFO <0025> mgcp_client.c:851 MGCP GW connection: r=127.0.0.1:2427<->l=127.0.0.1:2727
|
223
|
DHODEC DEBUG <0009> handover_decision_2.c:163 HO algorithm 2: next periodical congestion check in 10 seconds
|
224
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 3, sapi(0) tei(0)
|
225
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: 02 01 73
|
226
|
DLLAPD INFO <0016> lapd_core.c:1170 ((0:1-T0-S0)) UA received in state LAPD_STATE_SABM_SENT
|
227
|
DLLAPD INFO <0016> lapd_core.c:1224 ((0:1-T0-S0)) UA in SABM state
|
228
|
DLLAPD INFO <0016> lapd_core.c:224 ((0:1-T0-S0)) stop T200
|
229
|
DLLAPD INFO <0016> lapd_core.c:239 ((0:1-T0-S0)) new state LAPD_STATE_SABM_SENT -> LAPD_STATE_MF_EST
|
230
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T0-S0)) start T203
|
231
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T0-S0)) lapd_send_i() called from line 1250
|
232
|
DLLAPD NOTICE <0016> input/lapd.c:659 ((0:1-T0-S0)) LAPD DL-ESTABLISH confirm TEI=0 SAPI=0
|
233
|
DLMI DEBUG <0019> e1_input.c:739 E1TS(0:1) DL_EST: sapi(0) tei(0)
|
234
|
DNM DEBUG <0004> bts_ericsson_rbs2000.c:126 inp_sig_cb(): Input signal 'TEI-UP' received
|
235
|
DLMI DEBUG <0019> osmo_bsc_main.c:386 inp_sig_cb(): Input signal 'TEI-UP' received
|
236
|
DRSL NOTICE <0003> osmo_bsc_main.c:318 (bts=0,trx=0) bootstrapping RSL on ARFCN 123 using MCC-MNC 901-70 LAC=1 CID=0 BSIC=63
|
237
|
DRR INFO <0002> system_information.c:697 Serving cell: 119 121 123
|
238
|
DRR DEBUG <0002> bts_trx.c:332 SI1: 55 06 19 05 40 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e5 04 00 2b
|
239
|
DRR DEBUG <0002> bts_trx.c:332 SI2: 59 06 1a 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ff e5 04 00
|
240
|
DRR DEBUG <0002> bts_trx.c:334 SI2bis: OFF
|
241
|
DRR DEBUG <0002> bts_trx.c:334 SI2ter: OFF
|
242
|
DRR DEBUG <0002> bts_trx.c:334 SI2quater: OFF
|
243
|
DRR DEBUG <0002> bts_trx.c:332 SI3: 49 06 1b 00 00 09 f1 07 00 01 c9 03 05 27 4e 00 e5 04 00 29 2b 2b 2b
|
244
|
DRR DEBUG <0002> bts_trx.c:332 SI4: 31 06 1c 09 f1 07 00 01 4e 00 e5 04 00 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b
|
245
|
DRR DEBUG <0002> bts_trx.c:332 SI5: 06 1d 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 2b 2b 2b 2b 2b
|
246
|
DRR DEBUG <0002> bts_trx.c:334 SI5bis: OFF
|
247
|
DRR DEBUG <0002> bts_trx.c:334 SI5ter: OFF
|
248
|
DRR DEBUG <0002> bts_trx.c:332 SI6: 06 1e 00 00 09 f1 07 00 01 27 ff 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b
|
249
|
DTS DEBUG <0010> osmo_bsc_main.c:347 timeslot(0-0-0-NONE)[0x556b6665e710]{NOT_INITIALIZED}: Received Event TS_EV_RSL_READY
|
250
|
DTS DEBUG <0010> timeslot_fsm.c:242 timeslot(0-0-0-NONE)[0x556b6665e710]{NOT_INITIALIZED}: (pchan_is=NONE) OML not ready yet
|
251
|
DTS DEBUG <0010> osmo_bsc_main.c:347 timeslot(0-0-1-NONE)[0x556b6665ec90]{NOT_INITIALIZED}: Received Event TS_EV_RSL_READY
|
252
|
DTS DEBUG <0010> timeslot_fsm.c:242 timeslot(0-0-1-NONE)[0x556b6665ec90]{NOT_INITIALIZED}: (pchan_is=NONE) OML not ready yet
|
253
|
DTS DEBUG <0010> osmo_bsc_main.c:347 timeslot(0-0-2-NONE)[0x556b6665f490]{NOT_INITIALIZED}: Received Event TS_EV_RSL_READY
|
254
|
DTS DEBUG <0010> timeslot_fsm.c:242 timeslot(0-0-2-NONE)[0x556b6665f490]{NOT_INITIALIZED}: (pchan_is=NONE) OML not ready yet
|
255
|
DTS DEBUG <0010> osmo_bsc_main.c:347 timeslot(0-0-3-NONE)[0x556b6665fc90]{NOT_INITIALIZED}: Received Event TS_EV_RSL_READY
|
256
|
DTS DEBUG <0010> timeslot_fsm.c:242 timeslot(0-0-3-NONE)[0x556b6665fc90]{NOT_INITIALIZED}: (pchan_is=NONE) OML not ready yet
|
257
|
DTS DEBUG <0010> osmo_bsc_main.c:347 timeslot(0-0-4-NONE)[0x556b66660490]{NOT_INITIALIZED}: Received Event TS_EV_RSL_READY
|
258
|
DTS DEBUG <0010> timeslot_fsm.c:242 timeslot(0-0-4-NONE)[0x556b66660490]{NOT_INITIALIZED}: (pchan_is=NONE) OML not ready yet
|
259
|
DTS DEBUG <0010> osmo_bsc_main.c:347 timeslot(0-0-5-NONE)[0x556b66660d20]{NOT_INITIALIZED}: Received Event TS_EV_RSL_READY
|
260
|
DTS DEBUG <0010> timeslot_fsm.c:242 timeslot(0-0-5-NONE)[0x556b66660d20]{NOT_INITIALIZED}: (pchan_is=NONE) OML not ready yet
|
261
|
DTS DEBUG <0010> osmo_bsc_main.c:347 timeslot(0-0-6-NONE)[0x556b666615b0]{NOT_INITIALIZED}: Received Event TS_EV_RSL_READY
|
262
|
DTS DEBUG <0010> timeslot_fsm.c:242 timeslot(0-0-6-NONE)[0x556b666615b0]{NOT_INITIALIZED}: (pchan_is=NONE) OML not ready yet
|
263
|
DTS DEBUG <0010> osmo_bsc_main.c:347 timeslot(0-0-7-NONE)[0x556b66661e40]{NOT_INITIALIZED}: Received Event TS_EV_RSL_READY
|
264
|
DTS DEBUG <0010> timeslot_fsm.c:242 timeslot(0-0-7-NONE)[0x556b66661e40]{NOT_INITIALIZED}: (pchan_is=NONE) OML not ready yet
|
265
|
DCTRL DEBUG <000b> osmo_bsc_ctrl.c:283 BTS connection (re)established, sending TRAP.
|
266
|
DLMI ERROR <0019> input/dahdi.c:262 E1TS(0:1) TX: 0c 11 01 80 1e 01 27 17 55 06 19 05 40 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e5 04 00 2b
|
267
|
DLLAPD INFO <0016> lapd_core.c:2233 ((0:1-T0-S0)) Message DL-DATA-REQUEST received in state LAPD_STATE_MF_EST
|
268
|
DLLAPD INFO <0016> lapd_core.c:1816 ((0:1-T0-S0)) writing message to send-queue: l3len: 31
|
269
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T0-S0)) lapd_send_i() called from line 1822
|
270
|
DLLAPD INFO <0016> lapd_core.c:1877 ((0:1-T0-S0)) get message from send-queue
|
271
|
DLLAPD INFO <0016> lapd_core.c:1888 ((0:1-T0-S0)) msg-len 31 sent 0 left 31 N201 260 length 31 first byte 0c
|
272
|
DLLAPD INFO <0016> lapd_core.c:1897 ((0:1-T0-S0)) send I frame V(S)=0
|
273
|
DLLAPD INFO <0016> lapd_core.c:232 ((0:1-T0-S0)) stop T203
|
274
|
DLLAPD INFO <0016> lapd_core.c:208 ((0:1-T0-S0)) start T200 (timeout=0.300000s)
|
275
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T0-S0)) TX: 02 01 00 00 0c 11 01 80 1e 01 27 17 55 06 19 05 40 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e5 04 00 2b
|
276
|
DLLAPD INFO <0016> lapd_core.c:1888 ((0:1-T0-S0)) msg-len 31 sent 31 left 0 N201 260 length 0 first byte 0c
|
277
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 4, sapi(0) tei(0)
|
278
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: 02 01 01 02
|
279
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:1-T0-S0)) RR received in state LAPD_STATE_MF_EST
|
280
|
DLLAPD INFO <0016> lapd_core.c:765 ((0:1-T0-S0)) ack frame 0
|
281
|
DLLAPD INFO <0016> lapd_core.c:224 ((0:1-T0-S0)) stop T200
|
282
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T0-S0)) start T203
|
283
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T0-S0)) lapd_send_i() called from line 1373
|
284
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 14, sapi(0) tei(0)
|
285
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: 00 01 00 02 10 1c 1a 02 62 11 1c 11 01 80
|
286
|
DLLAPD INFO <0016> lapd_core.c:1520 ((0:1-T0-S0)) I received in state LAPD_STATE_MF_EST on SAPI(0)
|
287
|
DLLAPD INFO <0016> lapd_core.c:1606 ((0:1-T0-S0)) incrementing V(R) to 1
|
288
|
DLLAPD INFO <0016> lapd_core.c:232 ((0:1-T0-S0)) stop T203
|
289
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T0-S0)) start T203
|
290
|
DLLAPD INFO <0016> lapd_core.c:1615 ((0:1-T0-S0)) message in single I frame
|
291
|
DLMI DEBUG <0019> e1_input.c:752 E1TS(0:1) RX: 10 1c 1a 02 62 11 1c 11 01 80 sapi=0 tei=0
|
292
|
DLMI ERROR <0019> e1_config.c:133 (bts=0,trx=0) discarding RSL message received in locked administrative state
|
293
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T0-S0)) lapd_send_i() called from line 1672
|
294
|
DLLAPD INFO <0016> lapd_core.c:1681 ((0:1-T0-S0)) we are not busy and have no pending data, send RR
|
295
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T0-S0)) TX: 00 01 01 02
|
296
|
DLMI ERROR <0019> input/dahdi.c:262 E1TS(0:1) TX: 0c 11 01 80 1e 02 27 17 59 06 1a 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ff e5 04 00
|
297
|
DLLAPD INFO <0016> lapd_core.c:2233 ((0:1-T0-S0)) Message DL-DATA-REQUEST received in state LAPD_STATE_MF_EST
|
298
|
DLLAPD INFO <0016> lapd_core.c:1816 ((0:1-T0-S0)) writing message to send-queue: l3len: 31
|
299
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T0-S0)) lapd_send_i() called from line 1822
|
300
|
DLLAPD INFO <0016> lapd_core.c:1877 ((0:1-T0-S0)) get message from send-queue
|
301
|
DLLAPD INFO <0016> lapd_core.c:1888 ((0:1-T0-S0)) msg-len 31 sent 0 left 31 N201 260 length 31 first byte 0c
|
302
|
DLLAPD INFO <0016> lapd_core.c:1897 ((0:1-T0-S0)) send I frame V(S)=1
|
303
|
DLLAPD INFO <0016> lapd_core.c:232 ((0:1-T0-S0)) stop T203
|
304
|
DLLAPD INFO <0016> lapd_core.c:208 ((0:1-T0-S0)) start T200 (timeout=0.300000s)
|
305
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T0-S0)) TX: 02 01 02 02 0c 11 01 80 1e 02 27 17 59 06 1a 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ff e5 04 00
|
306
|
DLLAPD INFO <0016> lapd_core.c:1888 ((0:1-T0-S0)) msg-len 31 sent 31 left 0 N201 260 length 0 first byte 0c
|
307
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 4, sapi(0) tei(0)
|
308
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: 02 01 01 04
|
309
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:1-T0-S0)) RR received in state LAPD_STATE_MF_EST
|
310
|
DLLAPD INFO <0016> lapd_core.c:765 ((0:1-T0-S0)) ack frame 1
|
311
|
DLLAPD INFO <0016> lapd_core.c:224 ((0:1-T0-S0)) stop T200
|
312
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T0-S0)) start T203
|
313
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T0-S0)) lapd_send_i() called from line 1373
|
314
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 14, sapi(0) tei(0)
|
315
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: 00 01 02 04 10 1c 1a 02 62 11 1c 11 01 80
|
316
|
DLLAPD INFO <0016> lapd_core.c:1520 ((0:1-T0-S0)) I received in state LAPD_STATE_MF_EST on SAPI(0)
|
317
|
DLLAPD INFO <0016> lapd_core.c:1606 ((0:1-T0-S0)) incrementing V(R) to 2
|
318
|
DLLAPD INFO <0016> lapd_core.c:232 ((0:1-T0-S0)) stop T203
|
319
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T0-S0)) start T203
|
320
|
DLLAPD INFO <0016> lapd_core.c:1615 ((0:1-T0-S0)) message in single I frame
|
321
|
DLMI DEBUG <0019> e1_input.c:752 E1TS(0:1) RX: 10 1c 1a 02 62 11 1c 11 01 80 sapi=0 tei=0
|
322
|
DLMI ERROR <0019> e1_config.c:133 (bts=0,trx=0) discarding RSL message received in locked administrative state
|
323
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T0-S0)) lapd_send_i() called from line 1672
|
324
|
DLLAPD INFO <0016> lapd_core.c:1681 ((0:1-T0-S0)) we are not busy and have no pending data, send RR
|
325
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T0-S0)) TX: 00 01 01 04
|
326
|
DLMI ERROR <0019> input/dahdi.c:262 E1TS(0:1) TX: 0c 11 01 80 1e 0a
|
327
|
DLLAPD INFO <0016> lapd_core.c:2233 ((0:1-T0-S0)) Message DL-DATA-REQUEST received in state LAPD_STATE_MF_EST
|
328
|
DLLAPD INFO <0016> lapd_core.c:1816 ((0:1-T0-S0)) writing message to send-queue: l3len: 6
|
329
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T0-S0)) lapd_send_i() called from line 1822
|
330
|
DLLAPD INFO <0016> lapd_core.c:1877 ((0:1-T0-S0)) get message from send-queue
|
331
|
DLLAPD INFO <0016> lapd_core.c:1888 ((0:1-T0-S0)) msg-len 6 sent 0 left 6 N201 260 length 6 first byte 0c
|
332
|
DLLAPD INFO <0016> lapd_core.c:1897 ((0:1-T0-S0)) send I frame V(S)=2
|
333
|
DLLAPD INFO <0016> lapd_core.c:232 ((0:1-T0-S0)) stop T203
|
334
|
DLLAPD INFO <0016> lapd_core.c:208 ((0:1-T0-S0)) start T200 (timeout=0.300000s)
|
335
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T0-S0)) TX: 02 01 04 04 0c 11 01 80 1e 0a
|
336
|
DLLAPD INFO <0016> lapd_core.c:1888 ((0:1-T0-S0)) msg-len 6 sent 6 left 0 N201 260 length 0 first byte 0c
|
337
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 4, sapi(0) tei(0)
|
338
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: 02 01 01 06
|
339
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:1-T0-S0)) RR received in state LAPD_STATE_MF_EST
|
340
|
DLLAPD INFO <0016> lapd_core.c:765 ((0:1-T0-S0)) ack frame 2
|
341
|
DLLAPD INFO <0016> lapd_core.c:224 ((0:1-T0-S0)) stop T200
|
342
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T0-S0)) start T203
|
343
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T0-S0)) lapd_send_i() called from line 1373
|
344
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 14, sapi(0) tei(0)
|
345
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: 00 01 04 06 10 1c 1a 02 62 11 1c 11 01 80
|
346
|
DLLAPD INFO <0016> lapd_core.c:1520 ((0:1-T0-S0)) I received in state LAPD_STATE_MF_EST on SAPI(0)
|
347
|
DLLAPD INFO <0016> lapd_core.c:1606 ((0:1-T0-S0)) incrementing V(R) to 3
|
348
|
DLLAPD INFO <0016> lapd_core.c:232 ((0:1-T0-S0)) stop T203
|
349
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T0-S0)) start T203
|
350
|
DLLAPD INFO <0016> lapd_core.c:1615 ((0:1-T0-S0)) message in single I frame
|
351
|
DLMI DEBUG <0019> e1_input.c:752 E1TS(0:1) RX: 10 1c 1a 02 62 11 1c 11 01 80 sapi=0 tei=0
|
352
|
DLMI ERROR <0019> e1_config.c:133 (bts=0,trx=0) discarding RSL message received in locked administrative state
|
353
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T0-S0)) lapd_send_i() called from line 1672
|
354
|
DLLAPD INFO <0016> lapd_core.c:1681 ((0:1-T0-S0)) we are not busy and have no pending data, send RR
|
355
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T0-S0)) TX: 00 01 01 06
|
356
|
DLMI ERROR <0019> input/dahdi.c:262 E1TS(0:1) TX: 0c 11 01 80 1e 0b
|
357
|
DLLAPD INFO <0016> lapd_core.c:2233 ((0:1-T0-S0)) Message DL-DATA-REQUEST received in state LAPD_STATE_MF_EST
|
358
|
DLLAPD INFO <0016> lapd_core.c:1816 ((0:1-T0-S0)) writing message to send-queue: l3len: 6
|
359
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T0-S0)) lapd_send_i() called from line 1822
|
360
|
DLLAPD INFO <0016> lapd_core.c:1877 ((0:1-T0-S0)) get message from send-queue
|
361
|
DLLAPD INFO <0016> lapd_core.c:1888 ((0:1-T0-S0)) msg-len 6 sent 0 left 6 N201 260 length 6 first byte 0c
|
362
|
DLLAPD INFO <0016> lapd_core.c:1897 ((0:1-T0-S0)) send I frame V(S)=3
|
363
|
DLLAPD INFO <0016> lapd_core.c:232 ((0:1-T0-S0)) stop T203
|
364
|
DLLAPD INFO <0016> lapd_core.c:208 ((0:1-T0-S0)) start T200 (timeout=0.300000s)
|
365
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T0-S0)) TX: 02 01 06 06 0c 11 01 80 1e 0b
|
366
|
DLLAPD INFO <0016> lapd_core.c:1888 ((0:1-T0-S0)) msg-len 6 sent 6 left 0 N201 260 length 0 first byte 0c
|
367
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 4, sapi(0) tei(0)
|
368
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: 02 01 01 08
|
369
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:1-T0-S0)) RR received in state LAPD_STATE_MF_EST
|
370
|
DLLAPD INFO <0016> lapd_core.c:765 ((0:1-T0-S0)) ack frame 3
|
371
|
DLLAPD INFO <0016> lapd_core.c:224 ((0:1-T0-S0)) stop T200
|
372
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T0-S0)) start T203
|
373
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T0-S0)) lapd_send_i() called from line 1373
|
374
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 14, sapi(0) tei(0)
|
375
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: 00 01 06 08 10 1c 1a 02 62 11 1c 11 01 80
|
376
|
DLLAPD INFO <0016> lapd_core.c:1520 ((0:1-T0-S0)) I received in state LAPD_STATE_MF_EST on SAPI(0)
|
377
|
DLLAPD INFO <0016> lapd_core.c:1606 ((0:1-T0-S0)) incrementing V(R) to 4
|
378
|
DLLAPD INFO <0016> lapd_core.c:232 ((0:1-T0-S0)) stop T203
|
379
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T0-S0)) start T203
|
380
|
DLLAPD INFO <0016> lapd_core.c:1615 ((0:1-T0-S0)) message in single I frame
|
381
|
DLMI DEBUG <0019> e1_input.c:752 E1TS(0:1) RX: 10 1c 1a 02 62 11 1c 11 01 80 sapi=0 tei=0
|
382
|
DLMI ERROR <0019> e1_config.c:133 (bts=0,trx=0) discarding RSL message received in locked administrative state
|
383
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T0-S0)) lapd_send_i() called from line 1672
|
384
|
DLLAPD INFO <0016> lapd_core.c:1681 ((0:1-T0-S0)) we are not busy and have no pending data, send RR
|
385
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T0-S0)) TX: 00 01 01 08
|
386
|
DLMI ERROR <0019> input/dahdi.c:262 E1TS(0:1) TX: 0c 11 01 80 1e 29
|
387
|
DLLAPD INFO <0016> lapd_core.c:2233 ((0:1-T0-S0)) Message DL-DATA-REQUEST received in state LAPD_STATE_MF_EST
|
388
|
DLLAPD INFO <0016> lapd_core.c:1816 ((0:1-T0-S0)) writing message to send-queue: l3len: 6
|
389
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T0-S0)) lapd_send_i() called from line 1822
|
390
|
DLLAPD INFO <0016> lapd_core.c:1877 ((0:1-T0-S0)) get message from send-queue
|
391
|
DLLAPD INFO <0016> lapd_core.c:1888 ((0:1-T0-S0)) msg-len 6 sent 0 left 6 N201 260 length 6 first byte 0c
|
392
|
DLLAPD INFO <0016> lapd_core.c:1897 ((0:1-T0-S0)) send I frame V(S)=4
|
393
|
DLLAPD INFO <0016> lapd_core.c:232 ((0:1-T0-S0)) stop T203
|
394
|
DLLAPD INFO <0016> lapd_core.c:208 ((0:1-T0-S0)) start T200 (timeout=0.300000s)
|
395
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T0-S0)) TX: 02 01 08 08 0c 11 01 80 1e 29
|
396
|
DLLAPD INFO <0016> lapd_core.c:1888 ((0:1-T0-S0)) msg-len 6 sent 6 left 0 N201 260 length 0 first byte 0c
|
397
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 4, sapi(0) tei(0)
|
398
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: 02 01 01 0a
|
399
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:1-T0-S0)) RR received in state LAPD_STATE_MF_EST
|
400
|
DLLAPD INFO <0016> lapd_core.c:765 ((0:1-T0-S0)) ack frame 4
|
401
|
DLLAPD INFO <0016> lapd_core.c:224 ((0:1-T0-S0)) stop T200
|
402
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T0-S0)) start T203
|
403
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T0-S0)) lapd_send_i() called from line 1373
|
404
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 14, sapi(0) tei(0)
|
405
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: 00 01 08 0a 10 1c 1a 02 62 11 1c 11 01 80
|
406
|
DLLAPD INFO <0016> lapd_core.c:1520 ((0:1-T0-S0)) I received in state LAPD_STATE_MF_EST on SAPI(0)
|
407
|
DLLAPD INFO <0016> lapd_core.c:1606 ((0:1-T0-S0)) incrementing V(R) to 5
|
408
|
DLLAPD INFO <0016> lapd_core.c:232 ((0:1-T0-S0)) stop T203
|
409
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T0-S0)) start T203
|
410
|
DLLAPD INFO <0016> lapd_core.c:1615 ((0:1-T0-S0)) message in single I frame
|
411
|
DLMI DEBUG <0019> e1_input.c:752 E1TS(0:1) RX: 10 1c 1a 02 62 11 1c 11 01 80 sapi=0 tei=0
|
412
|
DLMI ERROR <0019> e1_config.c:133 (bts=0,trx=0) discarding RSL message received in locked administrative state
|
413
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T0-S0)) lapd_send_i() called from line 1672
|
414
|
DLLAPD INFO <0016> lapd_core.c:1681 ((0:1-T0-S0)) we are not busy and have no pending data, send RR
|
415
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T0-S0)) TX: 00 01 01 0a
|
416
|
DLMI ERROR <0019> input/dahdi.c:262 E1TS(0:1) TX: 0c 11 01 80 1e 03 27 17 49 06 1b 00 00 09 f1 07 00 01 c9 03 05 27 4e 00 e5 04 00 29 2b 2b 2b
|
417
|
DLLAPD INFO <0016> lapd_core.c:2233 ((0:1-T0-S0)) Message DL-DATA-REQUEST received in state LAPD_STATE_MF_EST
|
418
|
DLLAPD INFO <0016> lapd_core.c:1816 ((0:1-T0-S0)) writing message to send-queue: l3len: 31
|
419
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T0-S0)) lapd_send_i() called from line 1822
|
420
|
DLLAPD INFO <0016> lapd_core.c:1877 ((0:1-T0-S0)) get message from send-queue
|
421
|
DLLAPD INFO <0016> lapd_core.c:1888 ((0:1-T0-S0)) msg-len 31 sent 0 left 31 N201 260 length 31 first byte 0c
|
422
|
DLLAPD INFO <0016> lapd_core.c:1897 ((0:1-T0-S0)) send I frame V(S)=5
|
423
|
DLLAPD INFO <0016> lapd_core.c:232 ((0:1-T0-S0)) stop T203
|
424
|
DLLAPD INFO <0016> lapd_core.c:208 ((0:1-T0-S0)) start T200 (timeout=0.300000s)
|
425
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T0-S0)) TX: 02 01 0a 0a 0c 11 01 80 1e 03 27 17 49 06 1b 00 00 09 f1 07 00 01 c9 03 05 27 4e 00 e5 04 00 29 2b 2b 2b
|
426
|
DLLAPD INFO <0016> lapd_core.c:1888 ((0:1-T0-S0)) msg-len 31 sent 31 left 0 N201 260 length 0 first byte 0c
|
427
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 4, sapi(0) tei(0)
|
428
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: 02 01 01 0c
|
429
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:1-T0-S0)) RR received in state LAPD_STATE_MF_EST
|
430
|
DLLAPD INFO <0016> lapd_core.c:765 ((0:1-T0-S0)) ack frame 5
|
431
|
DLLAPD INFO <0016> lapd_core.c:224 ((0:1-T0-S0)) stop T200
|
432
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T0-S0)) start T203
|
433
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T0-S0)) lapd_send_i() called from line 1373
|
434
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 14, sapi(0) tei(0)
|
435
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: 00 01 0a 0c 10 1c 1a 02 62 11 1c 11 01 80
|
436
|
DLLAPD INFO <0016> lapd_core.c:1520 ((0:1-T0-S0)) I received in state LAPD_STATE_MF_EST on SAPI(0)
|
437
|
DLLAPD INFO <0016> lapd_core.c:1606 ((0:1-T0-S0)) incrementing V(R) to 6
|
438
|
DLLAPD INFO <0016> lapd_core.c:232 ((0:1-T0-S0)) stop T203
|
439
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T0-S0)) start T203
|
440
|
DLLAPD INFO <0016> lapd_core.c:1615 ((0:1-T0-S0)) message in single I frame
|
441
|
DLMI DEBUG <0019> e1_input.c:752 E1TS(0:1) RX: 10 1c 1a 02 62 11 1c 11 01 80 sapi=0 tei=0
|
442
|
DLMI ERROR <0019> e1_config.c:133 (bts=0,trx=0) discarding RSL message received in locked administrative state
|
443
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T0-S0)) lapd_send_i() called from line 1672
|
444
|
DLLAPD INFO <0016> lapd_core.c:1681 ((0:1-T0-S0)) we are not busy and have no pending data, send RR
|
445
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T0-S0)) TX: 00 01 01 0c
|
446
|
DLLAPD INFO <0016> lapd_core.c:594 ((0:1-T62-S62)) Timeout T200 state=LAPD_STATE_SABM_SENT
|
447
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T62-S62)) TX: fa 7d 7f
|
448
|
DLLAPD INFO <0016> lapd_core.c:208 ((0:1-T62-S62)) start T200 (timeout=0.300000s)
|
449
|
DLLAPD INFO <0016> lapd_core.c:594 ((0:1-T0-S62)) Timeout T200 state=LAPD_STATE_SABM_SENT
|
450
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T0-S62)) TX: fa 01 7f
|
451
|
DLLAPD INFO <0016> lapd_core.c:208 ((0:1-T0-S62)) start T200 (timeout=0.300000s)
|
452
|
DLLAPD INFO <0016> lapd_core.c:594 ((0:4-T1-S62)) Timeout T200 state=LAPD_STATE_SABM_SENT
|
453
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:4-T1-S62)) TX: fa 03 7f
|
454
|
DLLAPD INFO <0016> lapd_core.c:208 ((0:4-T1-S62)) start T200 (timeout=0.300000s)
|
455
|
DLLAPD INFO <0016> lapd_core.c:594 ((0:4-T1-S0)) Timeout T200 state=LAPD_STATE_SABM_SENT
|
456
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:4-T1-S0)) TX: 02 03 7f
|
457
|
DLLAPD INFO <0016> lapd_core.c:208 ((0:4-T1-S0)) start T200 (timeout=0.300000s)
|
458
|
DLLAPD INFO <0016> lapd_core.c:594 ((0:7-T2-S62)) Timeout T200 state=LAPD_STATE_SABM_SENT
|
459
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:7-T2-S62)) TX: fa 05 7f
|
460
|
DLLAPD INFO <0016> lapd_core.c:208 ((0:7-T2-S62)) start T200 (timeout=0.300000s)
|
461
|
DLLAPD INFO <0016> lapd_core.c:594 ((0:7-T2-S0)) Timeout T200 state=LAPD_STATE_SABM_SENT
|
462
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:7-T2-S0)) TX: 02 05 7f
|
463
|
DLLAPD INFO <0016> lapd_core.c:208 ((0:7-T2-S0)) start T200 (timeout=0.300000s)
|
464
|
DLLAPD INFO <0016> lapd_core.c:594 ((0:10-T3-S62)) Timeout T200 state=LAPD_STATE_SABM_SENT
|
465
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:10-T3-S62)) TX: fa 07 7f
|
466
|
DLLAPD INFO <0016> lapd_core.c:208 ((0:10-T3-S62)) start T200 (timeout=0.300000s)
|
467
|
DLLAPD INFO <0016> lapd_core.c:594 ((0:10-T3-S0)) Timeout T200 state=LAPD_STATE_SABM_SENT
|
468
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:10-T3-S0)) TX: 02 07 7f
|
469
|
DLLAPD INFO <0016> lapd_core.c:208 ((0:10-T3-S0)) start T200 (timeout=0.300000s)
|
470
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:4) <= len = 3, sapi(62) tei(1)
|
471
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:4: RX: fa 03 73
|
472
|
DLLAPD INFO <0016> lapd_core.c:1170 ((0:4-T1-S62)) UA received in state LAPD_STATE_SABM_SENT
|
473
|
DLLAPD INFO <0016> lapd_core.c:1224 ((0:4-T1-S62)) UA in SABM state
|
474
|
DLLAPD INFO <0016> lapd_core.c:224 ((0:4-T1-S62)) stop T200
|
475
|
DLLAPD INFO <0016> lapd_core.c:239 ((0:4-T1-S62)) new state LAPD_STATE_SABM_SENT -> LAPD_STATE_MF_EST
|
476
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:4-T1-S62)) start T203
|
477
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:4-T1-S62)) lapd_send_i() called from line 1250
|
478
|
DLLAPD NOTICE <0016> input/lapd.c:659 ((0:4-T1-S62)) LAPD DL-ESTABLISH confirm TEI=1 SAPI=62
|
479
|
DLMI DEBUG <0019> e1_input.c:739 E1TS(0:4) DL_EST: sapi(62) tei(1)
|
480
|
DNM DEBUG <0004> bts_ericsson_rbs2000.c:126 inp_sig_cb(): Input signal 'TEI-UP' received
|
481
|
DNM NOTICE <0004> bts_ericsson_rbs2000.c:55 bootstrapping OML for TRX 0/1
|
482
|
DLMI DEBUG <0019> osmo_bsc_main.c:386 inp_sig_cb(): Input signal 'TEI-UP' received
|
483
|
DNM NOTICE <0004> abis_nm.c:1808 Getting attributes from BTS0 type rbs2000 is not supported.
|
484
|
DNM NOTICE <0004> abis_nm.c:1808 Getting attributes from BTS0 type rbs2000 is not supported.
|
485
|
DNM NOTICE <0004> abis_nm.c:1808 Getting attributes from BTS0 type rbs2000 is not supported.
|
486
|
DNM NOTICE <0004> abis_nm.c:1808 Getting attributes from BTS0 type rbs2000 is not supported.
|
487
|
DNM NOTICE <0004> abis_nm.c:1808 Getting attributes from BTS0 type rbs2000 is not supported.
|
488
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:7) <= len = 3, sapi(62) tei(2)
|
489
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:7: RX: fa 05 73
|
490
|
DLLAPD INFO <0016> lapd_core.c:1170 ((0:7-T2-S62)) UA received in state LAPD_STATE_SABM_SENT
|
491
|
DLLAPD INFO <0016> lapd_core.c:1224 ((0:7-T2-S62)) UA in SABM state
|
492
|
DLLAPD INFO <0016> lapd_core.c:224 ((0:7-T2-S62)) stop T200
|
493
|
DLLAPD INFO <0016> lapd_core.c:239 ((0:7-T2-S62)) new state LAPD_STATE_SABM_SENT -> LAPD_STATE_MF_EST
|
494
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:7-T2-S62)) start T203
|
495
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:7-T2-S62)) lapd_send_i() called from line 1250
|
496
|
DLLAPD NOTICE <0016> input/lapd.c:659 ((0:7-T2-S62)) LAPD DL-ESTABLISH confirm TEI=2 SAPI=62
|
497
|
DLMI DEBUG <0019> e1_input.c:739 E1TS(0:7) DL_EST: sapi(62) tei(2)
|
498
|
DNM DEBUG <0004> bts_ericsson_rbs2000.c:126 inp_sig_cb(): Input signal 'TEI-UP' received
|
499
|
DNM NOTICE <0004> bts_ericsson_rbs2000.c:55 bootstrapping OML for TRX 0/2
|
500
|
DLMI DEBUG <0019> osmo_bsc_main.c:386 inp_sig_cb(): Input signal 'TEI-UP' received
|
501
|
DNM NOTICE <0004> abis_nm.c:1808 Getting attributes from BTS0 type rbs2000 is not supported.
|
502
|
DNM NOTICE <0004> abis_nm.c:1808 Getting attributes from BTS0 type rbs2000 is not supported.
|
503
|
DNM NOTICE <0004> abis_nm.c:1808 Getting attributes from BTS0 type rbs2000 is not supported.
|
504
|
DNM NOTICE <0004> abis_nm.c:1808 Getting attributes from BTS0 type rbs2000 is not supported.
|
505
|
DNM NOTICE <0004> abis_nm.c:1808 Getting attributes from BTS0 type rbs2000 is not supported.
|
506
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:10) <= len = 3, sapi(62) tei(3)
|
507
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:10: RX: fa 07 73
|
508
|
DLLAPD INFO <0016> lapd_core.c:1170 ((0:10-T3-S62)) UA received in state LAPD_STATE_SABM_SENT
|
509
|
DLLAPD INFO <0016> lapd_core.c:1224 ((0:10-T3-S62)) UA in SABM state
|
510
|
DLLAPD INFO <0016> lapd_core.c:224 ((0:10-T3-S62)) stop T200
|
511
|
DLLAPD INFO <0016> lapd_core.c:239 ((0:10-T3-S62)) new state LAPD_STATE_SABM_SENT -> LAPD_STATE_MF_EST
|
512
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:10-T3-S62)) start T203
|
513
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:10-T3-S62)) lapd_send_i() called from line 1250
|
514
|
DLLAPD NOTICE <0016> input/lapd.c:659 ((0:10-T3-S62)) LAPD DL-ESTABLISH confirm TEI=3 SAPI=62
|
515
|
DLMI DEBUG <0019> e1_input.c:739 E1TS(0:10) DL_EST: sapi(62) tei(3)
|
516
|
DNM DEBUG <0004> bts_ericsson_rbs2000.c:126 inp_sig_cb(): Input signal 'TEI-UP' received
|
517
|
DNM NOTICE <0004> bts_ericsson_rbs2000.c:55 bootstrapping OML for TRX 0/3
|
518
|
DLMI DEBUG <0019> osmo_bsc_main.c:386 inp_sig_cb(): Input signal 'TEI-UP' received
|
519
|
DNM NOTICE <0004> abis_nm.c:1808 Getting attributes from BTS0 type rbs2000 is not supported.
|
520
|
DNM NOTICE <0004> abis_nm.c:1808 Getting attributes from BTS0 type rbs2000 is not supported.
|
521
|
DNM NOTICE <0004> abis_nm.c:1808 Getting attributes from BTS0 type rbs2000 is not supported.
|
522
|
DNM NOTICE <0004> abis_nm.c:1808 Getting attributes from BTS0 type rbs2000 is not supported.
|
523
|
DNM NOTICE <0004> abis_nm.c:1808 Getting attributes from BTS0 type rbs2000 is not supported.
|
524
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 3, sapi(62) tei(0)
|
525
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: fa 01 73
|
526
|
DLLAPD INFO <0016> lapd_core.c:1170 ((0:1-T0-S62)) UA received in state LAPD_STATE_SABM_SENT
|
527
|
DLLAPD INFO <0016> lapd_core.c:1224 ((0:1-T0-S62)) UA in SABM state
|
528
|
DLLAPD INFO <0016> lapd_core.c:224 ((0:1-T0-S62)) stop T200
|
529
|
DLLAPD INFO <0016> lapd_core.c:239 ((0:1-T0-S62)) new state LAPD_STATE_SABM_SENT -> LAPD_STATE_MF_EST
|
530
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T0-S62)) start T203
|
531
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T0-S62)) lapd_send_i() called from line 1250
|
532
|
DLLAPD NOTICE <0016> input/lapd.c:659 ((0:1-T0-S62)) LAPD DL-ESTABLISH confirm TEI=0 SAPI=62
|
533
|
DLMI DEBUG <0019> e1_input.c:739 E1TS(0:1) DL_EST: sapi(62) tei(0)
|
534
|
DNM DEBUG <0004> bts_ericsson_rbs2000.c:126 inp_sig_cb(): Input signal 'TEI-UP' received
|
535
|
DNM NOTICE <0004> bts_ericsson_rbs2000.c:55 bootstrapping OML for TRX 0/0
|
536
|
DLMI DEBUG <0019> osmo_bsc_main.c:386 inp_sig_cb(): Input signal 'TEI-UP' received
|
537
|
DNM NOTICE <0004> abis_nm.c:1808 Getting attributes from BTS0 type rbs2000 is not supported.
|
538
|
DNM NOTICE <0004> abis_nm.c:1808 Getting attributes from BTS0 type rbs2000 is not supported.
|
539
|
DNM NOTICE <0004> abis_nm.c:1808 Getting attributes from BTS0 type rbs2000 is not supported.
|
540
|
DNM NOTICE <0004> abis_nm.c:1808 Getting attributes from BTS0 type rbs2000 is not supported.
|
541
|
DNM NOTICE <0004> abis_nm.c:1808 Getting attributes from BTS0 type rbs2000 is not supported.
|
542
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:4) <= len = 3, sapi(0) tei(1)
|
543
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:4: RX: 02 03 73
|
544
|
DLLAPD INFO <0016> lapd_core.c:1170 ((0:4-T1-S0)) UA received in state LAPD_STATE_SABM_SENT
|
545
|
DLLAPD INFO <0016> lapd_core.c:1224 ((0:4-T1-S0)) UA in SABM state
|
546
|
DLLAPD INFO <0016> lapd_core.c:224 ((0:4-T1-S0)) stop T200
|
547
|
DLLAPD INFO <0016> lapd_core.c:239 ((0:4-T1-S0)) new state LAPD_STATE_SABM_SENT -> LAPD_STATE_MF_EST
|
548
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:4-T1-S0)) start T203
|
549
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:4-T1-S0)) lapd_send_i() called from line 1250
|
550
|
DLLAPD NOTICE <0016> input/lapd.c:659 ((0:4-T1-S0)) LAPD DL-ESTABLISH confirm TEI=1 SAPI=0
|
551
|
DLMI DEBUG <0019> e1_input.c:739 E1TS(0:4) DL_EST: sapi(0) tei(1)
|
552
|
DNM DEBUG <0004> bts_ericsson_rbs2000.c:126 inp_sig_cb(): Input signal 'TEI-UP' received
|
553
|
DLMI DEBUG <0019> osmo_bsc_main.c:386 inp_sig_cb(): Input signal 'TEI-UP' received
|
554
|
DRSL NOTICE <0003> osmo_bsc_main.c:318 (bts=0,trx=1) bootstrapping RSL on ARFCN 121 using MCC-MNC 901-70 LAC=1 CID=0 BSIC=63
|
555
|
DRR DEBUG <0002> bts_trx.c:332 SI5: 06 1d 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 2b 2b 2b 2b 2b
|
556
|
DRR DEBUG <0002> bts_trx.c:334 SI5bis: OFF
|
557
|
DRR DEBUG <0002> bts_trx.c:334 SI5ter: OFF
|
558
|
DRR DEBUG <0002> bts_trx.c:332 SI6: 06 1e 00 00 09 f1 07 00 01 27 ff 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b
|
559
|
DTS DEBUG <0010> osmo_bsc_main.c:347 timeslot(0-1-0-NONE)[0x556b666639f0]{NOT_INITIALIZED}: Received Event TS_EV_RSL_READY
|
560
|
DTS DEBUG <0010> timeslot_fsm.c:242 timeslot(0-1-0-NONE)[0x556b666639f0]{NOT_INITIALIZED}: (pchan_is=NONE) OML not ready yet
|
561
|
DTS DEBUG <0010> osmo_bsc_main.c:347 timeslot(0-1-1-NONE)[0x556b66663ef0]{NOT_INITIALIZED}: Received Event TS_EV_RSL_READY
|
562
|
DTS DEBUG <0010> timeslot_fsm.c:242 timeslot(0-1-1-NONE)[0x556b66663ef0]{NOT_INITIALIZED}: (pchan_is=NONE) OML not ready yet
|
563
|
DTS DEBUG <0010> osmo_bsc_main.c:347 timeslot(0-1-2-NONE)[0x556b666646f0]{NOT_INITIALIZED}: Received Event TS_EV_RSL_READY
|
564
|
DTS DEBUG <0010> timeslot_fsm.c:242 timeslot(0-1-2-NONE)[0x556b666646f0]{NOT_INITIALIZED}: (pchan_is=NONE) OML not ready yet
|
565
|
DTS DEBUG <0010> osmo_bsc_main.c:347 timeslot(0-1-3-NONE)[0x556b66664ef0]{NOT_INITIALIZED}: Received Event TS_EV_RSL_READY
|
566
|
DTS DEBUG <0010> timeslot_fsm.c:242 timeslot(0-1-3-NONE)[0x556b66664ef0]{NOT_INITIALIZED}: (pchan_is=NONE) OML not ready yet
|
567
|
DTS DEBUG <0010> osmo_bsc_main.c:347 timeslot(0-1-4-NONE)[0x556b666656f0]{NOT_INITIALIZED}: Received Event TS_EV_RSL_READY
|
568
|
DTS DEBUG <0010> timeslot_fsm.c:242 timeslot(0-1-4-NONE)[0x556b666656f0]{NOT_INITIALIZED}: (pchan_is=NONE) OML not ready yet
|
569
|
DTS DEBUG <0010> osmo_bsc_main.c:347 timeslot(0-1-5-NONE)[0x556b66665ef0]{NOT_INITIALIZED}: Received Event TS_EV_RSL_READY
|
570
|
DTS DEBUG <0010> timeslot_fsm.c:242 timeslot(0-1-5-NONE)[0x556b66665ef0]{NOT_INITIALIZED}: (pchan_is=NONE) OML not ready yet
|
571
|
DTS DEBUG <0010> osmo_bsc_main.c:347 timeslot(0-1-6-NONE)[0x556b666666f0]{NOT_INITIALIZED}: Received Event TS_EV_RSL_READY
|
572
|
DTS DEBUG <0010> timeslot_fsm.c:242 timeslot(0-1-6-NONE)[0x556b666666f0]{NOT_INITIALIZED}: (pchan_is=NONE) OML not ready yet
|
573
|
DTS DEBUG <0010> osmo_bsc_main.c:347 timeslot(0-1-7-NONE)[0x556b66666f80]{NOT_INITIALIZED}: Received Event TS_EV_RSL_READY
|
574
|
DTS DEBUG <0010> timeslot_fsm.c:242 timeslot(0-1-7-NONE)[0x556b66666f80]{NOT_INITIALIZED}: (pchan_is=NONE) OML not ready yet
|
575
|
DLMI ERROR <0019> input/dahdi.c:262 E1TS(0:4) TX: 10 1a 1e 05 0b 00 12 06 1d 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
|
576
|
DLLAPD INFO <0016> lapd_core.c:2233 ((0:4-T1-S0)) Message DL-DATA-REQUEST received in state LAPD_STATE_MF_EST
|
577
|
DLLAPD INFO <0016> lapd_core.c:1816 ((0:4-T1-S0)) writing message to send-queue: l3len: 25
|
578
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:4-T1-S0)) lapd_send_i() called from line 1822
|
579
|
DLLAPD INFO <0016> lapd_core.c:1877 ((0:4-T1-S0)) get message from send-queue
|
580
|
DLLAPD INFO <0016> lapd_core.c:1888 ((0:4-T1-S0)) msg-len 25 sent 0 left 25 N201 260 length 25 first byte 10
|
581
|
DLLAPD INFO <0016> lapd_core.c:1897 ((0:4-T1-S0)) send I frame V(S)=0
|
582
|
DLLAPD INFO <0016> lapd_core.c:232 ((0:4-T1-S0)) stop T203
|
583
|
DLLAPD INFO <0016> lapd_core.c:208 ((0:4-T1-S0)) start T200 (timeout=0.300000s)
|
584
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:4-T1-S0)) TX: 02 03 00 00 10 1a 1e 05 0b 00 12 06 1d 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
|
585
|
DLLAPD INFO <0016> lapd_core.c:1888 ((0:4-T1-S0)) msg-len 25 sent 25 left 0 N201 260 length 0 first byte 10
|
586
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:7) <= len = 3, sapi(0) tei(2)
|
587
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:7: RX: 02 05 73
|
588
|
DLLAPD INFO <0016> lapd_core.c:1170 ((0:7-T2-S0)) UA received in state LAPD_STATE_SABM_SENT
|
589
|
DLLAPD INFO <0016> lapd_core.c:1224 ((0:7-T2-S0)) UA in SABM state
|
590
|
DLLAPD INFO <0016> lapd_core.c:224 ((0:7-T2-S0)) stop T200
|
591
|
DLLAPD INFO <0016> lapd_core.c:239 ((0:7-T2-S0)) new state LAPD_STATE_SABM_SENT -> LAPD_STATE_MF_EST
|
592
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:7-T2-S0)) start T203
|
593
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:7-T2-S0)) lapd_send_i() called from line 1250
|
594
|
DLLAPD NOTICE <0016> input/lapd.c:659 ((0:7-T2-S0)) LAPD DL-ESTABLISH confirm TEI=2 SAPI=0
|
595
|
DLMI DEBUG <0019> e1_input.c:739 E1TS(0:7) DL_EST: sapi(0) tei(2)
|
596
|
DNM DEBUG <0004> bts_ericsson_rbs2000.c:126 inp_sig_cb(): Input signal 'TEI-UP' received
|
597
|
DLMI DEBUG <0019> osmo_bsc_main.c:386 inp_sig_cb(): Input signal 'TEI-UP' received
|
598
|
DRSL NOTICE <0003> osmo_bsc_main.c:318 (bts=0,trx=2) bootstrapping RSL on ARFCN 119 using MCC-MNC 901-70 LAC=1 CID=0 BSIC=63
|
599
|
DRR DEBUG <0002> bts_trx.c:332 SI5: 06 1d 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 2b 2b 2b 2b 2b
|
600
|
DRR DEBUG <0002> bts_trx.c:334 SI5bis: OFF
|
601
|
DRR DEBUG <0002> bts_trx.c:334 SI5ter: OFF
|
602
|
DRR DEBUG <0002> bts_trx.c:332 SI6: 06 1e 00 00 09 f1 07 00 01 27 ff 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b
|
603
|
DTS DEBUG <0010> osmo_bsc_main.c:347 timeslot(0-2-0-NONE)[0x556b66668290]{NOT_INITIALIZED}: Received Event TS_EV_RSL_READY
|
604
|
DTS DEBUG <0010> timeslot_fsm.c:242 timeslot(0-2-0-NONE)[0x556b66668290]{NOT_INITIALIZED}: (pchan_is=NONE) OML not ready yet
|
605
|
DTS DEBUG <0010> osmo_bsc_main.c:347 timeslot(0-2-1-NONE)[0x556b66668810]{NOT_INITIALIZED}: Received Event TS_EV_RSL_READY
|
606
|
DTS DEBUG <0010> timeslot_fsm.c:242 timeslot(0-2-1-NONE)[0x556b66668810]{NOT_INITIALIZED}: (pchan_is=NONE) OML not ready yet
|
607
|
DTS DEBUG <0010> osmo_bsc_main.c:347 timeslot(0-2-2-NONE)[0x556b66669010]{NOT_INITIALIZED}: Received Event TS_EV_RSL_READY
|
608
|
DTS DEBUG <0010> timeslot_fsm.c:242 timeslot(0-2-2-NONE)[0x556b66669010]{NOT_INITIALIZED}: (pchan_is=NONE) OML not ready yet
|
609
|
DTS DEBUG <0010> osmo_bsc_main.c:347 timeslot(0-2-3-NONE)[0x556b66669810]{NOT_INITIALIZED}: Received Event TS_EV_RSL_READY
|
610
|
DTS DEBUG <0010> timeslot_fsm.c:242 timeslot(0-2-3-NONE)[0x556b66669810]{NOT_INITIALIZED}: (pchan_is=NONE) OML not ready yet
|
611
|
DTS DEBUG <0010> osmo_bsc_main.c:347 timeslot(0-2-4-NONE)[0x556b6666a010]{NOT_INITIALIZED}: Received Event TS_EV_RSL_READY
|
612
|
DTS DEBUG <0010> timeslot_fsm.c:242 timeslot(0-2-4-NONE)[0x556b6666a010]{NOT_INITIALIZED}: (pchan_is=NONE) OML not ready yet
|
613
|
DTS DEBUG <0010> osmo_bsc_main.c:347 timeslot(0-2-5-NONE)[0x556b6666a810]{NOT_INITIALIZED}: Received Event TS_EV_RSL_READY
|
614
|
DTS DEBUG <0010> timeslot_fsm.c:242 timeslot(0-2-5-NONE)[0x556b6666a810]{NOT_INITIALIZED}: (pchan_is=NONE) OML not ready yet
|
615
|
DTS DEBUG <0010> osmo_bsc_main.c:347 timeslot(0-2-6-NONE)[0x556b6666b010]{NOT_INITIALIZED}: Received Event TS_EV_RSL_READY
|
616
|
DTS DEBUG <0010> timeslot_fsm.c:242 timeslot(0-2-6-NONE)[0x556b6666b010]{NOT_INITIALIZED}: (pchan_is=NONE) OML not ready yet
|
617
|
DTS DEBUG <0010> osmo_bsc_main.c:347 timeslot(0-2-7-NONE)[0x556b6666b8a0]{NOT_INITIALIZED}: Received Event TS_EV_RSL_READY
|
618
|
DTS DEBUG <0010> timeslot_fsm.c:242 timeslot(0-2-7-NONE)[0x556b6666b8a0]{NOT_INITIALIZED}: (pchan_is=NONE) OML not ready yet
|
619
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:10) <= len = 3, sapi(0) tei(3)
|
620
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:10: RX: 02 07 73
|
621
|
DLLAPD INFO <0016> lapd_core.c:1170 ((0:10-T3-S0)) UA received in state LAPD_STATE_SABM_SENT
|
622
|
DLLAPD INFO <0016> lapd_core.c:1224 ((0:10-T3-S0)) UA in SABM state
|
623
|
DLLAPD INFO <0016> lapd_core.c:224 ((0:10-T3-S0)) stop T200
|
624
|
DLLAPD INFO <0016> lapd_core.c:239 ((0:10-T3-S0)) new state LAPD_STATE_SABM_SENT -> LAPD_STATE_MF_EST
|
625
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:10-T3-S0)) start T203
|
626
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:10-T3-S0)) lapd_send_i() called from line 1250
|
627
|
DLLAPD NOTICE <0016> input/lapd.c:659 ((0:10-T3-S0)) LAPD DL-ESTABLISH confirm TEI=3 SAPI=0
|
628
|
DLMI DEBUG <0019> e1_input.c:739 E1TS(0:10) DL_EST: sapi(0) tei(3)
|
629
|
DNM DEBUG <0004> bts_ericsson_rbs2000.c:126 inp_sig_cb(): Input signal 'TEI-UP' received
|
630
|
DLMI DEBUG <0019> osmo_bsc_main.c:386 inp_sig_cb(): Input signal 'TEI-UP' received
|
631
|
DRSL NOTICE <0003> osmo_bsc_main.c:318 (bts=0,trx=3) bootstrapping RSL on ARFCN 119 using MCC-MNC 901-70 LAC=1 CID=0 BSIC=63
|
632
|
DRR DEBUG <0002> bts_trx.c:332 SI5: 06 1d 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 2b 2b 2b 2b 2b
|
633
|
DRR DEBUG <0002> bts_trx.c:334 SI5bis: OFF
|
634
|
DRR DEBUG <0002> bts_trx.c:334 SI5ter: OFF
|
635
|
DRR DEBUG <0002> bts_trx.c:332 SI6: 06 1e 00 00 09 f1 07 00 01 27 ff 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b
|
636
|
DTS DEBUG <0010> osmo_bsc_main.c:347 timeslot(0-3-0-NONE)[0x556b6666cc50]{NOT_INITIALIZED}: Received Event TS_EV_RSL_READY
|
637
|
DTS DEBUG <0010> timeslot_fsm.c:242 timeslot(0-3-0-NONE)[0x556b6666cc50]{NOT_INITIALIZED}: (pchan_is=NONE) OML not ready yet
|
638
|
DTS DEBUG <0010> osmo_bsc_main.c:347 timeslot(0-3-1-NONE)[0x556b6666d150]{NOT_INITIALIZED}: Received Event TS_EV_RSL_READY
|
639
|
DTS DEBUG <0010> timeslot_fsm.c:242 timeslot(0-3-1-NONE)[0x556b6666d150]{NOT_INITIALIZED}: (pchan_is=NONE) OML not ready yet
|
640
|
DTS DEBUG <0010> osmo_bsc_main.c:347 timeslot(0-3-2-NONE)[0x556b6666d950]{NOT_INITIALIZED}: Received Event TS_EV_RSL_READY
|
641
|
DTS DEBUG <0010> timeslot_fsm.c:242 timeslot(0-3-2-NONE)[0x556b6666d950]{NOT_INITIALIZED}: (pchan_is=NONE) OML not ready yet
|
642
|
DTS DEBUG <0010> osmo_bsc_main.c:347 timeslot(0-3-3-NONE)[0x556b6666e150]{NOT_INITIALIZED}: Received Event TS_EV_RSL_READY
|
643
|
DTS DEBUG <0010> timeslot_fsm.c:242 timeslot(0-3-3-NONE)[0x556b6666e150]{NOT_INITIALIZED}: (pchan_is=NONE) OML not ready yet
|
644
|
DTS DEBUG <0010> osmo_bsc_main.c:347 timeslot(0-3-4-NONE)[0x556b6666e950]{NOT_INITIALIZED}: Received Event TS_EV_RSL_READY
|
645
|
DTS DEBUG <0010> timeslot_fsm.c:242 timeslot(0-3-4-NONE)[0x556b6666e950]{NOT_INITIALIZED}: (pchan_is=NONE) OML not ready yet
|
646
|
DTS DEBUG <0010> osmo_bsc_main.c:347 timeslot(0-3-5-NONE)[0x556b6666f150]{NOT_INITIALIZED}: Received Event TS_EV_RSL_READY
|
647
|
DTS DEBUG <0010> timeslot_fsm.c:242 timeslot(0-3-5-NONE)[0x556b6666f150]{NOT_INITIALIZED}: (pchan_is=NONE) OML not ready yet
|
648
|
DTS DEBUG <0010> osmo_bsc_main.c:347 timeslot(0-3-6-NONE)[0x556b6666f950]{NOT_INITIALIZED}: Received Event TS_EV_RSL_READY
|
649
|
DTS DEBUG <0010> timeslot_fsm.c:242 timeslot(0-3-6-NONE)[0x556b6666f950]{NOT_INITIALIZED}: (pchan_is=NONE) OML not ready yet
|
650
|
DTS DEBUG <0010> osmo_bsc_main.c:347 timeslot(0-3-7-NONE)[0x556b666701e0]{NOT_INITIALIZED}: Received Event TS_EV_RSL_READY
|
651
|
DTS DEBUG <0010> timeslot_fsm.c:242 timeslot(0-3-7-NONE)[0x556b666701e0]{NOT_INITIALIZED}: (pchan_is=NONE) OML not ready yet
|
652
|
DLMI ERROR <0019> input/dahdi.c:262 E1TS(0:7) TX: 10 1a 1e 05 0b 00 12 06 1d 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
|
653
|
DLLAPD INFO <0016> lapd_core.c:2233 ((0:7-T2-S0)) Message DL-DATA-REQUEST received in state LAPD_STATE_MF_EST
|
654
|
DLLAPD INFO <0016> lapd_core.c:1816 ((0:7-T2-S0)) writing message to send-queue: l3len: 25
|
655
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:7-T2-S0)) lapd_send_i() called from line 1822
|
656
|
DLLAPD INFO <0016> lapd_core.c:1877 ((0:7-T2-S0)) get message from send-queue
|
657
|
DLLAPD INFO <0016> lapd_core.c:1888 ((0:7-T2-S0)) msg-len 25 sent 0 left 25 N201 260 length 25 first byte 10
|
658
|
DLLAPD INFO <0016> lapd_core.c:1897 ((0:7-T2-S0)) send I frame V(S)=0
|
659
|
DLLAPD INFO <0016> lapd_core.c:232 ((0:7-T2-S0)) stop T203
|
660
|
DLLAPD INFO <0016> lapd_core.c:208 ((0:7-T2-S0)) start T200 (timeout=0.300000s)
|
661
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:7-T2-S0)) TX: 02 05 00 00 10 1a 1e 05 0b 00 12 06 1d 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
|
662
|
DLLAPD INFO <0016> lapd_core.c:1888 ((0:7-T2-S0)) msg-len 25 sent 25 left 0 N201 260 length 0 first byte 10
|
663
|
DLMI ERROR <0019> input/dahdi.c:262 E1TS(0:10) TX: 10 1a 1e 05 0b 00 12 06 1d 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
|
664
|
DLLAPD INFO <0016> lapd_core.c:2233 ((0:10-T3-S0)) Message DL-DATA-REQUEST received in state LAPD_STATE_MF_EST
|
665
|
DLLAPD INFO <0016> lapd_core.c:1816 ((0:10-T3-S0)) writing message to send-queue: l3len: 25
|
666
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:10-T3-S0)) lapd_send_i() called from line 1822
|
667
|
DLLAPD INFO <0016> lapd_core.c:1877 ((0:10-T3-S0)) get message from send-queue
|
668
|
DLLAPD INFO <0016> lapd_core.c:1888 ((0:10-T3-S0)) msg-len 25 sent 0 left 25 N201 260 length 25 first byte 10
|
669
|
DLLAPD INFO <0016> lapd_core.c:1897 ((0:10-T3-S0)) send I frame V(S)=0
|
670
|
DLLAPD INFO <0016> lapd_core.c:232 ((0:10-T3-S0)) stop T203
|
671
|
DLLAPD INFO <0016> lapd_core.c:208 ((0:10-T3-S0)) start T200 (timeout=0.300000s)
|
672
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:10-T3-S0)) TX: 02 07 00 00 10 1a 1e 05 0b 00 12 06 1d 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
|
673
|
DLLAPD INFO <0016> lapd_core.c:1888 ((0:10-T3-S0)) msg-len 25 sent 25 left 0 N201 260 length 0 first byte 10
|
674
|
DLMI ERROR <0019> input/dahdi.c:262 E1TS(0:1) TX: 0c 11 01 80 1e 04 27 17 31 06 1c 09 f1 07 00 01 4e 00 e5 04 00 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b
|
675
|
DLLAPD INFO <0016> lapd_core.c:2233 ((0:1-T0-S0)) Message DL-DATA-REQUEST received in state LAPD_STATE_MF_EST
|
676
|
DLLAPD INFO <0016> lapd_core.c:1816 ((0:1-T0-S0)) writing message to send-queue: l3len: 31
|
677
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T0-S0)) lapd_send_i() called from line 1822
|
678
|
DLLAPD INFO <0016> lapd_core.c:1877 ((0:1-T0-S0)) get message from send-queue
|
679
|
DLLAPD INFO <0016> lapd_core.c:1888 ((0:1-T0-S0)) msg-len 31 sent 0 left 31 N201 260 length 31 first byte 0c
|
680
|
DLLAPD INFO <0016> lapd_core.c:1897 ((0:1-T0-S0)) send I frame V(S)=6
|
681
|
DLLAPD INFO <0016> lapd_core.c:232 ((0:1-T0-S0)) stop T203
|
682
|
DLLAPD INFO <0016> lapd_core.c:208 ((0:1-T0-S0)) start T200 (timeout=0.300000s)
|
683
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T0-S0)) TX: 02 01 0c 0c 0c 11 01 80 1e 04 27 17 31 06 1c 09 f1 07 00 01 4e 00 e5 04 00 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b
|
684
|
DLLAPD INFO <0016> lapd_core.c:1888 ((0:1-T0-S0)) msg-len 31 sent 31 left 0 N201 260 length 0 first byte 0c
|
685
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:4) <= len = 4, sapi(0) tei(1)
|
686
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:4: RX: 02 03 01 02
|
687
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:4-T1-S0)) RR received in state LAPD_STATE_MF_EST
|
688
|
DLLAPD INFO <0016> lapd_core.c:765 ((0:4-T1-S0)) ack frame 0
|
689
|
DLLAPD INFO <0016> lapd_core.c:224 ((0:4-T1-S0)) stop T200
|
690
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:4-T1-S0)) start T203
|
691
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:4-T1-S0)) lapd_send_i() called from line 1373
|
692
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:10) <= len = 4, sapi(0) tei(3)
|
693
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:10: RX: 02 07 01 02
|
694
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:10-T3-S0)) RR received in state LAPD_STATE_MF_EST
|
695
|
DLLAPD INFO <0016> lapd_core.c:765 ((0:10-T3-S0)) ack frame 0
|
696
|
DLLAPD INFO <0016> lapd_core.c:224 ((0:10-T3-S0)) stop T200
|
697
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:10-T3-S0)) start T203
|
698
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:10-T3-S0)) lapd_send_i() called from line 1373
|
699
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:7) <= len = 4, sapi(0) tei(2)
|
700
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:7: RX: 02 05 01 02
|
701
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:7-T2-S0)) RR received in state LAPD_STATE_MF_EST
|
702
|
DLLAPD INFO <0016> lapd_core.c:765 ((0:7-T2-S0)) ack frame 0
|
703
|
DLLAPD INFO <0016> lapd_core.c:224 ((0:7-T2-S0)) stop T200
|
704
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:7-T2-S0)) start T203
|
705
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:7-T2-S0)) lapd_send_i() called from line 1373
|
706
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 4, sapi(0) tei(0)
|
707
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: 02 01 01 0e
|
708
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:1-T0-S0)) RR received in state LAPD_STATE_MF_EST
|
709
|
DLLAPD INFO <0016> lapd_core.c:765 ((0:1-T0-S0)) ack frame 6
|
710
|
DLLAPD INFO <0016> lapd_core.c:224 ((0:1-T0-S0)) stop T200
|
711
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T0-S0)) start T203
|
712
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T0-S0)) lapd_send_i() called from line 1373
|
713
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 14, sapi(0) tei(0)
|
714
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: 00 01 0c 0e 10 1c 1a 02 62 11 1c 11 01 80
|
715
|
DLLAPD INFO <0016> lapd_core.c:1520 ((0:1-T0-S0)) I received in state LAPD_STATE_MF_EST on SAPI(0)
|
716
|
DLLAPD INFO <0016> lapd_core.c:1606 ((0:1-T0-S0)) incrementing V(R) to 7
|
717
|
DLLAPD INFO <0016> lapd_core.c:232 ((0:1-T0-S0)) stop T203
|
718
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T0-S0)) start T203
|
719
|
DLLAPD INFO <0016> lapd_core.c:1615 ((0:1-T0-S0)) message in single I frame
|
720
|
DLMI DEBUG <0019> e1_input.c:752 E1TS(0:1) RX: 10 1c 1a 02 62 11 1c 11 01 80 sapi=0 tei=0
|
721
|
DLMI ERROR <0019> e1_config.c:133 (bts=0,trx=0) discarding RSL message received in locked administrative state
|
722
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T0-S0)) lapd_send_i() called from line 1672
|
723
|
DLLAPD INFO <0016> lapd_core.c:1681 ((0:1-T0-S0)) we are not busy and have no pending data, send RR
|
724
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T0-S0)) TX: 00 01 01 0e
|
725
|
DLMI ERROR <0019> input/dahdi.c:262 E1TS(0:4) TX: 10 1a 1e 0d
|
726
|
DLLAPD INFO <0016> lapd_core.c:2233 ((0:4-T1-S0)) Message DL-DATA-REQUEST received in state LAPD_STATE_MF_EST
|
727
|
DLLAPD INFO <0016> lapd_core.c:1816 ((0:4-T1-S0)) writing message to send-queue: l3len: 4
|
728
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:4-T1-S0)) lapd_send_i() called from line 1822
|
729
|
DLLAPD INFO <0016> lapd_core.c:1877 ((0:4-T1-S0)) get message from send-queue
|
730
|
DLLAPD INFO <0016> lapd_core.c:1888 ((0:4-T1-S0)) msg-len 4 sent 0 left 4 N201 260 length 4 first byte 10
|
731
|
DLLAPD INFO <0016> lapd_core.c:1897 ((0:4-T1-S0)) send I frame V(S)=1
|
732
|
DLLAPD INFO <0016> lapd_core.c:232 ((0:4-T1-S0)) stop T203
|
733
|
DLLAPD INFO <0016> lapd_core.c:208 ((0:4-T1-S0)) start T200 (timeout=0.300000s)
|
734
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:4-T1-S0)) TX: 02 03 02 00 10 1a 1e 0d
|
735
|
DLLAPD INFO <0016> lapd_core.c:1888 ((0:4-T1-S0)) msg-len 4 sent 4 left 0 N201 260 length 0 first byte 10
|
736
|
DLMI ERROR <0019> input/dahdi.c:262 E1TS(0:7) TX: 10 1a 1e 0d
|
737
|
DLLAPD INFO <0016> lapd_core.c:2233 ((0:7-T2-S0)) Message DL-DATA-REQUEST received in state LAPD_STATE_MF_EST
|
738
|
DLLAPD INFO <0016> lapd_core.c:1816 ((0:7-T2-S0)) writing message to send-queue: l3len: 4
|
739
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:7-T2-S0)) lapd_send_i() called from line 1822
|
740
|
DLLAPD INFO <0016> lapd_core.c:1877 ((0:7-T2-S0)) get message from send-queue
|
741
|
DLLAPD INFO <0016> lapd_core.c:1888 ((0:7-T2-S0)) msg-len 4 sent 0 left 4 N201 260 length 4 first byte 10
|
742
|
DLLAPD INFO <0016> lapd_core.c:1897 ((0:7-T2-S0)) send I frame V(S)=1
|
743
|
DLLAPD INFO <0016> lapd_core.c:232 ((0:7-T2-S0)) stop T203
|
744
|
DLLAPD INFO <0016> lapd_core.c:208 ((0:7-T2-S0)) start T200 (timeout=0.300000s)
|
745
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:7-T2-S0)) TX: 02 05 02 00 10 1a 1e 0d
|
746
|
DLLAPD INFO <0016> lapd_core.c:1888 ((0:7-T2-S0)) msg-len 4 sent 4 left 0 N201 260 length 0 first byte 10
|
747
|
DLMI ERROR <0019> input/dahdi.c:262 E1TS(0:10) TX: 10 1a 1e 0d
|
748
|
DLLAPD INFO <0016> lapd_core.c:2233 ((0:10-T3-S0)) Message DL-DATA-REQUEST received in state LAPD_STATE_MF_EST
|
749
|
DLLAPD INFO <0016> lapd_core.c:1816 ((0:10-T3-S0)) writing message to send-queue: l3len: 4
|
750
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:10-T3-S0)) lapd_send_i() called from line 1822
|
751
|
DLLAPD INFO <0016> lapd_core.c:1877 ((0:10-T3-S0)) get message from send-queue
|
752
|
DLLAPD INFO <0016> lapd_core.c:1888 ((0:10-T3-S0)) msg-len 4 sent 0 left 4 N201 260 length 4 first byte 10
|
753
|
DLLAPD INFO <0016> lapd_core.c:1897 ((0:10-T3-S0)) send I frame V(S)=1
|
754
|
DLLAPD INFO <0016> lapd_core.c:232 ((0:10-T3-S0)) stop T203
|
755
|
DLLAPD INFO <0016> lapd_core.c:208 ((0:10-T3-S0)) start T200 (timeout=0.300000s)
|
756
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:10-T3-S0)) TX: 02 07 02 00 10 1a 1e 0d
|
757
|
DLLAPD INFO <0016> lapd_core.c:1888 ((0:10-T3-S0)) msg-len 4 sent 4 left 0 N201 260 length 0 first byte 10
|
758
|
DLMI ERROR <0019> input/dahdi.c:262 E1TS(0:1) TX: 10 1a 1e 05 0b 00 12 06 1d 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
|
759
|
DLLAPD INFO <0016> lapd_core.c:2233 ((0:1-T0-S0)) Message DL-DATA-REQUEST received in state LAPD_STATE_MF_EST
|
760
|
DLLAPD INFO <0016> lapd_core.c:1816 ((0:1-T0-S0)) writing message to send-queue: l3len: 25
|
761
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T0-S0)) lapd_send_i() called from line 1822
|
762
|
DLLAPD INFO <0016> lapd_core.c:1877 ((0:1-T0-S0)) get message from send-queue
|
763
|
DLLAPD INFO <0016> lapd_core.c:1888 ((0:1-T0-S0)) msg-len 25 sent 0 left 25 N201 260 length 25 first byte 10
|
764
|
DLLAPD INFO <0016> lapd_core.c:1897 ((0:1-T0-S0)) send I frame V(S)=7
|
765
|
DLLAPD INFO <0016> lapd_core.c:232 ((0:1-T0-S0)) stop T203
|
766
|
DLLAPD INFO <0016> lapd_core.c:208 ((0:1-T0-S0)) start T200 (timeout=0.300000s)
|
767
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T0-S0)) TX: 02 01 0e 0e 10 1a 1e 05 0b 00 12 06 1d 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
|
768
|
DLLAPD INFO <0016> lapd_core.c:1888 ((0:1-T0-S0)) msg-len 25 sent 25 left 0 N201 260 length 0 first byte 10
|
769
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:4) <= len = 4, sapi(0) tei(1)
|
770
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:4: RX: 02 03 01 04
|
771
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:4-T1-S0)) RR received in state LAPD_STATE_MF_EST
|
772
|
DLLAPD INFO <0016> lapd_core.c:765 ((0:4-T1-S0)) ack frame 1
|
773
|
DLLAPD INFO <0016> lapd_core.c:224 ((0:4-T1-S0)) stop T200
|
774
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:4-T1-S0)) start T203
|
775
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:4-T1-S0)) lapd_send_i() called from line 1373
|
776
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:7) <= len = 4, sapi(0) tei(2)
|
777
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:7: RX: 02 05 01 04
|
778
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:7-T2-S0)) RR received in state LAPD_STATE_MF_EST
|
779
|
DLLAPD INFO <0016> lapd_core.c:765 ((0:7-T2-S0)) ack frame 1
|
780
|
DLLAPD INFO <0016> lapd_core.c:224 ((0:7-T2-S0)) stop T200
|
781
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:7-T2-S0)) start T203
|
782
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:7-T2-S0)) lapd_send_i() called from line 1373
|
783
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:10) <= len = 4, sapi(0) tei(3)
|
784
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:10: RX: 02 07 01 04
|
785
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:10-T3-S0)) RR received in state LAPD_STATE_MF_EST
|
786
|
DLLAPD INFO <0016> lapd_core.c:765 ((0:10-T3-S0)) ack frame 1
|
787
|
DLLAPD INFO <0016> lapd_core.c:224 ((0:10-T3-S0)) stop T200
|
788
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:10-T3-S0)) start T203
|
789
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:10-T3-S0)) lapd_send_i() called from line 1373
|
790
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 4, sapi(0) tei(0)
|
791
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: 02 01 01 10
|
792
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:1-T0-S0)) RR received in state LAPD_STATE_MF_EST
|
793
|
DLLAPD INFO <0016> lapd_core.c:765 ((0:1-T0-S0)) ack frame 7
|
794
|
DLLAPD INFO <0016> lapd_core.c:224 ((0:1-T0-S0)) stop T200
|
795
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T0-S0)) start T203
|
796
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T0-S0)) lapd_send_i() called from line 1373
|
797
|
DLMI ERROR <0019> input/dahdi.c:262 E1TS(0:4) TX: 10 1a 1e 0e
|
798
|
DLLAPD INFO <0016> lapd_core.c:2233 ((0:4-T1-S0)) Message DL-DATA-REQUEST received in state LAPD_STATE_MF_EST
|
799
|
DLLAPD INFO <0016> lapd_core.c:1816 ((0:4-T1-S0)) writing message to send-queue: l3len: 4
|
800
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:4-T1-S0)) lapd_send_i() called from line 1822
|
801
|
DLLAPD INFO <0016> lapd_core.c:1877 ((0:4-T1-S0)) get message from send-queue
|
802
|
DLLAPD INFO <0016> lapd_core.c:1888 ((0:4-T1-S0)) msg-len 4 sent 0 left 4 N201 260 length 4 first byte 10
|
803
|
DLLAPD INFO <0016> lapd_core.c:1897 ((0:4-T1-S0)) send I frame V(S)=2
|
804
|
DLLAPD INFO <0016> lapd_core.c:232 ((0:4-T1-S0)) stop T203
|
805
|
DLLAPD INFO <0016> lapd_core.c:208 ((0:4-T1-S0)) start T200 (timeout=0.300000s)
|
806
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:4-T1-S0)) TX: 02 03 04 00 10 1a 1e 0e
|
807
|
DLLAPD INFO <0016> lapd_core.c:1888 ((0:4-T1-S0)) msg-len 4 sent 4 left 0 N201 260 length 0 first byte 10
|
808
|
DLMI ERROR <0019> input/dahdi.c:262 E1TS(0:7) TX: 10 1a 1e 0e
|
809
|
DLLAPD INFO <0016> lapd_core.c:2233 ((0:7-T2-S0)) Message DL-DATA-REQUEST received in state LAPD_STATE_MF_EST
|
810
|
DLLAPD INFO <0016> lapd_core.c:1816 ((0:7-T2-S0)) writing message to send-queue: l3len: 4
|
811
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:7-T2-S0)) lapd_send_i() called from line 1822
|
812
|
DLLAPD INFO <0016> lapd_core.c:1877 ((0:7-T2-S0)) get message from send-queue
|
813
|
DLLAPD INFO <0016> lapd_core.c:1888 ((0:7-T2-S0)) msg-len 4 sent 0 left 4 N201 260 length 4 first byte 10
|
814
|
DLLAPD INFO <0016> lapd_core.c:1897 ((0:7-T2-S0)) send I frame V(S)=2
|
815
|
DLLAPD INFO <0016> lapd_core.c:232 ((0:7-T2-S0)) stop T203
|
816
|
DLLAPD INFO <0016> lapd_core.c:208 ((0:7-T2-S0)) start T200 (timeout=0.300000s)
|
817
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:7-T2-S0)) TX: 02 05 04 00 10 1a 1e 0e
|
818
|
DLLAPD INFO <0016> lapd_core.c:1888 ((0:7-T2-S0)) msg-len 4 sent 4 left 0 N201 260 length 0 first byte 10
|
819
|
DLMI ERROR <0019> input/dahdi.c:262 E1TS(0:10) TX: 10 1a 1e 0e
|
820
|
DLLAPD INFO <0016> lapd_core.c:2233 ((0:10-T3-S0)) Message DL-DATA-REQUEST received in state LAPD_STATE_MF_EST
|
821
|
DLLAPD INFO <0016> lapd_core.c:1816 ((0:10-T3-S0)) writing message to send-queue: l3len: 4
|
822
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:10-T3-S0)) lapd_send_i() called from line 1822
|
823
|
DLLAPD INFO <0016> lapd_core.c:1877 ((0:10-T3-S0)) get message from send-queue
|
824
|
DLLAPD INFO <0016> lapd_core.c:1888 ((0:10-T3-S0)) msg-len 4 sent 0 left 4 N201 260 length 4 first byte 10
|
825
|
DLLAPD INFO <0016> lapd_core.c:1897 ((0:10-T3-S0)) send I frame V(S)=2
|
826
|
DLLAPD INFO <0016> lapd_core.c:232 ((0:10-T3-S0)) stop T203
|
827
|
DLLAPD INFO <0016> lapd_core.c:208 ((0:10-T3-S0)) start T200 (timeout=0.300000s)
|
828
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:10-T3-S0)) TX: 02 07 04 00 10 1a 1e 0e
|
829
|
DLLAPD INFO <0016> lapd_core.c:1888 ((0:10-T3-S0)) msg-len 4 sent 4 left 0 N201 260 length 0 first byte 10
|
830
|
DLMI ERROR <0019> input/dahdi.c:262 E1TS(0:1) TX: 10 1a 1e 0d
|
831
|
DLLAPD INFO <0016> lapd_core.c:2233 ((0:1-T0-S0)) Message DL-DATA-REQUEST received in state LAPD_STATE_MF_EST
|
832
|
DLLAPD INFO <0016> lapd_core.c:1816 ((0:1-T0-S0)) writing message to send-queue: l3len: 4
|
833
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T0-S0)) lapd_send_i() called from line 1822
|
834
|
DLLAPD INFO <0016> lapd_core.c:1877 ((0:1-T0-S0)) get message from send-queue
|
835
|
DLLAPD INFO <0016> lapd_core.c:1888 ((0:1-T0-S0)) msg-len 4 sent 0 left 4 N201 260 length 4 first byte 10
|
836
|
DLLAPD INFO <0016> lapd_core.c:1897 ((0:1-T0-S0)) send I frame V(S)=8
|
837
|
DLLAPD INFO <0016> lapd_core.c:232 ((0:1-T0-S0)) stop T203
|
838
|
DLLAPD INFO <0016> lapd_core.c:208 ((0:1-T0-S0)) start T200 (timeout=0.300000s)
|
839
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T0-S0)) TX: 02 01 10 0e 10 1a 1e 0d
|
840
|
DLLAPD INFO <0016> lapd_core.c:1888 ((0:1-T0-S0)) msg-len 4 sent 4 left 0 N201 260 length 0 first byte 10
|
841
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:4) <= len = 4, sapi(0) tei(1)
|
842
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:4: RX: 02 03 01 06
|
843
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:4-T1-S0)) RR received in state LAPD_STATE_MF_EST
|
844
|
DLLAPD INFO <0016> lapd_core.c:765 ((0:4-T1-S0)) ack frame 2
|
845
|
DLLAPD INFO <0016> lapd_core.c:224 ((0:4-T1-S0)) stop T200
|
846
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:4-T1-S0)) start T203
|
847
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:4-T1-S0)) lapd_send_i() called from line 1373
|
848
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:7) <= len = 4, sapi(0) tei(2)
|
849
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:7: RX: 02 05 01 06
|
850
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:7-T2-S0)) RR received in state LAPD_STATE_MF_EST
|
851
|
DLLAPD INFO <0016> lapd_core.c:765 ((0:7-T2-S0)) ack frame 2
|
852
|
DLLAPD INFO <0016> lapd_core.c:224 ((0:7-T2-S0)) stop T200
|
853
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:7-T2-S0)) start T203
|
854
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:7-T2-S0)) lapd_send_i() called from line 1373
|
855
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:10) <= len = 4, sapi(0) tei(3)
|
856
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:10: RX: 02 07 01 06
|
857
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:10-T3-S0)) RR received in state LAPD_STATE_MF_EST
|
858
|
DLLAPD INFO <0016> lapd_core.c:765 ((0:10-T3-S0)) ack frame 2
|
859
|
DLLAPD INFO <0016> lapd_core.c:224 ((0:10-T3-S0)) stop T200
|
860
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:10-T3-S0)) start T203
|
861
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:10-T3-S0)) lapd_send_i() called from line 1373
|
862
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 4, sapi(0) tei(0)
|
863
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: 02 01 01 12
|
864
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:1-T0-S0)) RR received in state LAPD_STATE_MF_EST
|
865
|
DLLAPD INFO <0016> lapd_core.c:765 ((0:1-T0-S0)) ack frame 8
|
866
|
DLLAPD INFO <0016> lapd_core.c:224 ((0:1-T0-S0)) stop T200
|
867
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T0-S0)) start T203
|
868
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T0-S0)) lapd_send_i() called from line 1373
|
869
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:4) <= len = 11, sapi(0) tei(1)
|
870
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:4: RX: 00 03 00 06 10 1c 1a 01 3f 1c 1a
|
871
|
DLLAPD INFO <0016> lapd_core.c:1520 ((0:4-T1-S0)) I received in state LAPD_STATE_MF_EST on SAPI(0)
|
872
|
DLLAPD INFO <0016> lapd_core.c:1606 ((0:4-T1-S0)) incrementing V(R) to 1
|
873
|
DLLAPD INFO <0016> lapd_core.c:232 ((0:4-T1-S0)) stop T203
|
874
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:4-T1-S0)) start T203
|
875
|
DLLAPD INFO <0016> lapd_core.c:1615 ((0:4-T1-S0)) message in single I frame
|
876
|
DLMI DEBUG <0019> e1_input.c:752 E1TS(0:4) RX: 10 1c 1a 01 3f 1c 1a sapi=0 tei=1
|
877
|
DLMI ERROR <0019> e1_config.c:133 (bts=0,trx=1) discarding RSL message received in locked administrative state
|
878
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:4-T1-S0)) lapd_send_i() called from line 1672
|
879
|
DLLAPD INFO <0016> lapd_core.c:1681 ((0:4-T1-S0)) we are not busy and have no pending data, send RR
|
880
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:4-T1-S0)) TX: 00 03 01 02
|
881
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:7) <= len = 11, sapi(0) tei(2)
|
882
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:7: RX: 00 05 00 06 10 1c 1a 01 3f 1c 1a
|
883
|
DLLAPD INFO <0016> lapd_core.c:1520 ((0:7-T2-S0)) I received in state LAPD_STATE_MF_EST on SAPI(0)
|
884
|
DLLAPD INFO <0016> lapd_core.c:1606 ((0:7-T2-S0)) incrementing V(R) to 1
|
885
|
DLLAPD INFO <0016> lapd_core.c:232 ((0:7-T2-S0)) stop T203
|
886
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:7-T2-S0)) start T203
|
887
|
DLLAPD INFO <0016> lapd_core.c:1615 ((0:7-T2-S0)) message in single I frame
|
888
|
DLMI DEBUG <0019> e1_input.c:752 E1TS(0:7) RX: 10 1c 1a 01 3f 1c 1a sapi=0 tei=2
|
889
|
DLMI ERROR <0019> e1_config.c:133 (bts=0,trx=2) discarding RSL message received in locked administrative state
|
890
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:7-T2-S0)) lapd_send_i() called from line 1672
|
891
|
DLLAPD INFO <0016> lapd_core.c:1681 ((0:7-T2-S0)) we are not busy and have no pending data, send RR
|
892
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:7-T2-S0)) TX: 00 05 01 02
|
893
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:10) <= len = 11, sapi(0) tei(3)
|
894
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:10: RX: 00 07 00 06 10 1c 1a 01 3f 1c 1a
|
895
|
DLLAPD INFO <0016> lapd_core.c:1520 ((0:10-T3-S0)) I received in state LAPD_STATE_MF_EST on SAPI(0)
|
896
|
DLLAPD INFO <0016> lapd_core.c:1606 ((0:10-T3-S0)) incrementing V(R) to 1
|
897
|
DLLAPD INFO <0016> lapd_core.c:232 ((0:10-T3-S0)) stop T203
|
898
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:10-T3-S0)) start T203
|
899
|
DLLAPD INFO <0016> lapd_core.c:1615 ((0:10-T3-S0)) message in single I frame
|
900
|
DLMI DEBUG <0019> e1_input.c:752 E1TS(0:10) RX: 10 1c 1a 01 3f 1c 1a sapi=0 tei=3
|
901
|
DLMI ERROR <0019> e1_config.c:133 (bts=0,trx=3) discarding RSL message received in locked administrative state
|
902
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:10-T3-S0)) lapd_send_i() called from line 1672
|
903
|
DLLAPD INFO <0016> lapd_core.c:1681 ((0:10-T3-S0)) we are not busy and have no pending data, send RR
|
904
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:10-T3-S0)) TX: 00 07 01 02
|
905
|
DLMI ERROR <0019> input/dahdi.c:262 E1TS(0:4) TX: 10 1a 1e 06 0b 00 0c 06 1e 00 00 09 f1 07 00 01 27 ff 2b
|
906
|
DLLAPD INFO <0016> lapd_core.c:2233 ((0:4-T1-S0)) Message DL-DATA-REQUEST received in state LAPD_STATE_MF_EST
|
907
|
DLLAPD INFO <0016> lapd_core.c:1816 ((0:4-T1-S0)) writing message to send-queue: l3len: 19
|
908
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:4-T1-S0)) lapd_send_i() called from line 1822
|
909
|
DLLAPD INFO <0016> lapd_core.c:1877 ((0:4-T1-S0)) get message from send-queue
|
910
|
DLLAPD INFO <0016> lapd_core.c:1888 ((0:4-T1-S0)) msg-len 19 sent 0 left 19 N201 260 length 19 first byte 10
|
911
|
DLLAPD INFO <0016> lapd_core.c:1897 ((0:4-T1-S0)) send I frame V(S)=3
|
912
|
DLLAPD INFO <0016> lapd_core.c:232 ((0:4-T1-S0)) stop T203
|
913
|
DLLAPD INFO <0016> lapd_core.c:208 ((0:4-T1-S0)) start T200 (timeout=0.300000s)
|
914
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:4-T1-S0)) TX: 02 03 06 02 10 1a 1e 06 0b 00 0c 06 1e 00 00 09 f1 07 00 01 27 ff 2b
|
915
|
DLLAPD INFO <0016> lapd_core.c:1888 ((0:4-T1-S0)) msg-len 19 sent 19 left 0 N201 260 length 0 first byte 10
|
916
|
DLMI ERROR <0019> input/dahdi.c:262 E1TS(0:7) TX: 10 1a 1e 06 0b 00 0c 06 1e 00 00 09 f1 07 00 01 27 ff 2b
|
917
|
DLLAPD INFO <0016> lapd_core.c:2233 ((0:7-T2-S0)) Message DL-DATA-REQUEST received in state LAPD_STATE_MF_EST
|
918
|
DLLAPD INFO <0016> lapd_core.c:1816 ((0:7-T2-S0)) writing message to send-queue: l3len: 19
|
919
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:7-T2-S0)) lapd_send_i() called from line 1822
|
920
|
DLLAPD INFO <0016> lapd_core.c:1877 ((0:7-T2-S0)) get message from send-queue
|
921
|
DLLAPD INFO <0016> lapd_core.c:1888 ((0:7-T2-S0)) msg-len 19 sent 0 left 19 N201 260 length 19 first byte 10
|
922
|
DLLAPD INFO <0016> lapd_core.c:1897 ((0:7-T2-S0)) send I frame V(S)=3
|
923
|
DLLAPD INFO <0016> lapd_core.c:232 ((0:7-T2-S0)) stop T203
|
924
|
DLLAPD INFO <0016> lapd_core.c:208 ((0:7-T2-S0)) start T200 (timeout=0.300000s)
|
925
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:7-T2-S0)) TX: 02 05 06 02 10 1a 1e 06 0b 00 0c 06 1e 00 00 09 f1 07 00 01 27 ff 2b
|
926
|
DLLAPD INFO <0016> lapd_core.c:1888 ((0:7-T2-S0)) msg-len 19 sent 19 left 0 N201 260 length 0 first byte 10
|
927
|
DLMI ERROR <0019> input/dahdi.c:262 E1TS(0:10) TX: 10 1a 1e 06 0b 00 0c 06 1e 00 00 09 f1 07 00 01 27 ff 2b
|
928
|
DLLAPD INFO <0016> lapd_core.c:2233 ((0:10-T3-S0)) Message DL-DATA-REQUEST received in state LAPD_STATE_MF_EST
|
929
|
DLLAPD INFO <0016> lapd_core.c:1816 ((0:10-T3-S0)) writing message to send-queue: l3len: 19
|
930
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:10-T3-S0)) lapd_send_i() called from line 1822
|
931
|
DLLAPD INFO <0016> lapd_core.c:1877 ((0:10-T3-S0)) get message from send-queue
|
932
|
DLLAPD INFO <0016> lapd_core.c:1888 ((0:10-T3-S0)) msg-len 19 sent 0 left 19 N201 260 length 19 first byte 10
|
933
|
DLLAPD INFO <0016> lapd_core.c:1897 ((0:10-T3-S0)) send I frame V(S)=3
|
934
|
DLLAPD INFO <0016> lapd_core.c:232 ((0:10-T3-S0)) stop T203
|
935
|
DLLAPD INFO <0016> lapd_core.c:208 ((0:10-T3-S0)) start T200 (timeout=0.300000s)
|
936
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:10-T3-S0)) TX: 02 07 06 02 10 1a 1e 06 0b 00 0c 06 1e 00 00 09 f1 07 00 01 27 ff 2b
|
937
|
DLLAPD INFO <0016> lapd_core.c:1888 ((0:10-T3-S0)) msg-len 19 sent 19 left 0 N201 260 length 0 first byte 10
|
938
|
DLMI ERROR <0019> input/dahdi.c:262 E1TS(0:1) TX: 10 1a 1e 0e
|
939
|
DLLAPD INFO <0016> lapd_core.c:2233 ((0:1-T0-S0)) Message DL-DATA-REQUEST received in state LAPD_STATE_MF_EST
|
940
|
DLLAPD INFO <0016> lapd_core.c:1816 ((0:1-T0-S0)) writing message to send-queue: l3len: 4
|
941
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T0-S0)) lapd_send_i() called from line 1822
|
942
|
DLLAPD INFO <0016> lapd_core.c:1877 ((0:1-T0-S0)) get message from send-queue
|
943
|
DLLAPD INFO <0016> lapd_core.c:1888 ((0:1-T0-S0)) msg-len 4 sent 0 left 4 N201 260 length 4 first byte 10
|
944
|
DLLAPD INFO <0016> lapd_core.c:1897 ((0:1-T0-S0)) send I frame V(S)=9
|
945
|
DLLAPD INFO <0016> lapd_core.c:232 ((0:1-T0-S0)) stop T203
|
946
|
DLLAPD INFO <0016> lapd_core.c:208 ((0:1-T0-S0)) start T200 (timeout=0.300000s)
|
947
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T0-S0)) TX: 02 01 12 0e 10 1a 1e 0e
|
948
|
DLLAPD INFO <0016> lapd_core.c:1888 ((0:1-T0-S0)) msg-len 4 sent 4 left 0 N201 260 length 0 first byte 10
|
949
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 4, sapi(0) tei(0)
|
950
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: 02 01 01 14
|
951
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:1-T0-S0)) RR received in state LAPD_STATE_MF_EST
|
952
|
DLLAPD INFO <0016> lapd_core.c:765 ((0:1-T0-S0)) ack frame 9
|
953
|
DLLAPD INFO <0016> lapd_core.c:224 ((0:1-T0-S0)) stop T200
|
954
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T0-S0)) start T203
|
955
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T0-S0)) lapd_send_i() called from line 1373
|
956
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:4) <= len = 4, sapi(0) tei(1)
|
957
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:4: RX: 02 03 01 08
|
958
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:4-T1-S0)) RR received in state LAPD_STATE_MF_EST
|
959
|
DLLAPD INFO <0016> lapd_core.c:765 ((0:4-T1-S0)) ack frame 3
|
960
|
DLLAPD INFO <0016> lapd_core.c:224 ((0:4-T1-S0)) stop T200
|
961
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:4-T1-S0)) start T203
|
962
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:4-T1-S0)) lapd_send_i() called from line 1373
|
963
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:7) <= len = 4, sapi(0) tei(2)
|
964
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:7: RX: 02 05 01 08
|
965
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:7-T2-S0)) RR received in state LAPD_STATE_MF_EST
|
966
|
DLLAPD INFO <0016> lapd_core.c:765 ((0:7-T2-S0)) ack frame 3
|
967
|
DLLAPD INFO <0016> lapd_core.c:224 ((0:7-T2-S0)) stop T200
|
968
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:7-T2-S0)) start T203
|
969
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:7-T2-S0)) lapd_send_i() called from line 1373
|
970
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 11, sapi(0) tei(0)
|
971
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: 00 01 0e 14 10 1c 1a 01 3f 1c 1a
|
972
|
DLLAPD INFO <0016> lapd_core.c:1520 ((0:1-T0-S0)) I received in state LAPD_STATE_MF_EST on SAPI(0)
|
973
|
DLLAPD INFO <0016> lapd_core.c:1606 ((0:1-T0-S0)) incrementing V(R) to 8
|
974
|
DLLAPD INFO <0016> lapd_core.c:232 ((0:1-T0-S0)) stop T203
|
975
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T0-S0)) start T203
|
976
|
DLLAPD INFO <0016> lapd_core.c:1615 ((0:1-T0-S0)) message in single I frame
|
977
|
DLMI DEBUG <0019> e1_input.c:752 E1TS(0:1) RX: 10 1c 1a 01 3f 1c 1a sapi=0 tei=0
|
978
|
DLMI ERROR <0019> e1_config.c:133 (bts=0,trx=0) discarding RSL message received in locked administrative state
|
979
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T0-S0)) lapd_send_i() called from line 1672
|
980
|
DLLAPD INFO <0016> lapd_core.c:1681 ((0:1-T0-S0)) we are not busy and have no pending data, send RR
|
981
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T0-S0)) TX: 00 01 01 10
|
982
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:10) <= len = 4, sapi(0) tei(3)
|
983
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:10: RX: 02 07 01 08
|
984
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:10-T3-S0)) RR received in state LAPD_STATE_MF_EST
|
985
|
DLLAPD INFO <0016> lapd_core.c:765 ((0:10-T3-S0)) ack frame 3
|
986
|
DLLAPD INFO <0016> lapd_core.c:224 ((0:10-T3-S0)) stop T200
|
987
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:10-T3-S0)) start T203
|
988
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:10-T3-S0)) lapd_send_i() called from line 1373
|
989
|
DLMI ERROR <0019> input/dahdi.c:262 E1TS(0:1) TX: 10 1a 1e 06 0b 00 0c 06 1e 00 00 09 f1 07 00 01 27 ff 2b
|
990
|
DLLAPD INFO <0016> lapd_core.c:2233 ((0:1-T0-S0)) Message DL-DATA-REQUEST received in state LAPD_STATE_MF_EST
|
991
|
DLLAPD INFO <0016> lapd_core.c:1816 ((0:1-T0-S0)) writing message to send-queue: l3len: 19
|
992
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T0-S0)) lapd_send_i() called from line 1822
|
993
|
DLLAPD INFO <0016> lapd_core.c:1877 ((0:1-T0-S0)) get message from send-queue
|
994
|
DLLAPD INFO <0016> lapd_core.c:1888 ((0:1-T0-S0)) msg-len 19 sent 0 left 19 N201 260 length 19 first byte 10
|
995
|
DLLAPD INFO <0016> lapd_core.c:1897 ((0:1-T0-S0)) send I frame V(S)=10
|
996
|
DLLAPD INFO <0016> lapd_core.c:232 ((0:1-T0-S0)) stop T203
|
997
|
DLLAPD INFO <0016> lapd_core.c:208 ((0:1-T0-S0)) start T200 (timeout=0.300000s)
|
998
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T0-S0)) TX: 02 01 14 10 10 1a 1e 06 0b 00 0c 06 1e 00 00 09 f1 07 00 01 27 ff 2b
|
999
|
DLLAPD INFO <0016> lapd_core.c:1888 ((0:1-T0-S0)) msg-len 19 sent 19 left 0 N201 260 length 0 first byte 10
|
1000
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 4, sapi(0) tei(0)
|
1001
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: 02 01 01 16
|
1002
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:1-T0-S0)) RR received in state LAPD_STATE_MF_EST
|
1003
|
DLLAPD INFO <0016> lapd_core.c:765 ((0:1-T0-S0)) ack frame 10
|
1004
|
DLLAPD INFO <0016> lapd_core.c:224 ((0:1-T0-S0)) stop T200
|
1005
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T0-S0)) start T203
|
1006
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T0-S0)) lapd_send_i() called from line 1373
|
1007
|
DLLAPD INFO <0016> lapd_core.c:594 ((0:1-T62-S62)) Timeout T200 state=LAPD_STATE_SABM_SENT
|
1008
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T62-S62)) TX: fa 7d 7f
|
1009
|
DLLAPD INFO <0016> lapd_core.c:208 ((0:1-T62-S62)) start T200 (timeout=0.300000s)
|
1010
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 3, sapi(62) tei(62)
|
1011
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: fa 7d 73
|
1012
|
DLLAPD INFO <0016> lapd_core.c:1170 ((0:1-T62-S62)) UA received in state LAPD_STATE_SABM_SENT
|
1013
|
DLLAPD INFO <0016> lapd_core.c:1224 ((0:1-T62-S62)) UA in SABM state
|
1014
|
DLLAPD INFO <0016> lapd_core.c:224 ((0:1-T62-S62)) stop T200
|
1015
|
DLLAPD INFO <0016> lapd_core.c:239 ((0:1-T62-S62)) new state LAPD_STATE_SABM_SENT -> LAPD_STATE_MF_EST
|
1016
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T62-S62)) start T203
|
1017
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T62-S62)) lapd_send_i() called from line 1250
|
1018
|
DLLAPD NOTICE <0016> input/lapd.c:659 ((0:1-T62-S62)) LAPD DL-ESTABLISH confirm TEI=62 SAPI=62
|
1019
|
DLMI DEBUG <0019> e1_input.c:739 E1TS(0:1) DL_EST: sapi(62) tei(62)
|
1020
|
DNM DEBUG <0004> bts_ericsson_rbs2000.c:126 inp_sig_cb(): Input signal 'TEI-UP' received
|
1021
|
DNM NOTICE <0004> bts_ericsson_rbs2000.c:40 bootstrapping OML for BTS 0
|
1022
|
DNM DEBUG <0004> fsm.c:461 OM2000-BTS(0)[0x556b6667de60]{INIT}: Allocated
|
1023
|
DNM DEBUG <0004> abis_om2000.c:2569 OM2000-BTS(0)[0x556b6667de60]{INIT}: Received Event START
|
1024
|
DNM DEBUG <0004> abis_om2000.c:2362 OM2000-BTS(0)[0x556b6667de60]{INIT}: state_chg to WAIT-CF
|
1025
|
DNM DEBUG <0004> fsm.c:461 OM2000-MO(0-CF-00-ff-00)[0x556b66656550]{INIT}: Allocated
|
1026
|
DNM DEBUG <0004> abis_om2000.c:66 OM2000-MO(0-CF-00-ff-00)[0x556b66656550]{INIT}: is child of OM2000-BTS(0)[0x556b6667de60]
|
1027
|
DNM DEBUG <0004> abis_om2000.c:2020 OM2000-MO(0-CF-00-ff-00)[0x556b66656550]{INIT}: Received Event START
|
1028
|
DNM DEBUG <0004> abis_om2000.c:1680 OM2000-MO(0-CF-00-ff-00)[0x556b66656550]{INIT}: state_chg to WAIT-START-ACCEPT
|
1029
|
DNM DEBUG <0004> abis_om2000.c:1115 Tx MO=CF/00/ff/00 Start Request
|
1030
|
DLMI DEBUG <0019> osmo_bsc_main.c:386 inp_sig_cb(): Input signal 'TEI-UP' received
|
1031
|
DNM NOTICE <0004> abis_nm.c:1808 Getting attributes from BTS0 type rbs2000 is not supported.
|
1032
|
DNM NOTICE <0004> abis_nm.c:1808 Getting attributes from BTS0 type rbs2000 is not supported.
|
1033
|
DNM NOTICE <0004> abis_nm.c:1808 Getting attributes from BTS0 type rbs2000 is not supported.
|
1034
|
DNM NOTICE <0004> abis_nm.c:1808 Getting attributes from BTS0 type rbs2000 is not supported.
|
1035
|
DNM NOTICE <0004> abis_nm.c:1808 Getting attributes from BTS0 type rbs2000 is not supported.
|
1036
|
DLMI ERROR <0019> input/dahdi.c:262 E1TS(0:1) TX: 80 80 00 06 00 84 0a 00 ff 00
|
1037
|
DLLAPD INFO <0016> lapd_core.c:2233 ((0:1-T62-S62)) Message DL-DATA-REQUEST received in state LAPD_STATE_MF_EST
|
1038
|
DLLAPD INFO <0016> lapd_core.c:1816 ((0:1-T62-S62)) writing message to send-queue: l3len: 10
|
1039
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T62-S62)) lapd_send_i() called from line 1822
|
1040
|
DLLAPD INFO <0016> lapd_core.c:1877 ((0:1-T62-S62)) get message from send-queue
|
1041
|
DLLAPD INFO <0016> lapd_core.c:1888 ((0:1-T62-S62)) msg-len 10 sent 0 left 10 N201 260 length 10 first byte 80
|
1042
|
DLLAPD INFO <0016> lapd_core.c:1897 ((0:1-T62-S62)) send I frame V(S)=0
|
1043
|
DLLAPD INFO <0016> lapd_core.c:232 ((0:1-T62-S62)) stop T203
|
1044
|
DLLAPD INFO <0016> lapd_core.c:208 ((0:1-T62-S62)) start T200 (timeout=0.300000s)
|
1045
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T62-S62)) TX: fa 7d 00 00 80 80 00 06 00 84 0a 00 ff 00
|
1046
|
DLLAPD INFO <0016> lapd_core.c:1861 ((0:1-T62-S62)) k frames outstanding, not sending more (k=1 V(S)=1 V(A)=0)
|
1047
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 76, sapi(62) tei(62)
|
1048
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: f8 7d 00 00 80 80 00 44 00 42 0a 00 ff 00 23 00 00 00 00 00 00 24 00 00 00 00 00 00 25 00 00 00 02 00 08 14 00 00 15 40 00 34 81 00 00 00 04 00 2c 01 2a 00 26 20 04 20 00 00 02 50 00 20 00 00 00 00 b9 00 00 d2 00 00 00 00 00 00
|
1049
|
DLLAPD INFO <0016> lapd_core.c:1520 ((0:1-T62-S62)) I received in state LAPD_STATE_MF_EST on SAPI(62)
|
1050
|
DLLAPD INFO <0016> lapd_core.c:1606 ((0:1-T62-S62)) incrementing V(R) to 1
|
1051
|
DLLAPD INFO <0016> lapd_core.c:1615 ((0:1-T62-S62)) message in single I frame
|
1052
|
DLMI DEBUG <0019> e1_input.c:752 E1TS(0:1) RX: 80 80 00 44 00 42 0a 00 ff 00 23 00 00 00 00 00 00 24 00 00 00 00 00 00 25 00 00 00 02 00 08 14 00 00 15 40 00 34 81 00 00 00 04 00 2c 01 2a 00 26 20 04 20 00 00 02 50 00 20 00 00 00 00 b9 00 00 d2 00 00 00 00 00 00 sapi=62 tei=62
|
1053
|
DNM DEBUG <0004> abis_om2000.c:2914 Rx MO=CF/00/ff/00 Fault Report (80 80 00 44 00 42 0a 00 ff 00 23 00 00 00 00 00 00 24 00 00 00 00 00 00 25 00 00 00 02 00 08 14 00 00 15 40 00 34 81 00 00 00 04 00 2c 01 2a 00 26 20 04 20 00 00 02 50 00 20 00 00 00 00 b9 00 00 d2 00 00 00 00 00 00 )
|
1054
|
DNM DEBUG <0004> abis_om2000.c:2740 Rx MO=CF/00/ff/00 Fault Report, MO State: STARTED
|
1055
|
DNM DEBUG <0004> abis_om2000.c:2789 Rx MO=CF/00/ff/00 Fault Report: Internal Fault Map Class 2A (25,43)
|
1056
|
DNM DEBUG <0004> abis_om2000.c:2789 Rx MO=CF/00/ff/00 Fault Report: External Condition Map Class 2 (6)
|
1057
|
DNM DEBUG <0004> abis_om2000.c:2789 Rx MO=CF/00/ff/00 Fault Report: Replacement Unit Map (0,7,34)
|
1058
|
DNM DEBUG <0004> abis_om2000.c:2789 Rx MO=CF/00/ff/00 Fault Report: Internal Fault Map Class 2A Extension (5,10,21,41)
|
1059
|
DNM DEBUG <0004> abis_om2000.c:2789 Rx MO=CF/00/ff/00 Fault Report: Replacement Unit Map Extension (13)
|
1060
|
DNM ERROR <0004> abis_om2000.c:2848 Rx MO=CF/00/ff/00 Fault Report: invalid tlv element!
|
1061
|
DNM DEBUG <0004> abis_om2000.c:1115 Tx MO=CF/00/ff/00 Fault Report ACK
|
1062
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T62-S62)) lapd_send_i() called from line 1672
|
1063
|
DLLAPD INFO <0016> lapd_core.c:1861 ((0:1-T62-S62)) k frames outstanding, not sending more (k=1 V(S)=1 V(A)=0)
|
1064
|
DLLAPD INFO <0016> lapd_core.c:1681 ((0:1-T62-S62)) we are not busy and have no pending data, send RR
|
1065
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T62-S62)) TX: f8 7d 01 02
|
1066
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 4, sapi(62) tei(62)
|
1067
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: fa 7d 01 02
|
1068
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:1-T62-S62)) RR received in state LAPD_STATE_MF_EST
|
1069
|
DLLAPD INFO <0016> lapd_core.c:765 ((0:1-T62-S62)) ack frame 0
|
1070
|
DLLAPD INFO <0016> lapd_core.c:224 ((0:1-T62-S62)) stop T200
|
1071
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T62-S62)) start T203
|
1072
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T62-S62)) lapd_send_i() called from line 1373
|
1073
|
DLLAPD INFO <0016> lapd_core.c:1888 ((0:1-T62-S62)) msg-len 10 sent 10 left 0 N201 260 length 0 first byte 80
|
1074
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 14, sapi(62) tei(62)
|
1075
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: f8 7d 02 02 80 80 00 06 00 86 0a 00 ff 00
|
1076
|
DLLAPD INFO <0016> lapd_core.c:1520 ((0:1-T62-S62)) I received in state LAPD_STATE_MF_EST on SAPI(62)
|
1077
|
DLLAPD INFO <0016> lapd_core.c:1606 ((0:1-T62-S62)) incrementing V(R) to 2
|
1078
|
DLLAPD INFO <0016> lapd_core.c:232 ((0:1-T62-S62)) stop T203
|
1079
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T62-S62)) start T203
|
1080
|
DLLAPD INFO <0016> lapd_core.c:1615 ((0:1-T62-S62)) message in single I frame
|
1081
|
DLMI DEBUG <0019> e1_input.c:752 E1TS(0:1) RX: 80 80 00 06 00 86 0a 00 ff 00 sapi=62 tei=62
|
1082
|
DNM DEBUG <0004> abis_om2000.c:2914 Rx MO=CF/00/ff/00 Start Request Accept (80 80 00 06 00 86 0a 00 ff 00 )
|
1083
|
DNM DEBUG <0004> abis_om2000.c:2044 OM2000-MO(0-CF-00-ff-00)[0x556b66656550]{WAIT-START-ACCEPT}: Received Event RX-RESET-REQ-ACCEPT
|
1084
|
DNM DEBUG <0004> abis_om2000.c:1735 OM2000-MO(0-CF-00-ff-00)[0x556b66656550]{WAIT-START-ACCEPT}: state_chg to WAIT-START-RES
|
1085
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T62-S62)) lapd_send_i() called from line 1672
|
1086
|
DLLAPD INFO <0016> lapd_core.c:1681 ((0:1-T62-S62)) we are not busy and have no pending data, send RR
|
1087
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T62-S62)) TX: f8 7d 01 04
|
1088
|
DLMI ERROR <0019> input/dahdi.c:262 E1TS(0:1) TX: 80 80 00 06 00 40 0a 00 ff 00
|
1089
|
DLLAPD INFO <0016> lapd_core.c:2233 ((0:1-T62-S62)) Message DL-DATA-REQUEST received in state LAPD_STATE_MF_EST
|
1090
|
DLLAPD INFO <0016> lapd_core.c:1816 ((0:1-T62-S62)) writing message to send-queue: l3len: 10
|
1091
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T62-S62)) lapd_send_i() called from line 1822
|
1092
|
DLLAPD INFO <0016> lapd_core.c:1877 ((0:1-T62-S62)) get message from send-queue
|
1093
|
DLLAPD INFO <0016> lapd_core.c:1888 ((0:1-T62-S62)) msg-len 10 sent 0 left 10 N201 260 length 10 first byte 80
|
1094
|
DLLAPD INFO <0016> lapd_core.c:1897 ((0:1-T62-S62)) send I frame V(S)=1
|
1095
|
DLLAPD INFO <0016> lapd_core.c:232 ((0:1-T62-S62)) stop T203
|
1096
|
DLLAPD INFO <0016> lapd_core.c:208 ((0:1-T62-S62)) start T200 (timeout=0.300000s)
|
1097
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T62-S62)) TX: fa 7d 02 04 80 80 00 06 00 40 0a 00 ff 00
|
1098
|
DLLAPD INFO <0016> lapd_core.c:1861 ((0:1-T62-S62)) k frames outstanding, not sending more (k=1 V(S)=2 V(A)=1)
|
1099
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 4, sapi(62) tei(62)
|
1100
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: fa 7d 01 04
|
1101
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:1-T62-S62)) RR received in state LAPD_STATE_MF_EST
|
1102
|
DLLAPD INFO <0016> lapd_core.c:765 ((0:1-T62-S62)) ack frame 1
|
1103
|
DLLAPD INFO <0016> lapd_core.c:224 ((0:1-T62-S62)) stop T200
|
1104
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T62-S62)) start T203
|
1105
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T62-S62)) lapd_send_i() called from line 1373
|
1106
|
DLLAPD INFO <0016> lapd_core.c:1888 ((0:1-T62-S62)) msg-len 10 sent 10 left 0 N201 260 length 0 first byte 80
|
1107
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 69, sapi(62) tei(62)
|
1108
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: f8 7d 04 04 80 80 00 3d 01 06 0a 00 ff 00 90 35 02 04 00 47 31 32 52 31 30 47 31 32 52 31 31 47 31 32 52 31 32 47 31 32 52 31 33 04 01 47 30 31 52 31 32 47 30 31 52 31 33 47 30 31 52 31 34 47 30 31 52 31 35
|
1109
|
DLLAPD INFO <0016> lapd_core.c:1520 ((0:1-T62-S62)) I received in state LAPD_STATE_MF_EST on SAPI(62)
|
1110
|
DLLAPD INFO <0016> lapd_core.c:1606 ((0:1-T62-S62)) incrementing V(R) to 3
|
1111
|
DLLAPD INFO <0016> lapd_core.c:232 ((0:1-T62-S62)) stop T203
|
1112
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T62-S62)) start T203
|
1113
|
DLLAPD INFO <0016> lapd_core.c:1615 ((0:1-T62-S62)) message in single I frame
|
1114
|
DLMI DEBUG <0019> e1_input.c:752 E1TS(0:1) RX: 80 80 00 3d 01 06 0a 00 ff 00 90 35 02 04 00 47 31 32 52 31 30 47 31 32 52 31 31 47 31 32 52 31 32 47 31 32 52 31 33 04 01 47 30 31 52 31 32 47 30 31 52 31 33 47 30 31 52 31 34 47 30 31 52 31 35 sapi=62 tei=62
|
1115
|
DNM DEBUG <0004> abis_om2000.c:2914 Rx MO=CF/00/ff/00 Negotiation Request (80 80 00 3d 01 06 0a 00 ff 00 90 35 02 04 00 47 31 32 52 31 30 47 31 32 52 31 31 47 31 32 52 31 32 47 31 32 52 31 33 04 01 47 30 31 52 31 32 47 30 31 52 31 33 47 30 31 52 31 34 47 30 31 52 31 35 )
|
1116
|
DNM DEBUG <0004> abis_om2000.c:2639 IWD Type 0 Gen G12 Rev R10
|
1117
|
DNM DEBUG <0004> abis_om2000.c:2639 IWD Type 0 Gen G12 Rev R11
|
1118
|
DNM DEBUG <0004> abis_om2000.c:2639 IWD Type 0 Gen G12 Rev R12
|
1119
|
DNM DEBUG <0004> abis_om2000.c:2639 IWD Type 0 Gen G12 Rev R13
|
1120
|
DNM DEBUG <0004> abis_om2000.c:2639 IWD Type 1 Gen G01 Rev R12
|
1121
|
DNM DEBUG <0004> abis_om2000.c:2639 IWD Type 1 Gen G01 Rev R13
|
1122
|
DNM DEBUG <0004> abis_om2000.c:2639 IWD Type 1 Gen G01 Rev R14
|
1123
|
DNM DEBUG <0004> abis_om2000.c:2639 IWD Type 1 Gen G01 Rev R15
|
1124
|
DNM DEBUG <0004> abis_om2000.c:2591 Tx MO=CF/00/ff/00 Negotiation Request ACK
|
1125
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T62-S62)) lapd_send_i() called from line 1672
|
1126
|
DLLAPD INFO <0016> lapd_core.c:1681 ((0:1-T62-S62)) we are not busy and have no pending data, send RR
|
1127
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T62-S62)) TX: f8 7d 01 06
|
1128
|
DLMI ERROR <0019> input/dahdi.c:262 E1TS(0:1) TX: 80 80 00 17 01 04 0a 00 ff 00 91 0f 02 00 47 31 32 52 31 30 01 47 30 31 52 31 35
|
1129
|
DLLAPD INFO <0016> lapd_core.c:2233 ((0:1-T62-S62)) Message DL-DATA-REQUEST received in state LAPD_STATE_MF_EST
|
1130
|
DLLAPD INFO <0016> lapd_core.c:1816 ((0:1-T62-S62)) writing message to send-queue: l3len: 27
|
1131
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T62-S62)) lapd_send_i() called from line 1822
|
1132
|
DLLAPD INFO <0016> lapd_core.c:1877 ((0:1-T62-S62)) get message from send-queue
|
1133
|
DLLAPD INFO <0016> lapd_core.c:1888 ((0:1-T62-S62)) msg-len 27 sent 0 left 27 N201 260 length 27 first byte 80
|
1134
|
DLLAPD INFO <0016> lapd_core.c:1897 ((0:1-T62-S62)) send I frame V(S)=2
|
1135
|
DLLAPD INFO <0016> lapd_core.c:232 ((0:1-T62-S62)) stop T203
|
1136
|
DLLAPD INFO <0016> lapd_core.c:208 ((0:1-T62-S62)) start T200 (timeout=0.300000s)
|
1137
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T62-S62)) TX: fa 7d 04 06 80 80 00 17 01 04 0a 00 ff 00 91 0f 02 00 47 31 32 52 31 30 01 47 30 31 52 31 35
|
1138
|
DLLAPD INFO <0016> lapd_core.c:1861 ((0:1-T62-S62)) k frames outstanding, not sending more (k=1 V(S)=3 V(A)=2)
|
1139
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 4, sapi(62) tei(62)
|
1140
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: fa 7d 01 06
|
1141
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:1-T62-S62)) RR received in state LAPD_STATE_MF_EST
|
1142
|
DLLAPD INFO <0016> lapd_core.c:765 ((0:1-T62-S62)) ack frame 2
|
1143
|
DLLAPD INFO <0016> lapd_core.c:224 ((0:1-T62-S62)) stop T200
|
1144
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T62-S62)) start T203
|
1145
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T62-S62)) lapd_send_i() called from line 1373
|
1146
|
DLLAPD INFO <0016> lapd_core.c:1888 ((0:1-T62-S62)) msg-len 27 sent 27 left 0 N201 260 length 0 first byte 80
|
1147
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 50, sapi(62) tei(62)
|
1148
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: f8 7d 06 06 80 80 00 2a 00 8a 0a 00 ff 00 2c 01 48 00 40 45 52 41 47 30 37 52 33 32 56 30 31 43 04 fe ff fe 74 44 01 ff 45 05 ff fb ff ff 07 46 01 ff
|
1149
|
DLLAPD INFO <0016> lapd_core.c:1520 ((0:1-T62-S62)) I received in state LAPD_STATE_MF_EST on SAPI(62)
|
1150
|
DLLAPD INFO <0016> lapd_core.c:1606 ((0:1-T62-S62)) incrementing V(R) to 4
|
1151
|
DLLAPD INFO <0016> lapd_core.c:232 ((0:1-T62-S62)) stop T203
|
1152
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T62-S62)) start T203
|
1153
|
DLLAPD INFO <0016> lapd_core.c:1615 ((0:1-T62-S62)) message in single I frame
|
1154
|
DLMI DEBUG <0019> e1_input.c:752 E1TS(0:1) RX: 80 80 00 2a 00 8a 0a 00 ff 00 2c 01 48 00 40 45 52 41 47 30 37 52 33 32 56 30 31 43 04 fe ff fe 74 44 01 ff 45 05 ff fb ff ff 07 46 01 ff sapi=62 tei=62
|
1155
|
DNM DEBUG <0004> abis_om2000.c:2914 Rx MO=CF/00/ff/00 Start Result (80 80 00 2a 00 8a 0a 00 ff 00 2c 01 48 00 40 45 52 41 47 30 37 52 33 32 56 30 31 43 04 fe ff fe 74 44 01 ff 45 05 ff fb ff ff 07 46 01 ff )
|
1156
|
DNM DEBUG <0004> abis_om2000.c:2740 Rx MO=CF/00/ff/00 Start Result, MO State: STARTED
|
1157
|
DNM DEBUG <0004> abis_om2000.c:1115 Tx MO=CF/00/ff/00 Start Result ACK
|
1158
|
DNM DEBUG <0004> abis_om2000.c:2049 OM2000-MO(0-CF-00-ff-00)[0x556b66656550]{WAIT-START-RES}: Received Event RX-START-RESULT
|
1159
|
DNM DEBUG <0004> abis_om2000.c:1753 OM2000-MO(0-CF-00-ff-00)[0x556b66656550]{WAIT-START-RES}: state_chg to WAIT-OPINFO-ACCEPT
|
1160
|
DNM DEBUG <0004> abis_om2000.c:1172 Tx MO=CF/00/ff/00 Operational Information
|
1161
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T62-S62)) lapd_send_i() called from line 1672
|
1162
|
DLLAPD INFO <0016> lapd_core.c:1681 ((0:1-T62-S62)) we are not busy and have no pending data, send RR
|
1163
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T62-S62)) TX: f8 7d 01 08
|
1164
|
DLMI ERROR <0019> input/dahdi.c:262 E1TS(0:1) TX: 80 80 00 06 00 88 0a 00 ff 00
|
1165
|
DLLAPD INFO <0016> lapd_core.c:2233 ((0:1-T62-S62)) Message DL-DATA-REQUEST received in state LAPD_STATE_MF_EST
|
1166
|
DLLAPD INFO <0016> lapd_core.c:1816 ((0:1-T62-S62)) writing message to send-queue: l3len: 10
|
1167
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T62-S62)) lapd_send_i() called from line 1822
|
1168
|
DLLAPD INFO <0016> lapd_core.c:1877 ((0:1-T62-S62)) get message from send-queue
|
1169
|
DLLAPD INFO <0016> lapd_core.c:1888 ((0:1-T62-S62)) msg-len 10 sent 0 left 10 N201 260 length 10 first byte 80
|
1170
|
DLLAPD INFO <0016> lapd_core.c:1897 ((0:1-T62-S62)) send I frame V(S)=3
|
1171
|
DLLAPD INFO <0016> lapd_core.c:232 ((0:1-T62-S62)) stop T203
|
1172
|
DLLAPD INFO <0016> lapd_core.c:208 ((0:1-T62-S62)) start T200 (timeout=0.300000s)
|
1173
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T62-S62)) TX: fa 7d 06 08 80 80 00 06 00 88 0a 00 ff 00
|
1174
|
DLLAPD INFO <0016> lapd_core.c:1861 ((0:1-T62-S62)) k frames outstanding, not sending more (k=1 V(S)=4 V(A)=3)
|
1175
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 4, sapi(62) tei(62)
|
1176
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: fa 7d 01 08
|
1177
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:1-T62-S62)) RR received in state LAPD_STATE_MF_EST
|
1178
|
DLLAPD INFO <0016> lapd_core.c:765 ((0:1-T62-S62)) ack frame 3
|
1179
|
DLLAPD INFO <0016> lapd_core.c:224 ((0:1-T62-S62)) stop T200
|
1180
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T62-S62)) start T203
|
1181
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T62-S62)) lapd_send_i() called from line 1373
|
1182
|
DLLAPD INFO <0016> lapd_core.c:1888 ((0:1-T62-S62)) msg-len 10 sent 10 left 0 N201 260 length 0 first byte 80
|
1183
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 76, sapi(62) tei(62)
|
1184
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: f8 7d 08 08 80 80 00 44 00 42 0a 00 ff 00 23 00 00 00 00 00 00 24 00 00 00 00 00 00 25 00 00 00 02 00 08 14 00 00 15 40 00 34 81 00 00 00 04 00 2c 01 2a 00 26 20 04 20 00 00 02 50 00 20 00 00 00 00 b9 00 00 d2 00 00 00 00 00 00
|
1185
|
DLLAPD INFO <0016> lapd_core.c:1520 ((0:1-T62-S62)) I received in state LAPD_STATE_MF_EST on SAPI(62)
|
1186
|
DLLAPD INFO <0016> lapd_core.c:1606 ((0:1-T62-S62)) incrementing V(R) to 5
|
1187
|
DLLAPD INFO <0016> lapd_core.c:232 ((0:1-T62-S62)) stop T203
|
1188
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T62-S62)) start T203
|
1189
|
DLLAPD INFO <0016> lapd_core.c:1615 ((0:1-T62-S62)) message in single I frame
|
1190
|
DLMI DEBUG <0019> e1_input.c:752 E1TS(0:1) RX: 80 80 00 44 00 42 0a 00 ff 00 23 00 00 00 00 00 00 24 00 00 00 00 00 00 25 00 00 00 02 00 08 14 00 00 15 40 00 34 81 00 00 00 04 00 2c 01 2a 00 26 20 04 20 00 00 02 50 00 20 00 00 00 00 b9 00 00 d2 00 00 00 00 00 00 sapi=62 tei=62
|
1191
|
DNM DEBUG <0004> abis_om2000.c:2914 Rx MO=CF/00/ff/00 Fault Report (80 80 00 44 00 42 0a 00 ff 00 23 00 00 00 00 00 00 24 00 00 00 00 00 00 25 00 00 00 02 00 08 14 00 00 15 40 00 34 81 00 00 00 04 00 2c 01 2a 00 26 20 04 20 00 00 02 50 00 20 00 00 00 00 b9 00 00 d2 00 00 00 00 00 00 )
|
1192
|
DNM DEBUG <0004> abis_om2000.c:2740 Rx MO=CF/00/ff/00 Fault Report, MO State: STARTED
|
1193
|
DNM DEBUG <0004> abis_om2000.c:2789 Rx MO=CF/00/ff/00 Fault Report: Internal Fault Map Class 2A (25,43)
|
1194
|
DNM DEBUG <0004> abis_om2000.c:2789 Rx MO=CF/00/ff/00 Fault Report: External Condition Map Class 2 (6)
|
1195
|
DNM DEBUG <0004> abis_om2000.c:2789 Rx MO=CF/00/ff/00 Fault Report: Replacement Unit Map (0,7,34)
|
1196
|
DNM DEBUG <0004> abis_om2000.c:2789 Rx MO=CF/00/ff/00 Fault Report: Internal Fault Map Class 2A Extension (5,10,21,41)
|
1197
|
DNM DEBUG <0004> abis_om2000.c:2789 Rx MO=CF/00/ff/00 Fault Report: Replacement Unit Map Extension (13)
|
1198
|
DNM ERROR <0004> abis_om2000.c:2848 Rx MO=CF/00/ff/00 Fault Report: invalid tlv element!
|
1199
|
DNM DEBUG <0004> abis_om2000.c:1115 Tx MO=CF/00/ff/00 Fault Report ACK
|
1200
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T62-S62)) lapd_send_i() called from line 1672
|
1201
|
DLLAPD INFO <0016> lapd_core.c:1681 ((0:1-T62-S62)) we are not busy and have no pending data, send RR
|
1202
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T62-S62)) TX: f8 7d 01 0a
|
1203
|
DLMI ERROR <0019> input/dahdi.c:262 E1TS(0:1) TX: 80 80 00 08 00 74 0a 00 ff 00 2e 01
|
1204
|
DLLAPD INFO <0016> lapd_core.c:2233 ((0:1-T62-S62)) Message DL-DATA-REQUEST received in state LAPD_STATE_MF_EST
|
1205
|
DLLAPD INFO <0016> lapd_core.c:1816 ((0:1-T62-S62)) writing message to send-queue: l3len: 12
|
1206
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T62-S62)) lapd_send_i() called from line 1822
|
1207
|
DLLAPD INFO <0016> lapd_core.c:1877 ((0:1-T62-S62)) get message from send-queue
|
1208
|
DLLAPD INFO <0016> lapd_core.c:1888 ((0:1-T62-S62)) msg-len 12 sent 0 left 12 N201 260 length 12 first byte 80
|
1209
|
DLLAPD INFO <0016> lapd_core.c:1897 ((0:1-T62-S62)) send I frame V(S)=4
|
1210
|
DLLAPD INFO <0016> lapd_core.c:232 ((0:1-T62-S62)) stop T203
|
1211
|
DLLAPD INFO <0016> lapd_core.c:208 ((0:1-T62-S62)) start T200 (timeout=0.300000s)
|
1212
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T62-S62)) TX: fa 7d 08 0a 80 80 00 08 00 74 0a 00 ff 00 2e 01
|
1213
|
DLLAPD INFO <0016> lapd_core.c:1861 ((0:1-T62-S62)) k frames outstanding, not sending more (k=1 V(S)=5 V(A)=4)
|
1214
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 4, sapi(62) tei(62)
|
1215
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: fa 7d 01 0a
|
1216
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:1-T62-S62)) RR received in state LAPD_STATE_MF_EST
|
1217
|
DLLAPD INFO <0016> lapd_core.c:765 ((0:1-T62-S62)) ack frame 4
|
1218
|
DLLAPD INFO <0016> lapd_core.c:224 ((0:1-T62-S62)) stop T200
|
1219
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T62-S62)) start T203
|
1220
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T62-S62)) lapd_send_i() called from line 1373
|
1221
|
DLLAPD INFO <0016> lapd_core.c:1888 ((0:1-T62-S62)) msg-len 12 sent 12 left 0 N201 260 length 0 first byte 80
|
1222
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 14, sapi(62) tei(62)
|
1223
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: f8 7d 0a 0a 80 80 00 06 00 76 0a 00 ff 00
|
1224
|
DLLAPD INFO <0016> lapd_core.c:1520 ((0:1-T62-S62)) I received in state LAPD_STATE_MF_EST on SAPI(62)
|
1225
|
DLLAPD INFO <0016> lapd_core.c:1606 ((0:1-T62-S62)) incrementing V(R) to 6
|
1226
|
DLLAPD INFO <0016> lapd_core.c:232 ((0:1-T62-S62)) stop T203
|
1227
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T62-S62)) start T203
|
1228
|
DLLAPD INFO <0016> lapd_core.c:1615 ((0:1-T62-S62)) message in single I frame
|
1229
|
DLMI DEBUG <0019> e1_input.c:752 E1TS(0:1) RX: 80 80 00 06 00 76 0a 00 ff 00 sapi=62 tei=62
|
1230
|
DNM DEBUG <0004> abis_om2000.c:2914 Rx MO=CF/00/ff/00 Operational Information Accept (80 80 00 06 00 76 0a 00 ff 00 )
|
1231
|
DNM DEBUG <0004> abis_om2000.c:2087 OM2000-MO(0-CF-00-ff-00)[0x556b66656550]{WAIT-OPINFO-ACCEPT}: Received Event RX-OPINFO-ACCEPT
|
1232
|
DNM DEBUG <0004> abis_om2000.c:1865 OM2000-MO(0-CF-00-ff-00)[0x556b66656550]{WAIT-OPINFO-ACCEPT}: state_chg to DONE
|
1233
|
DNM DEBUG <0004> abis_om2000.c:1872 OM2000-MO(0-CF-00-ff-00)[0x556b66656550]{DONE}: Terminating (cause = OSMO_FSM_TERM_REGULAR)
|
1234
|
DNM DEBUG <0004> abis_om2000.c:1872 OM2000-MO(0-CF-00-ff-00)[0x556b66656550]{DONE}: Removing from parent OM2000-BTS(0)[0x556b6667de60]
|
1235
|
DNM DEBUG <0004> abis_om2000.c:1872 OM2000-MO(0-CF-00-ff-00)[0x556b66656550]{DONE}: Freeing instance
|
1236
|
DNM DEBUG <0004> fsm.c:573 OM2000-MO(0-CF-00-ff-00)[0x556b66656550]{DONE}: Deallocated
|
1237
|
DNM DEBUG <0004> abis_om2000.c:1872 OM2000-BTS(0)[0x556b6667de60]{WAIT-CF}: Received Event CF-DONE
|
1238
|
DNM DEBUG <0004> abis_om2000.c:2374 OM2000-BTS(0)[0x556b6667de60]{WAIT-CF}: state_chg to WAIT-TF
|
1239
|
DNM DEBUG <0004> fsm.c:461 OM2000-MO(0-TF-00-ff-00)[0x556b66682360]{INIT}: Allocated
|
1240
|
DNM DEBUG <0004> abis_om2000.c:66 OM2000-MO(0-TF-00-ff-00)[0x556b66682360]{INIT}: is child of OM2000-BTS(0)[0x556b6667de60]
|
1241
|
DNM DEBUG <0004> abis_om2000.c:2020 OM2000-MO(0-TF-00-ff-00)[0x556b66682360]{INIT}: Received Event START
|
1242
|
DNM DEBUG <0004> abis_om2000.c:1692 OM2000-MO(0-TF-00-ff-00)[0x556b66682360]{INIT}: state_chg to WAIT-CONN-COMPL
|
1243
|
DNM DEBUG <0004> abis_om2000.c:1115 Tx MO=TF/00/ff/00 Connect Command
|
1244
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T62-S62)) lapd_send_i() called from line 1672
|
1245
|
DLLAPD INFO <0016> lapd_core.c:1681 ((0:1-T62-S62)) we are not busy and have no pending data, send RR
|
1246
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T62-S62)) TX: f8 7d 01 0c
|
1247
|
DLMI ERROR <0019> input/dahdi.c:262 E1TS(0:1) TX: 80 80 00 06 00 40 0a 00 ff 00
|
1248
|
DLLAPD INFO <0016> lapd_core.c:2233 ((0:1-T62-S62)) Message DL-DATA-REQUEST received in state LAPD_STATE_MF_EST
|
1249
|
DLLAPD INFO <0016> lapd_core.c:1816 ((0:1-T62-S62)) writing message to send-queue: l3len: 10
|
1250
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T62-S62)) lapd_send_i() called from line 1822
|
1251
|
DLLAPD INFO <0016> lapd_core.c:1877 ((0:1-T62-S62)) get message from send-queue
|
1252
|
DLLAPD INFO <0016> lapd_core.c:1888 ((0:1-T62-S62)) msg-len 10 sent 0 left 10 N201 260 length 10 first byte 80
|
1253
|
DLLAPD INFO <0016> lapd_core.c:1897 ((0:1-T62-S62)) send I frame V(S)=5
|
1254
|
DLLAPD INFO <0016> lapd_core.c:232 ((0:1-T62-S62)) stop T203
|
1255
|
DLLAPD INFO <0016> lapd_core.c:208 ((0:1-T62-S62)) start T200 (timeout=0.300000s)
|
1256
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T62-S62)) TX: fa 7d 0a 0c 80 80 00 06 00 40 0a 00 ff 00
|
1257
|
DLLAPD INFO <0016> lapd_core.c:1861 ((0:1-T62-S62)) k frames outstanding, not sending more (k=1 V(S)=6 V(A)=5)
|
1258
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 4, sapi(62) tei(62)
|
1259
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: fa 7d 01 0c
|
1260
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:1-T62-S62)) RR received in state LAPD_STATE_MF_EST
|
1261
|
DLLAPD INFO <0016> lapd_core.c:765 ((0:1-T62-S62)) ack frame 5
|
1262
|
DLLAPD INFO <0016> lapd_core.c:224 ((0:1-T62-S62)) stop T200
|
1263
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T62-S62)) start T203
|
1264
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T62-S62)) lapd_send_i() called from line 1373
|
1265
|
DLLAPD INFO <0016> lapd_core.c:1888 ((0:1-T62-S62)) msg-len 10 sent 10 left 0 N201 260 length 0 first byte 80
|
1266
|
DLMI ERROR <0019> input/dahdi.c:262 E1TS(0:1) TX: 80 80 00 06 00 1c 04 00 ff 00
|
1267
|
DLLAPD INFO <0016> lapd_core.c:2233 ((0:1-T62-S62)) Message DL-DATA-REQUEST received in state LAPD_STATE_MF_EST
|
1268
|
DLLAPD INFO <0016> lapd_core.c:1816 ((0:1-T62-S62)) writing message to send-queue: l3len: 10
|
1269
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T62-S62)) lapd_send_i() called from line 1822
|
1270
|
DLLAPD INFO <0016> lapd_core.c:1877 ((0:1-T62-S62)) get message from send-queue
|
1271
|
DLLAPD INFO <0016> lapd_core.c:1888 ((0:1-T62-S62)) msg-len 10 sent 0 left 10 N201 260 length 10 first byte 80
|
1272
|
DLLAPD INFO <0016> lapd_core.c:1897 ((0:1-T62-S62)) send I frame V(S)=6
|
1273
|
DLLAPD INFO <0016> lapd_core.c:232 ((0:1-T62-S62)) stop T203
|
1274
|
DLLAPD INFO <0016> lapd_core.c:208 ((0:1-T62-S62)) start T200 (timeout=0.300000s)
|
1275
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T62-S62)) TX: fa 7d 0c 0c 80 80 00 06 00 1c 04 00 ff 00
|
1276
|
DLLAPD INFO <0016> lapd_core.c:1861 ((0:1-T62-S62)) k frames outstanding, not sending more (k=1 V(S)=7 V(A)=6)
|
1277
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 4, sapi(62) tei(62)
|
1278
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: fa 7d 01 0e
|
1279
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:1-T62-S62)) RR received in state LAPD_STATE_MF_EST
|
1280
|
DLLAPD INFO <0016> lapd_core.c:765 ((0:1-T62-S62)) ack frame 6
|
1281
|
DLLAPD INFO <0016> lapd_core.c:224 ((0:1-T62-S62)) stop T200
|
1282
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T62-S62)) start T203
|
1283
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T62-S62)) lapd_send_i() called from line 1373
|
1284
|
DLLAPD INFO <0016> lapd_core.c:1888 ((0:1-T62-S62)) msg-len 10 sent 10 left 0 N201 260 length 0 first byte 80
|
1285
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 14, sapi(62) tei(62)
|
1286
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: f8 7d 0c 0e 80 80 00 06 00 1e 04 00 ff 00
|
1287
|
DLLAPD INFO <0016> lapd_core.c:1520 ((0:1-T62-S62)) I received in state LAPD_STATE_MF_EST on SAPI(62)
|
1288
|
DLLAPD INFO <0016> lapd_core.c:1606 ((0:1-T62-S62)) incrementing V(R) to 7
|
1289
|
DLLAPD INFO <0016> lapd_core.c:232 ((0:1-T62-S62)) stop T203
|
1290
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T62-S62)) start T203
|
1291
|
DLLAPD INFO <0016> lapd_core.c:1615 ((0:1-T62-S62)) message in single I frame
|
1292
|
DLMI DEBUG <0019> e1_input.c:752 E1TS(0:1) RX: 80 80 00 06 00 1e 04 00 ff 00 sapi=62 tei=62
|
1293
|
DNM DEBUG <0004> abis_om2000.c:2914 Rx MO=TF/00/ff/00 Connect Complete (80 80 00 06 00 1e 04 00 ff 00 )
|
1294
|
DNM DEBUG <0004> abis_om2000.c:2032 OM2000-MO(0-TF-00-ff-00)[0x556b66682360]{WAIT-CONN-COMPL}: Received Event RX-CONN-COMPL
|
1295
|
DNM DEBUG <0004> abis_om2000.c:1713 OM2000-MO(0-TF-00-ff-00)[0x556b66682360]{WAIT-CONN-COMPL}: state_chg to WAIT-RES-COMPL
|
1296
|
DNM DEBUG <0004> abis_om2000.c:1115 Tx MO=TF/00/ff/00 Reset Command
|
1297
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T62-S62)) lapd_send_i() called from line 1672
|
1298
|
DLLAPD INFO <0016> lapd_core.c:1681 ((0:1-T62-S62)) we are not busy and have no pending data, send RR
|
1299
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T62-S62)) TX: f8 7d 01 0e
|
1300
|
DLMI ERROR <0019> input/dahdi.c:262 E1TS(0:1) TX: 80 80 00 06 00 78 04 00 ff 00
|
1301
|
DLLAPD INFO <0016> lapd_core.c:2233 ((0:1-T62-S62)) Message DL-DATA-REQUEST received in state LAPD_STATE_MF_EST
|
1302
|
DLLAPD INFO <0016> lapd_core.c:1816 ((0:1-T62-S62)) writing message to send-queue: l3len: 10
|
1303
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T62-S62)) lapd_send_i() called from line 1822
|
1304
|
DLLAPD INFO <0016> lapd_core.c:1877 ((0:1-T62-S62)) get message from send-queue
|
1305
|
DLLAPD INFO <0016> lapd_core.c:1888 ((0:1-T62-S62)) msg-len 10 sent 0 left 10 N201 260 length 10 first byte 80
|
1306
|
DLLAPD INFO <0016> lapd_core.c:1897 ((0:1-T62-S62)) send I frame V(S)=7
|
1307
|
DLLAPD INFO <0016> lapd_core.c:232 ((0:1-T62-S62)) stop T203
|
1308
|
DLLAPD INFO <0016> lapd_core.c:208 ((0:1-T62-S62)) start T200 (timeout=0.300000s)
|
1309
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T62-S62)) TX: fa 7d 0e 0e 80 80 00 06 00 78 04 00 ff 00
|
1310
|
DLLAPD INFO <0016> lapd_core.c:1861 ((0:1-T62-S62)) k frames outstanding, not sending more (k=1 V(S)=8 V(A)=7)
|
1311
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 4, sapi(62) tei(62)
|
1312
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: fa 7d 01 10
|
1313
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:1-T62-S62)) RR received in state LAPD_STATE_MF_EST
|
1314
|
DLLAPD INFO <0016> lapd_core.c:765 ((0:1-T62-S62)) ack frame 7
|
1315
|
DLLAPD INFO <0016> lapd_core.c:224 ((0:1-T62-S62)) stop T200
|
1316
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T62-S62)) start T203
|
1317
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T62-S62)) lapd_send_i() called from line 1373
|
1318
|
DLLAPD INFO <0016> lapd_core.c:1888 ((0:1-T62-S62)) msg-len 10 sent 10 left 0 N201 260 length 0 first byte 80
|
1319
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 14, sapi(62) tei(62)
|
1320
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: f8 7d 0e 10 80 80 00 06 00 7a 04 00 ff 00
|
1321
|
DLLAPD INFO <0016> lapd_core.c:1520 ((0:1-T62-S62)) I received in state LAPD_STATE_MF_EST on SAPI(62)
|
1322
|
DLLAPD INFO <0016> lapd_core.c:1606 ((0:1-T62-S62)) incrementing V(R) to 8
|
1323
|
DLLAPD INFO <0016> lapd_core.c:232 ((0:1-T62-S62)) stop T203
|
1324
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T62-S62)) start T203
|
1325
|
DLLAPD INFO <0016> lapd_core.c:1615 ((0:1-T62-S62)) message in single I frame
|
1326
|
DLMI DEBUG <0019> e1_input.c:752 E1TS(0:1) RX: 80 80 00 06 00 7a 04 00 ff 00 sapi=62 tei=62
|
1327
|
DNM DEBUG <0004> abis_om2000.c:2914 Rx MO=TF/00/ff/00 Reset Complete (80 80 00 06 00 7a 04 00 ff 00 )
|
1328
|
DNM DEBUG <0004> abis_om2000.c:2038 OM2000-MO(0-TF-00-ff-00)[0x556b66682360]{WAIT-RES-COMPL}: Received Event RX-RESET-COMPL
|
1329
|
DNM DEBUG <0004> abis_om2000.c:1724 OM2000-MO(0-TF-00-ff-00)[0x556b66682360]{WAIT-RES-COMPL}: state_chg to WAIT-START-ACCEPT
|
1330
|
DNM DEBUG <0004> abis_om2000.c:1115 Tx MO=TF/00/ff/00 Start Request
|
1331
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T62-S62)) lapd_send_i() called from line 1672
|
1332
|
DLLAPD INFO <0016> lapd_core.c:1681 ((0:1-T62-S62)) we are not busy and have no pending data, send RR
|
1333
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T62-S62)) TX: f8 7d 01 10
|
1334
|
DLMI ERROR <0019> input/dahdi.c:262 E1TS(0:1) TX: 80 80 00 06 00 84 04 00 ff 00
|
1335
|
DLLAPD INFO <0016> lapd_core.c:2233 ((0:1-T62-S62)) Message DL-DATA-REQUEST received in state LAPD_STATE_MF_EST
|
1336
|
DLLAPD INFO <0016> lapd_core.c:1816 ((0:1-T62-S62)) writing message to send-queue: l3len: 10
|
1337
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T62-S62)) lapd_send_i() called from line 1822
|
1338
|
DLLAPD INFO <0016> lapd_core.c:1877 ((0:1-T62-S62)) get message from send-queue
|
1339
|
DLLAPD INFO <0016> lapd_core.c:1888 ((0:1-T62-S62)) msg-len 10 sent 0 left 10 N201 260 length 10 first byte 80
|
1340
|
DLLAPD INFO <0016> lapd_core.c:1897 ((0:1-T62-S62)) send I frame V(S)=8
|
1341
|
DLLAPD INFO <0016> lapd_core.c:232 ((0:1-T62-S62)) stop T203
|
1342
|
DLLAPD INFO <0016> lapd_core.c:208 ((0:1-T62-S62)) start T200 (timeout=0.300000s)
|
1343
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T62-S62)) TX: fa 7d 10 10 80 80 00 06 00 84 04 00 ff 00
|
1344
|
DLLAPD INFO <0016> lapd_core.c:1861 ((0:1-T62-S62)) k frames outstanding, not sending more (k=1 V(S)=9 V(A)=8)
|
1345
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 4, sapi(62) tei(62)
|
1346
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: fa 7d 01 12
|
1347
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:1-T62-S62)) RR received in state LAPD_STATE_MF_EST
|
1348
|
DLLAPD INFO <0016> lapd_core.c:765 ((0:1-T62-S62)) ack frame 8
|
1349
|
DLLAPD INFO <0016> lapd_core.c:224 ((0:1-T62-S62)) stop T200
|
1350
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T62-S62)) start T203
|
1351
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T62-S62)) lapd_send_i() called from line 1373
|
1352
|
DLLAPD INFO <0016> lapd_core.c:1888 ((0:1-T62-S62)) msg-len 10 sent 10 left 0 N201 260 length 0 first byte 80
|
1353
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 14, sapi(62) tei(62)
|
1354
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: f8 7d 10 12 80 80 00 06 00 86 04 00 ff 00
|
1355
|
DLLAPD INFO <0016> lapd_core.c:1520 ((0:1-T62-S62)) I received in state LAPD_STATE_MF_EST on SAPI(62)
|
1356
|
DLLAPD INFO <0016> lapd_core.c:1606 ((0:1-T62-S62)) incrementing V(R) to 9
|
1357
|
DLLAPD INFO <0016> lapd_core.c:232 ((0:1-T62-S62)) stop T203
|
1358
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T62-S62)) start T203
|
1359
|
DLLAPD INFO <0016> lapd_core.c:1615 ((0:1-T62-S62)) message in single I frame
|
1360
|
DLMI DEBUG <0019> e1_input.c:752 E1TS(0:1) RX: 80 80 00 06 00 86 04 00 ff 00 sapi=62 tei=62
|
1361
|
DNM DEBUG <0004> abis_om2000.c:2914 Rx MO=TF/00/ff/00 Start Request Accept (80 80 00 06 00 86 04 00 ff 00 )
|
1362
|
DNM DEBUG <0004> abis_om2000.c:2044 OM2000-MO(0-TF-00-ff-00)[0x556b66682360]{WAIT-START-ACCEPT}: Received Event RX-RESET-REQ-ACCEPT
|
1363
|
DNM DEBUG <0004> abis_om2000.c:1735 OM2000-MO(0-TF-00-ff-00)[0x556b66682360]{WAIT-START-ACCEPT}: state_chg to WAIT-START-RES
|
1364
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T62-S62)) lapd_send_i() called from line 1672
|
1365
|
DLLAPD INFO <0016> lapd_core.c:1681 ((0:1-T62-S62)) we are not busy and have no pending data, send RR
|
1366
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T62-S62)) TX: f8 7d 01 12
|
1367
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 16, sapi(62) tei(62)
|
1368
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: f8 7d 12 12 80 80 00 08 00 8a 04 00 ff 00 2c 03
|
1369
|
DLLAPD INFO <0016> lapd_core.c:1520 ((0:1-T62-S62)) I received in state LAPD_STATE_MF_EST on SAPI(62)
|
1370
|
DLLAPD INFO <0016> lapd_core.c:1606 ((0:1-T62-S62)) incrementing V(R) to 10
|
1371
|
DLLAPD INFO <0016> lapd_core.c:232 ((0:1-T62-S62)) stop T203
|
1372
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T62-S62)) start T203
|
1373
|
DLLAPD INFO <0016> lapd_core.c:1615 ((0:1-T62-S62)) message in single I frame
|
1374
|
DLMI DEBUG <0019> e1_input.c:752 E1TS(0:1) RX: 80 80 00 08 00 8a 04 00 ff 00 2c 03 sapi=62 tei=62
|
1375
|
DNM DEBUG <0004> abis_om2000.c:2914 Rx MO=TF/00/ff/00 Start Result (80 80 00 08 00 8a 04 00 ff 00 2c 03 )
|
1376
|
DNM DEBUG <0004> abis_om2000.c:2740 Rx MO=TF/00/ff/00 Start Result, MO State: DISABLED
|
1377
|
DNM DEBUG <0004> abis_om2000.c:1115 Tx MO=TF/00/ff/00 Start Result ACK
|
1378
|
DNM DEBUG <0004> abis_om2000.c:2049 OM2000-MO(0-TF-00-ff-00)[0x556b66682360]{WAIT-START-RES}: Received Event RX-START-RESULT
|
1379
|
DNM DEBUG <0004> abis_om2000.c:1773 OM2000-MO(0-TF-00-ff-00)[0x556b66682360]{WAIT-START-RES}: state_chg to WAIT-CFG-ACCEPT
|
1380
|
DNM DEBUG <0004> abis_om2000.c:1413 Tx MO=TF/00/ff/00 TF Configuration Request
|
1381
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T62-S62)) lapd_send_i() called from line 1672
|
1382
|
DLLAPD INFO <0016> lapd_core.c:1681 ((0:1-T62-S62)) we are not busy and have no pending data, send RR
|
1383
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T62-S62)) TX: f8 7d 01 14
|
1384
|
DLMI ERROR <0019> input/dahdi.c:262 E1TS(0:1) TX: 80 80 00 06 00 88 04 00 ff 00
|
1385
|
DLLAPD INFO <0016> lapd_core.c:2233 ((0:1-T62-S62)) Message DL-DATA-REQUEST received in state LAPD_STATE_MF_EST
|
1386
|
DLLAPD INFO <0016> lapd_core.c:1816 ((0:1-T62-S62)) writing message to send-queue: l3len: 10
|
1387
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T62-S62)) lapd_send_i() called from line 1822
|
1388
|
DLLAPD INFO <0016> lapd_core.c:1877 ((0:1-T62-S62)) get message from send-queue
|
1389
|
DLLAPD INFO <0016> lapd_core.c:1888 ((0:1-T62-S62)) msg-len 10 sent 0 left 10 N201 260 length 10 first byte 80
|
1390
|
DLLAPD INFO <0016> lapd_core.c:1897 ((0:1-T62-S62)) send I frame V(S)=9
|
1391
|
DLLAPD INFO <0016> lapd_core.c:232 ((0:1-T62-S62)) stop T203
|
1392
|
DLLAPD INFO <0016> lapd_core.c:208 ((0:1-T62-S62)) start T200 (timeout=0.300000s)
|
1393
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T62-S62)) TX: fa 7d 12 14 80 80 00 06 00 88 04 00 ff 00
|
1394
|
DLLAPD INFO <0016> lapd_core.c:1861 ((0:1-T62-S62)) k frames outstanding, not sending more (k=1 V(S)=10 V(A)=9)
|
1395
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 4, sapi(62) tei(62)
|
1396
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: fa 7d 01 14
|
1397
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:1-T62-S62)) RR received in state LAPD_STATE_MF_EST
|
1398
|
DLLAPD INFO <0016> lapd_core.c:765 ((0:1-T62-S62)) ack frame 9
|
1399
|
DLLAPD INFO <0016> lapd_core.c:224 ((0:1-T62-S62)) stop T200
|
1400
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T62-S62)) start T203
|
1401
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T62-S62)) lapd_send_i() called from line 1373
|
1402
|
DLLAPD INFO <0016> lapd_core.c:1888 ((0:1-T62-S62)) msg-len 10 sent 10 left 0 N201 260 length 0 first byte 80
|
1403
|
DLMI ERROR <0019> input/dahdi.c:262 E1TS(0:1) TX: 80 80 00 10 00 a0 04 00 ff 00 3a 01 86 00 98 ff ff ff ff ff
|
1404
|
DLLAPD INFO <0016> lapd_core.c:2233 ((0:1-T62-S62)) Message DL-DATA-REQUEST received in state LAPD_STATE_MF_EST
|
1405
|
DLLAPD INFO <0016> lapd_core.c:1816 ((0:1-T62-S62)) writing message to send-queue: l3len: 20
|
1406
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T62-S62)) lapd_send_i() called from line 1822
|
1407
|
DLLAPD INFO <0016> lapd_core.c:1877 ((0:1-T62-S62)) get message from send-queue
|
1408
|
DLLAPD INFO <0016> lapd_core.c:1888 ((0:1-T62-S62)) msg-len 20 sent 0 left 20 N201 260 length 20 first byte 80
|
1409
|
DLLAPD INFO <0016> lapd_core.c:1897 ((0:1-T62-S62)) send I frame V(S)=10
|
1410
|
DLLAPD INFO <0016> lapd_core.c:232 ((0:1-T62-S62)) stop T203
|
1411
|
DLLAPD INFO <0016> lapd_core.c:208 ((0:1-T62-S62)) start T200 (timeout=0.300000s)
|
1412
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T62-S62)) TX: fa 7d 14 14 80 80 00 10 00 a0 04 00 ff 00 3a 01 86 00 98 ff ff ff ff ff
|
1413
|
DLLAPD INFO <0016> lapd_core.c:1861 ((0:1-T62-S62)) k frames outstanding, not sending more (k=1 V(S)=11 V(A)=10)
|
1414
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 4, sapi(62) tei(62)
|
1415
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: fa 7d 01 16
|
1416
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:1-T62-S62)) RR received in state LAPD_STATE_MF_EST
|
1417
|
DLLAPD INFO <0016> lapd_core.c:765 ((0:1-T62-S62)) ack frame 10
|
1418
|
DLLAPD INFO <0016> lapd_core.c:224 ((0:1-T62-S62)) stop T200
|
1419
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T62-S62)) start T203
|
1420
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T62-S62)) lapd_send_i() called from line 1373
|
1421
|
DLLAPD INFO <0016> lapd_core.c:1888 ((0:1-T62-S62)) msg-len 20 sent 20 left 0 N201 260 length 0 first byte 80
|
1422
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 14, sapi(62) tei(62)
|
1423
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: f8 7d 14 16 80 80 00 06 00 a2 04 00 ff 00
|
1424
|
DLLAPD INFO <0016> lapd_core.c:1520 ((0:1-T62-S62)) I received in state LAPD_STATE_MF_EST on SAPI(62)
|
1425
|
DLLAPD INFO <0016> lapd_core.c:1606 ((0:1-T62-S62)) incrementing V(R) to 11
|
1426
|
DLLAPD INFO <0016> lapd_core.c:232 ((0:1-T62-S62)) stop T203
|
1427
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T62-S62)) start T203
|
1428
|
DLLAPD INFO <0016> lapd_core.c:1615 ((0:1-T62-S62)) message in single I frame
|
1429
|
DLMI DEBUG <0019> e1_input.c:752 E1TS(0:1) RX: 80 80 00 06 00 a2 04 00 ff 00 sapi=62 tei=62
|
1430
|
DNM DEBUG <0004> abis_om2000.c:2914 Rx MO=TF/00/ff/00 TF Configuration Request Accept (80 80 00 06 00 a2 04 00 ff 00 )
|
1431
|
DNM DEBUG <0004> abis_om2000.c:2060 OM2000-MO(0-TF-00-ff-00)[0x556b66682360]{WAIT-CFG-ACCEPT}: Received Event RX-CFG-REQ-ACCEPT
|
1432
|
DNM DEBUG <0004> abis_om2000.c:1808 OM2000-MO(0-TF-00-ff-00)[0x556b66682360]{WAIT-CFG-ACCEPT}: state_chg to WAIT-CFG-RES
|
1433
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T62-S62)) lapd_send_i() called from line 1672
|
1434
|
DLLAPD INFO <0016> lapd_core.c:1681 ((0:1-T62-S62)) we are not busy and have no pending data, send RR
|
1435
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T62-S62)) TX: f8 7d 01 16
|
1436
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 14, sapi(62) tei(62)
|
1437
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: f8 7d 16 16 80 80 00 06 00 12 0a 00 ff 00
|
1438
|
DLLAPD INFO <0016> lapd_core.c:1520 ((0:1-T62-S62)) I received in state LAPD_STATE_MF_EST on SAPI(62)
|
1439
|
DLLAPD INFO <0016> lapd_core.c:1606 ((0:1-T62-S62)) incrementing V(R) to 12
|
1440
|
DLLAPD INFO <0016> lapd_core.c:232 ((0:1-T62-S62)) stop T203
|
1441
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T62-S62)) start T203
|
1442
|
DLLAPD INFO <0016> lapd_core.c:1615 ((0:1-T62-S62)) message in single I frame
|
1443
|
DLMI DEBUG <0019> e1_input.c:752 E1TS(0:1) RX: 80 80 00 06 00 12 0a 00 ff 00 sapi=62 tei=62
|
1444
|
DNM DEBUG <0004> abis_om2000.c:2914 Rx MO=CF/00/ff/00 Calendar Time Request (80 80 00 06 00 12 0a 00 ff 00 )
|
1445
|
DNM ERROR <0004> abis_om2000.c:3006 MO object should not generate any message. fsm == NULL Calendar Time Request: [L2]> 80 80 00 06 00 12 0a 00 ff 00 [L3]>
|
1446
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T62-S62)) lapd_send_i() called from line 1672
|
1447
|
DLLAPD INFO <0016> lapd_core.c:1681 ((0:1-T62-S62)) we are not busy and have no pending data, send RR
|
1448
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T62-S62)) TX: f8 7d 01 18
|
1449
|
DLMI ERROR <0019> input/dahdi.c:262 E1TS(0:1) TX: 80 80 00 0d 00 10 0a 00 ff 00 0d 14 0b 0a 0f 1e 24
|
1450
|
DLLAPD INFO <0016> lapd_core.c:2233 ((0:1-T62-S62)) Message DL-DATA-REQUEST received in state LAPD_STATE_MF_EST
|
1451
|
DLLAPD INFO <0016> lapd_core.c:1816 ((0:1-T62-S62)) writing message to send-queue: l3len: 17
|
1452
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T62-S62)) lapd_send_i() called from line 1822
|
1453
|
DLLAPD INFO <0016> lapd_core.c:1877 ((0:1-T62-S62)) get message from send-queue
|
1454
|
DLLAPD INFO <0016> lapd_core.c:1888 ((0:1-T62-S62)) msg-len 17 sent 0 left 17 N201 260 length 17 first byte 80
|
1455
|
DLLAPD INFO <0016> lapd_core.c:1897 ((0:1-T62-S62)) send I frame V(S)=11
|
1456
|
DLLAPD INFO <0016> lapd_core.c:232 ((0:1-T62-S62)) stop T203
|
1457
|
DLLAPD INFO <0016> lapd_core.c:208 ((0:1-T62-S62)) start T200 (timeout=0.300000s)
|
1458
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T62-S62)) TX: fa 7d 16 18 80 80 00 0d 00 10 0a 00 ff 00 0d 14 0b 0a 0f 1e 24
|
1459
|
DLLAPD INFO <0016> lapd_core.c:1861 ((0:1-T62-S62)) k frames outstanding, not sending more (k=1 V(S)=12 V(A)=11)
|
1460
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 4, sapi(62) tei(62)
|
1461
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: fa 7d 01 18
|
1462
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:1-T62-S62)) RR received in state LAPD_STATE_MF_EST
|
1463
|
DLLAPD INFO <0016> lapd_core.c:765 ((0:1-T62-S62)) ack frame 11
|
1464
|
DLLAPD INFO <0016> lapd_core.c:224 ((0:1-T62-S62)) stop T200
|
1465
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T62-S62)) start T203
|
1466
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T62-S62)) lapd_send_i() called from line 1373
|
1467
|
DLLAPD INFO <0016> lapd_core.c:1888 ((0:1-T62-S62)) msg-len 17 sent 17 left 0 N201 260 length 0 first byte 80
|
1468
|
DHODEC DEBUG <0009> handover_decision_2.c:1853 (BTS 0) No congestion check: TRX 0 not usable
|
1469
|
DHODEC DEBUG <0009> handover_decision_2.c:163 HO algorithm 2: next periodical congestion check in 10 seconds
|
1470
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:7) <= len = 4, sapi(62) tei(2)
|
1471
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:7: RX: f8 05 01 01
|
1472
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:7-T2-S62)) RR received in state LAPD_STATE_MF_EST
|
1473
|
DLLAPD INFO <0016> lapd_core.c:232 ((0:7-T2-S62)) stop T203
|
1474
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:7-T2-S62)) start T203
|
1475
|
DLLAPD INFO <0016> lapd_core.c:1348 ((0:7-T2-S62)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
|
1476
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:7-T2-S62)) TX: f8 05 01 01
|
1477
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:7-T2-S62)) lapd_send_i() called from line 1373
|
1478
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 4, sapi(62) tei(0)
|
1479
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: f8 01 01 01
|
1480
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:1-T0-S62)) RR received in state LAPD_STATE_MF_EST
|
1481
|
DLLAPD INFO <0016> lapd_core.c:232 ((0:1-T0-S62)) stop T203
|
1482
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T0-S62)) start T203
|
1483
|
DLLAPD INFO <0016> lapd_core.c:1348 ((0:1-T0-S62)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
|
1484
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T0-S62)) TX: f8 01 01 01
|
1485
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T0-S62)) lapd_send_i() called from line 1373
|
1486
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:10) <= len = 4, sapi(62) tei(3)
|
1487
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:10: RX: f8 07 01 01
|
1488
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:10-T3-S62)) RR received in state LAPD_STATE_MF_EST
|
1489
|
DLLAPD INFO <0016> lapd_core.c:232 ((0:10-T3-S62)) stop T203
|
1490
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:10-T3-S62)) start T203
|
1491
|
DLLAPD INFO <0016> lapd_core.c:1348 ((0:10-T3-S62)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
|
1492
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:10-T3-S62)) TX: f8 07 01 01
|
1493
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:10-T3-S62)) lapd_send_i() called from line 1373
|
1494
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:4) <= len = 4, sapi(62) tei(1)
|
1495
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:4: RX: f8 03 01 01
|
1496
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:4-T1-S62)) RR received in state LAPD_STATE_MF_EST
|
1497
|
DLLAPD INFO <0016> lapd_core.c:232 ((0:4-T1-S62)) stop T203
|
1498
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:4-T1-S62)) start T203
|
1499
|
DLLAPD INFO <0016> lapd_core.c:1348 ((0:4-T1-S62)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
|
1500
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:4-T1-S62)) TX: f8 03 01 01
|
1501
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:4-T1-S62)) lapd_send_i() called from line 1373
|
1502
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:7) <= len = 4, sapi(0) tei(2)
|
1503
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:7: RX: 00 05 01 09
|
1504
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:7-T2-S0)) RR received in state LAPD_STATE_MF_EST
|
1505
|
DLLAPD INFO <0016> lapd_core.c:232 ((0:7-T2-S0)) stop T203
|
1506
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:7-T2-S0)) start T203
|
1507
|
DLLAPD INFO <0016> lapd_core.c:1348 ((0:7-T2-S0)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
|
1508
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:7-T2-S0)) TX: 00 05 01 03
|
1509
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:7-T2-S0)) lapd_send_i() called from line 1373
|
1510
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:10) <= len = 4, sapi(0) tei(3)
|
1511
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:10: RX: 00 07 01 09
|
1512
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:10-T3-S0)) RR received in state LAPD_STATE_MF_EST
|
1513
|
DLLAPD INFO <0016> lapd_core.c:232 ((0:10-T3-S0)) stop T203
|
1514
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:10-T3-S0)) start T203
|
1515
|
DLLAPD INFO <0016> lapd_core.c:1348 ((0:10-T3-S0)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
|
1516
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:10-T3-S0)) TX: 00 07 01 03
|
1517
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:10-T3-S0)) lapd_send_i() called from line 1373
|
1518
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:4) <= len = 4, sapi(0) tei(1)
|
1519
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:4: RX: 00 03 01 09
|
1520
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:4-T1-S0)) RR received in state LAPD_STATE_MF_EST
|
1521
|
DLLAPD INFO <0016> lapd_core.c:232 ((0:4-T1-S0)) stop T203
|
1522
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:4-T1-S0)) start T203
|
1523
|
DLLAPD INFO <0016> lapd_core.c:1348 ((0:4-T1-S0)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
|
1524
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:4-T1-S0)) TX: 00 03 01 03
|
1525
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:4-T1-S0)) lapd_send_i() called from line 1373
|
1526
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 4, sapi(0) tei(0)
|
1527
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: 00 01 01 17
|
1528
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:1-T0-S0)) RR received in state LAPD_STATE_MF_EST
|
1529
|
DLLAPD INFO <0016> lapd_core.c:232 ((0:1-T0-S0)) stop T203
|
1530
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T0-S0)) start T203
|
1531
|
DLLAPD INFO <0016> lapd_core.c:1348 ((0:1-T0-S0)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
|
1532
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T0-S0)) TX: 00 01 01 11
|
1533
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T0-S0)) lapd_send_i() called from line 1373
|
1534
|
DLLAPD INFO <0016> lapd_core.c:719 ((0:1-T62-S62)) Timeout T203 state=LAPD_STATE_MF_EST
|
1535
|
DLLAPD INFO <0016> lapd_core.c:239 ((0:1-T62-S62)) new state LAPD_STATE_MF_EST -> LAPD_STATE_TIMER_RECOV
|
1536
|
DLLAPD INFO <0016> lapd_core.c:732 ((0:1-T62-S62)) transmit an RR poll command
|
1537
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T62-S62)) TX: fa 7d 01 19
|
1538
|
DLLAPD INFO <0016> lapd_core.c:208 ((0:1-T62-S62)) start T200 (timeout=0.300000s)
|
1539
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 4, sapi(62) tei(62)
|
1540
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: fa 7d 01 19
|
1541
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:1-T62-S62)) RR received in state LAPD_STATE_TIMER_RECOV
|
1542
|
DLLAPD INFO <0016> lapd_core.c:1364 ((0:1-T62-S62)) RR response with F==1, and we are in timer recovery state, so we leave that state
|
1543
|
DLLAPD INFO <0016> lapd_core.c:224 ((0:1-T62-S62)) stop T200
|
1544
|
DLLAPD INFO <0016> lapd_core.c:239 ((0:1-T62-S62)) new state LAPD_STATE_TIMER_RECOV -> LAPD_STATE_MF_EST
|
1545
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T62-S62)) start T203
|
1546
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T62-S62)) lapd_send_i() called from line 1373
|
1547
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 4, sapi(62) tei(62)
|
1548
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: f8 7d 01 19
|
1549
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:1-T62-S62)) RR received in state LAPD_STATE_MF_EST
|
1550
|
DLLAPD INFO <0016> lapd_core.c:232 ((0:1-T62-S62)) stop T203
|
1551
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T62-S62)) start T203
|
1552
|
DLLAPD INFO <0016> lapd_core.c:1348 ((0:1-T62-S62)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
|
1553
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T62-S62)) TX: f8 7d 01 19
|
1554
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T62-S62)) lapd_send_i() called from line 1373
|
1555
|
DHODEC DEBUG <0009> handover_decision_2.c:1853 (BTS 0) No congestion check: TRX 0 not usable
|
1556
|
DHODEC DEBUG <0009> handover_decision_2.c:163 HO algorithm 2: next periodical congestion check in 10 seconds
|
1557
|
DLLAPD INFO <0016> lapd_core.c:719 ((0:7-T2-S62)) Timeout T203 state=LAPD_STATE_MF_EST
|
1558
|
DLLAPD INFO <0016> lapd_core.c:239 ((0:7-T2-S62)) new state LAPD_STATE_MF_EST -> LAPD_STATE_TIMER_RECOV
|
1559
|
DLLAPD INFO <0016> lapd_core.c:732 ((0:7-T2-S62)) transmit an RR poll command
|
1560
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:7-T2-S62)) TX: fa 05 01 01
|
1561
|
DLLAPD INFO <0016> lapd_core.c:208 ((0:7-T2-S62)) start T200 (timeout=0.300000s)
|
1562
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:7) <= len = 4, sapi(62) tei(2)
|
1563
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:7: RX: f8 05 01 01
|
1564
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:7-T2-S62)) RR received in state LAPD_STATE_TIMER_RECOV
|
1565
|
DLLAPD INFO <0016> lapd_core.c:1348 ((0:7-T2-S62)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
|
1566
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:7-T2-S62)) TX: f8 05 01 01
|
1567
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:7-T2-S62)) lapd_send_i() called from line 1373
|
1568
|
DLLAPD INFO <0016> lapd_core.c:1849 ((0:7-T2-S62)) timer recovery, not sending
|
1569
|
DLLAPD INFO <0016> lapd_core.c:719 ((0:1-T0-S62)) Timeout T203 state=LAPD_STATE_MF_EST
|
1570
|
DLLAPD INFO <0016> lapd_core.c:239 ((0:1-T0-S62)) new state LAPD_STATE_MF_EST -> LAPD_STATE_TIMER_RECOV
|
1571
|
DLLAPD INFO <0016> lapd_core.c:732 ((0:1-T0-S62)) transmit an RR poll command
|
1572
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T0-S62)) TX: fa 01 01 01
|
1573
|
DLLAPD INFO <0016> lapd_core.c:208 ((0:1-T0-S62)) start T200 (timeout=0.300000s)
|
1574
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 4, sapi(62) tei(0)
|
1575
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: f8 01 01 01
|
1576
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:1-T0-S62)) RR received in state LAPD_STATE_TIMER_RECOV
|
1577
|
DLLAPD INFO <0016> lapd_core.c:1348 ((0:1-T0-S62)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
|
1578
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T0-S62)) TX: f8 01 01 01
|
1579
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T0-S62)) lapd_send_i() called from line 1373
|
1580
|
DLLAPD INFO <0016> lapd_core.c:1849 ((0:1-T0-S62)) timer recovery, not sending
|
1581
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:10) <= len = 4, sapi(62) tei(3)
|
1582
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:10: RX: f8 07 01 01
|
1583
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:10-T3-S62)) RR received in state LAPD_STATE_MF_EST
|
1584
|
DLLAPD INFO <0016> lapd_core.c:232 ((0:10-T3-S62)) stop T203
|
1585
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:10-T3-S62)) start T203
|
1586
|
DLLAPD INFO <0016> lapd_core.c:1348 ((0:10-T3-S62)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
|
1587
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:10-T3-S62)) TX: f8 07 01 01
|
1588
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:10-T3-S62)) lapd_send_i() called from line 1373
|
1589
|
DLLAPD INFO <0016> lapd_core.c:719 ((0:4-T1-S62)) Timeout T203 state=LAPD_STATE_MF_EST
|
1590
|
DLLAPD INFO <0016> lapd_core.c:239 ((0:4-T1-S62)) new state LAPD_STATE_MF_EST -> LAPD_STATE_TIMER_RECOV
|
1591
|
DLLAPD INFO <0016> lapd_core.c:732 ((0:4-T1-S62)) transmit an RR poll command
|
1592
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:4-T1-S62)) TX: fa 03 01 01
|
1593
|
DLLAPD INFO <0016> lapd_core.c:208 ((0:4-T1-S62)) start T200 (timeout=0.300000s)
|
1594
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:4) <= len = 4, sapi(62) tei(1)
|
1595
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:4: RX: f8 03 01 01
|
1596
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:4-T1-S62)) RR received in state LAPD_STATE_TIMER_RECOV
|
1597
|
DLLAPD INFO <0016> lapd_core.c:1348 ((0:4-T1-S62)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
|
1598
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:4-T1-S62)) TX: f8 03 01 01
|
1599
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:4-T1-S62)) lapd_send_i() called from line 1373
|
1600
|
DLLAPD INFO <0016> lapd_core.c:1849 ((0:4-T1-S62)) timer recovery, not sending
|
1601
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:7) <= len = 4, sapi(62) tei(2)
|
1602
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:7: RX: fa 05 01 01
|
1603
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:7-T2-S62)) RR received in state LAPD_STATE_TIMER_RECOV
|
1604
|
DLLAPD INFO <0016> lapd_core.c:1364 ((0:7-T2-S62)) RR response with F==1, and we are in timer recovery state, so we leave that state
|
1605
|
DLLAPD INFO <0016> lapd_core.c:224 ((0:7-T2-S62)) stop T200
|
1606
|
DLLAPD INFO <0016> lapd_core.c:239 ((0:7-T2-S62)) new state LAPD_STATE_TIMER_RECOV -> LAPD_STATE_MF_EST
|
1607
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:7-T2-S62)) start T203
|
1608
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:7-T2-S62)) lapd_send_i() called from line 1373
|
1609
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 4, sapi(62) tei(0)
|
1610
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: fa 01 01 01
|
1611
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:1-T0-S62)) RR received in state LAPD_STATE_TIMER_RECOV
|
1612
|
DLLAPD INFO <0016> lapd_core.c:1364 ((0:1-T0-S62)) RR response with F==1, and we are in timer recovery state, so we leave that state
|
1613
|
DLLAPD INFO <0016> lapd_core.c:224 ((0:1-T0-S62)) stop T200
|
1614
|
DLLAPD INFO <0016> lapd_core.c:239 ((0:1-T0-S62)) new state LAPD_STATE_TIMER_RECOV -> LAPD_STATE_MF_EST
|
1615
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T0-S62)) start T203
|
1616
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T0-S62)) lapd_send_i() called from line 1373
|
1617
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:4) <= len = 4, sapi(62) tei(1)
|
1618
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:4: RX: fa 03 01 01
|
1619
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:4-T1-S62)) RR received in state LAPD_STATE_TIMER_RECOV
|
1620
|
DLLAPD INFO <0016> lapd_core.c:1364 ((0:4-T1-S62)) RR response with F==1, and we are in timer recovery state, so we leave that state
|
1621
|
DLLAPD INFO <0016> lapd_core.c:224 ((0:4-T1-S62)) stop T200
|
1622
|
DLLAPD INFO <0016> lapd_core.c:239 ((0:4-T1-S62)) new state LAPD_STATE_TIMER_RECOV -> LAPD_STATE_MF_EST
|
1623
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:4-T1-S62)) start T203
|
1624
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:4-T1-S62)) lapd_send_i() called from line 1373
|
1625
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:7) <= len = 4, sapi(0) tei(2)
|
1626
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:7: RX: 00 05 01 09
|
1627
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:7-T2-S0)) RR received in state LAPD_STATE_MF_EST
|
1628
|
DLLAPD INFO <0016> lapd_core.c:232 ((0:7-T2-S0)) stop T203
|
1629
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:7-T2-S0)) start T203
|
1630
|
DLLAPD INFO <0016> lapd_core.c:1348 ((0:7-T2-S0)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
|
1631
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:7-T2-S0)) TX: 00 05 01 03
|
1632
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:7-T2-S0)) lapd_send_i() called from line 1373
|
1633
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:10) <= len = 4, sapi(0) tei(3)
|
1634
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:10: RX: 00 07 01 09
|
1635
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:10-T3-S0)) RR received in state LAPD_STATE_MF_EST
|
1636
|
DLLAPD INFO <0016> lapd_core.c:232 ((0:10-T3-S0)) stop T203
|
1637
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:10-T3-S0)) start T203
|
1638
|
DLLAPD INFO <0016> lapd_core.c:1348 ((0:10-T3-S0)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
|
1639
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:10-T3-S0)) TX: 00 07 01 03
|
1640
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:10-T3-S0)) lapd_send_i() called from line 1373
|
1641
|
DLLAPD INFO <0016> lapd_core.c:719 ((0:4-T1-S0)) Timeout T203 state=LAPD_STATE_MF_EST
|
1642
|
DLLAPD INFO <0016> lapd_core.c:239 ((0:4-T1-S0)) new state LAPD_STATE_MF_EST -> LAPD_STATE_TIMER_RECOV
|
1643
|
DLLAPD INFO <0016> lapd_core.c:732 ((0:4-T1-S0)) transmit an RR poll command
|
1644
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:4-T1-S0)) TX: 02 03 01 03
|
1645
|
DLLAPD INFO <0016> lapd_core.c:208 ((0:4-T1-S0)) start T200 (timeout=0.300000s)
|
1646
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:4) <= len = 4, sapi(0) tei(1)
|
1647
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:4: RX: 00 03 01 09
|
1648
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:4-T1-S0)) RR received in state LAPD_STATE_TIMER_RECOV
|
1649
|
DLLAPD INFO <0016> lapd_core.c:1348 ((0:4-T1-S0)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
|
1650
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:4-T1-S0)) TX: 00 03 01 03
|
1651
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:4-T1-S0)) lapd_send_i() called from line 1373
|
1652
|
DLLAPD INFO <0016> lapd_core.c:1849 ((0:4-T1-S0)) timer recovery, not sending
|
1653
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:4) <= len = 4, sapi(0) tei(1)
|
1654
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:4: RX: 02 03 01 09
|
1655
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:4-T1-S0)) RR received in state LAPD_STATE_TIMER_RECOV
|
1656
|
DLLAPD INFO <0016> lapd_core.c:1364 ((0:4-T1-S0)) RR response with F==1, and we are in timer recovery state, so we leave that state
|
1657
|
DLLAPD INFO <0016> lapd_core.c:224 ((0:4-T1-S0)) stop T200
|
1658
|
DLLAPD INFO <0016> lapd_core.c:239 ((0:4-T1-S0)) new state LAPD_STATE_TIMER_RECOV -> LAPD_STATE_MF_EST
|
1659
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:4-T1-S0)) start T203
|
1660
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:4-T1-S0)) lapd_send_i() called from line 1373
|
1661
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 4, sapi(0) tei(0)
|
1662
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: 00 01 01 17
|
1663
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:1-T0-S0)) RR received in state LAPD_STATE_MF_EST
|
1664
|
DLLAPD INFO <0016> lapd_core.c:232 ((0:1-T0-S0)) stop T203
|
1665
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T0-S0)) start T203
|
1666
|
DLLAPD INFO <0016> lapd_core.c:1348 ((0:1-T0-S0)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
|
1667
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T0-S0)) TX: 00 01 01 11
|
1668
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T0-S0)) lapd_send_i() called from line 1373
|
1669
|
DLLAPD INFO <0016> lapd_core.c:719 ((0:1-T62-S62)) Timeout T203 state=LAPD_STATE_MF_EST
|
1670
|
DLLAPD INFO <0016> lapd_core.c:239 ((0:1-T62-S62)) new state LAPD_STATE_MF_EST -> LAPD_STATE_TIMER_RECOV
|
1671
|
DLLAPD INFO <0016> lapd_core.c:732 ((0:1-T62-S62)) transmit an RR poll command
|
1672
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T62-S62)) TX: fa 7d 01 19
|
1673
|
DLLAPD INFO <0016> lapd_core.c:208 ((0:1-T62-S62)) start T200 (timeout=0.300000s)
|
1674
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 4, sapi(62) tei(62)
|
1675
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: fa 7d 01 19
|
1676
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:1-T62-S62)) RR received in state LAPD_STATE_TIMER_RECOV
|
1677
|
DLLAPD INFO <0016> lapd_core.c:1364 ((0:1-T62-S62)) RR response with F==1, and we are in timer recovery state, so we leave that state
|
1678
|
DLLAPD INFO <0016> lapd_core.c:224 ((0:1-T62-S62)) stop T200
|
1679
|
DLLAPD INFO <0016> lapd_core.c:239 ((0:1-T62-S62)) new state LAPD_STATE_TIMER_RECOV -> LAPD_STATE_MF_EST
|
1680
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T62-S62)) start T203
|
1681
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T62-S62)) lapd_send_i() called from line 1373
|
1682
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 4, sapi(62) tei(62)
|
1683
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: f8 7d 01 19
|
1684
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:1-T62-S62)) RR received in state LAPD_STATE_MF_EST
|
1685
|
DLLAPD INFO <0016> lapd_core.c:232 ((0:1-T62-S62)) stop T203
|
1686
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T62-S62)) start T203
|
1687
|
DLLAPD INFO <0016> lapd_core.c:1348 ((0:1-T62-S62)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
|
1688
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T62-S62)) TX: f8 7d 01 19
|
1689
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T62-S62)) lapd_send_i() called from line 1373
|
1690
|
DHODEC DEBUG <0009> handover_decision_2.c:1853 (BTS 0) No congestion check: TRX 0 not usable
|
1691
|
DHODEC DEBUG <0009> handover_decision_2.c:163 HO algorithm 2: next periodical congestion check in 10 seconds
|
1692
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:7) <= len = 4, sapi(62) tei(2)
|
1693
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:7: RX: f8 05 01 01
|
1694
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:7-T2-S62)) RR received in state LAPD_STATE_MF_EST
|
1695
|
DLLAPD INFO <0016> lapd_core.c:232 ((0:7-T2-S62)) stop T203
|
1696
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:7-T2-S62)) start T203
|
1697
|
DLLAPD INFO <0016> lapd_core.c:1348 ((0:7-T2-S62)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
|
1698
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:7-T2-S62)) TX: f8 05 01 01
|
1699
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:7-T2-S62)) lapd_send_i() called from line 1373
|
1700
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 4, sapi(62) tei(0)
|
1701
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: f8 01 01 01
|
1702
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:1-T0-S62)) RR received in state LAPD_STATE_MF_EST
|
1703
|
DLLAPD INFO <0016> lapd_core.c:232 ((0:1-T0-S62)) stop T203
|
1704
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T0-S62)) start T203
|
1705
|
DLLAPD INFO <0016> lapd_core.c:1348 ((0:1-T0-S62)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
|
1706
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T0-S62)) TX: f8 01 01 01
|
1707
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T0-S62)) lapd_send_i() called from line 1373
|
1708
|
DLLAPD INFO <0016> lapd_core.c:719 ((0:10-T3-S62)) Timeout T203 state=LAPD_STATE_MF_EST
|
1709
|
DLLAPD INFO <0016> lapd_core.c:239 ((0:10-T3-S62)) new state LAPD_STATE_MF_EST -> LAPD_STATE_TIMER_RECOV
|
1710
|
DLLAPD INFO <0016> lapd_core.c:732 ((0:10-T3-S62)) transmit an RR poll command
|
1711
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:10-T3-S62)) TX: fa 07 01 01
|
1712
|
DLLAPD INFO <0016> lapd_core.c:208 ((0:10-T3-S62)) start T200 (timeout=0.300000s)
|
1713
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:10) <= len = 4, sapi(62) tei(3)
|
1714
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:10: RX: f8 07 01 01
|
1715
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:10-T3-S62)) RR received in state LAPD_STATE_TIMER_RECOV
|
1716
|
DLLAPD INFO <0016> lapd_core.c:1348 ((0:10-T3-S62)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
|
1717
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:10-T3-S62)) TX: f8 07 01 01
|
1718
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:10-T3-S62)) lapd_send_i() called from line 1373
|
1719
|
DLLAPD INFO <0016> lapd_core.c:1849 ((0:10-T3-S62)) timer recovery, not sending
|
1720
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:4) <= len = 4, sapi(62) tei(1)
|
1721
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:4: RX: f8 03 01 01
|
1722
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:4-T1-S62)) RR received in state LAPD_STATE_MF_EST
|
1723
|
DLLAPD INFO <0016> lapd_core.c:232 ((0:4-T1-S62)) stop T203
|
1724
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:4-T1-S62)) start T203
|
1725
|
DLLAPD INFO <0016> lapd_core.c:1348 ((0:4-T1-S62)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
|
1726
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:4-T1-S62)) TX: f8 03 01 01
|
1727
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:4-T1-S62)) lapd_send_i() called from line 1373
|
1728
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:10) <= len = 4, sapi(62) tei(3)
|
1729
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:10: RX: fa 07 01 01
|
1730
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:10-T3-S62)) RR received in state LAPD_STATE_TIMER_RECOV
|
1731
|
DLLAPD INFO <0016> lapd_core.c:1364 ((0:10-T3-S62)) RR response with F==1, and we are in timer recovery state, so we leave that state
|
1732
|
DLLAPD INFO <0016> lapd_core.c:224 ((0:10-T3-S62)) stop T200
|
1733
|
DLLAPD INFO <0016> lapd_core.c:239 ((0:10-T3-S62)) new state LAPD_STATE_TIMER_RECOV -> LAPD_STATE_MF_EST
|
1734
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:10-T3-S62)) start T203
|
1735
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:10-T3-S62)) lapd_send_i() called from line 1373
|
1736
|
DLLAPD INFO <0016> lapd_core.c:719 ((0:7-T2-S0)) Timeout T203 state=LAPD_STATE_MF_EST
|
1737
|
DLLAPD INFO <0016> lapd_core.c:239 ((0:7-T2-S0)) new state LAPD_STATE_MF_EST -> LAPD_STATE_TIMER_RECOV
|
1738
|
DLLAPD INFO <0016> lapd_core.c:732 ((0:7-T2-S0)) transmit an RR poll command
|
1739
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:7-T2-S0)) TX: 02 05 01 03
|
1740
|
DLLAPD INFO <0016> lapd_core.c:208 ((0:7-T2-S0)) start T200 (timeout=0.300000s)
|
1741
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:7) <= len = 4, sapi(0) tei(2)
|
1742
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:7: RX: 00 05 01 09
|
1743
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:7-T2-S0)) RR received in state LAPD_STATE_TIMER_RECOV
|
1744
|
DLLAPD INFO <0016> lapd_core.c:1348 ((0:7-T2-S0)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
|
1745
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:7-T2-S0)) TX: 00 05 01 03
|
1746
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:7-T2-S0)) lapd_send_i() called from line 1373
|
1747
|
DLLAPD INFO <0016> lapd_core.c:1849 ((0:7-T2-S0)) timer recovery, not sending
|
1748
|
DLLAPD INFO <0016> lapd_core.c:719 ((0:10-T3-S0)) Timeout T203 state=LAPD_STATE_MF_EST
|
1749
|
DLLAPD INFO <0016> lapd_core.c:239 ((0:10-T3-S0)) new state LAPD_STATE_MF_EST -> LAPD_STATE_TIMER_RECOV
|
1750
|
DLLAPD INFO <0016> lapd_core.c:732 ((0:10-T3-S0)) transmit an RR poll command
|
1751
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:10-T3-S0)) TX: 02 07 01 03
|
1752
|
DLLAPD INFO <0016> lapd_core.c:208 ((0:10-T3-S0)) start T200 (timeout=0.300000s)
|
1753
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:10) <= len = 4, sapi(0) tei(3)
|
1754
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:10: RX: 00 07 01 09
|
1755
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:10-T3-S0)) RR received in state LAPD_STATE_TIMER_RECOV
|
1756
|
DLLAPD INFO <0016> lapd_core.c:1348 ((0:10-T3-S0)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
|
1757
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:10-T3-S0)) TX: 00 07 01 03
|
1758
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:10-T3-S0)) lapd_send_i() called from line 1373
|
1759
|
DLLAPD INFO <0016> lapd_core.c:1849 ((0:10-T3-S0)) timer recovery, not sending
|
1760
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:4) <= len = 4, sapi(0) tei(1)
|
1761
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:4: RX: 00 03 01 09
|
1762
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:4-T1-S0)) RR received in state LAPD_STATE_MF_EST
|
1763
|
DLLAPD INFO <0016> lapd_core.c:232 ((0:4-T1-S0)) stop T203
|
1764
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:4-T1-S0)) start T203
|
1765
|
DLLAPD INFO <0016> lapd_core.c:1348 ((0:4-T1-S0)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
|
1766
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:4-T1-S0)) TX: 00 03 01 03
|
1767
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:4-T1-S0)) lapd_send_i() called from line 1373
|
1768
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:7) <= len = 4, sapi(0) tei(2)
|
1769
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:7: RX: 02 05 01 09
|
1770
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:7-T2-S0)) RR received in state LAPD_STATE_TIMER_RECOV
|
1771
|
DLLAPD INFO <0016> lapd_core.c:1364 ((0:7-T2-S0)) RR response with F==1, and we are in timer recovery state, so we leave that state
|
1772
|
DLLAPD INFO <0016> lapd_core.c:224 ((0:7-T2-S0)) stop T200
|
1773
|
DLLAPD INFO <0016> lapd_core.c:239 ((0:7-T2-S0)) new state LAPD_STATE_TIMER_RECOV -> LAPD_STATE_MF_EST
|
1774
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:7-T2-S0)) start T203
|
1775
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:7-T2-S0)) lapd_send_i() called from line 1373
|
1776
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:10) <= len = 4, sapi(0) tei(3)
|
1777
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:10: RX: 02 07 01 09
|
1778
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:10-T3-S0)) RR received in state LAPD_STATE_TIMER_RECOV
|
1779
|
DLLAPD INFO <0016> lapd_core.c:1364 ((0:10-T3-S0)) RR response with F==1, and we are in timer recovery state, so we leave that state
|
1780
|
DLLAPD INFO <0016> lapd_core.c:224 ((0:10-T3-S0)) stop T200
|
1781
|
DLLAPD INFO <0016> lapd_core.c:239 ((0:10-T3-S0)) new state LAPD_STATE_TIMER_RECOV -> LAPD_STATE_MF_EST
|
1782
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:10-T3-S0)) start T203
|
1783
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:10-T3-S0)) lapd_send_i() called from line 1373
|
1784
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 4, sapi(0) tei(0)
|
1785
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: 00 01 01 17
|
1786
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:1-T0-S0)) RR received in state LAPD_STATE_MF_EST
|
1787
|
DLLAPD INFO <0016> lapd_core.c:232 ((0:1-T0-S0)) stop T203
|
1788
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T0-S0)) start T203
|
1789
|
DLLAPD INFO <0016> lapd_core.c:1348 ((0:1-T0-S0)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
|
1790
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T0-S0)) TX: 00 01 01 11
|
1791
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T0-S0)) lapd_send_i() called from line 1373
|
1792
|
DLLAPD INFO <0016> lapd_core.c:719 ((0:1-T62-S62)) Timeout T203 state=LAPD_STATE_MF_EST
|
1793
|
DLLAPD INFO <0016> lapd_core.c:239 ((0:1-T62-S62)) new state LAPD_STATE_MF_EST -> LAPD_STATE_TIMER_RECOV
|
1794
|
DLLAPD INFO <0016> lapd_core.c:732 ((0:1-T62-S62)) transmit an RR poll command
|
1795
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T62-S62)) TX: fa 7d 01 19
|
1796
|
DLLAPD INFO <0016> lapd_core.c:208 ((0:1-T62-S62)) start T200 (timeout=0.300000s)
|
1797
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 4, sapi(62) tei(62)
|
1798
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: fa 7d 01 19
|
1799
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:1-T62-S62)) RR received in state LAPD_STATE_TIMER_RECOV
|
1800
|
DLLAPD INFO <0016> lapd_core.c:1364 ((0:1-T62-S62)) RR response with F==1, and we are in timer recovery state, so we leave that state
|
1801
|
DLLAPD INFO <0016> lapd_core.c:224 ((0:1-T62-S62)) stop T200
|
1802
|
DLLAPD INFO <0016> lapd_core.c:239 ((0:1-T62-S62)) new state LAPD_STATE_TIMER_RECOV -> LAPD_STATE_MF_EST
|
1803
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T62-S62)) start T203
|
1804
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T62-S62)) lapd_send_i() called from line 1373
|
1805
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 4, sapi(62) tei(62)
|
1806
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: f8 7d 01 19
|
1807
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:1-T62-S62)) RR received in state LAPD_STATE_MF_EST
|
1808
|
DLLAPD INFO <0016> lapd_core.c:232 ((0:1-T62-S62)) stop T203
|
1809
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T62-S62)) start T203
|
1810
|
DLLAPD INFO <0016> lapd_core.c:1348 ((0:1-T62-S62)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
|
1811
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T62-S62)) TX: f8 7d 01 19
|
1812
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T62-S62)) lapd_send_i() called from line 1373
|
1813
|
DHODEC DEBUG <0009> handover_decision_2.c:1853 (BTS 0) No congestion check: TRX 0 not usable
|
1814
|
DHODEC DEBUG <0009> handover_decision_2.c:163 HO algorithm 2: next periodical congestion check in 10 seconds
|
1815
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:7) <= len = 4, sapi(62) tei(2)
|
1816
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:7: RX: f8 05 01 01
|
1817
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:7-T2-S62)) RR received in state LAPD_STATE_MF_EST
|
1818
|
DLLAPD INFO <0016> lapd_core.c:232 ((0:7-T2-S62)) stop T203
|
1819
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:7-T2-S62)) start T203
|
1820
|
DLLAPD INFO <0016> lapd_core.c:1348 ((0:7-T2-S62)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
|
1821
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:7-T2-S62)) TX: f8 05 01 01
|
1822
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:7-T2-S62)) lapd_send_i() called from line 1373
|
1823
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 4, sapi(62) tei(0)
|
1824
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: f8 01 01 01
|
1825
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:1-T0-S62)) RR received in state LAPD_STATE_MF_EST
|
1826
|
DLLAPD INFO <0016> lapd_core.c:232 ((0:1-T0-S62)) stop T203
|
1827
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T0-S62)) start T203
|
1828
|
DLLAPD INFO <0016> lapd_core.c:1348 ((0:1-T0-S62)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
|
1829
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T0-S62)) TX: f8 01 01 01
|
1830
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T0-S62)) lapd_send_i() called from line 1373
|
1831
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:10) <= len = 4, sapi(62) tei(3)
|
1832
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:10: RX: f8 07 01 01
|
1833
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:10-T3-S62)) RR received in state LAPD_STATE_MF_EST
|
1834
|
DLLAPD INFO <0016> lapd_core.c:232 ((0:10-T3-S62)) stop T203
|
1835
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:10-T3-S62)) start T203
|
1836
|
DLLAPD INFO <0016> lapd_core.c:1348 ((0:10-T3-S62)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
|
1837
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:10-T3-S62)) TX: f8 07 01 01
|
1838
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:10-T3-S62)) lapd_send_i() called from line 1373
|
1839
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:4) <= len = 4, sapi(62) tei(1)
|
1840
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:4: RX: f8 03 01 01
|
1841
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:4-T1-S62)) RR received in state LAPD_STATE_MF_EST
|
1842
|
DLLAPD INFO <0016> lapd_core.c:232 ((0:4-T1-S62)) stop T203
|
1843
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:4-T1-S62)) start T203
|
1844
|
DLLAPD INFO <0016> lapd_core.c:1348 ((0:4-T1-S62)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
|
1845
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:4-T1-S62)) TX: f8 03 01 01
|
1846
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:4-T1-S62)) lapd_send_i() called from line 1373
|
1847
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:7) <= len = 4, sapi(0) tei(2)
|
1848
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:7: RX: 00 05 01 09
|
1849
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:7-T2-S0)) RR received in state LAPD_STATE_MF_EST
|
1850
|
DLLAPD INFO <0016> lapd_core.c:232 ((0:7-T2-S0)) stop T203
|
1851
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:7-T2-S0)) start T203
|
1852
|
DLLAPD INFO <0016> lapd_core.c:1348 ((0:7-T2-S0)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
|
1853
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:7-T2-S0)) TX: 00 05 01 03
|
1854
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:7-T2-S0)) lapd_send_i() called from line 1373
|
1855
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:10) <= len = 4, sapi(0) tei(3)
|
1856
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:10: RX: 00 07 01 09
|
1857
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:10-T3-S0)) RR received in state LAPD_STATE_MF_EST
|
1858
|
DLLAPD INFO <0016> lapd_core.c:232 ((0:10-T3-S0)) stop T203
|
1859
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:10-T3-S0)) start T203
|
1860
|
DLLAPD INFO <0016> lapd_core.c:1348 ((0:10-T3-S0)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
|
1861
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:10-T3-S0)) TX: 00 07 01 03
|
1862
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:10-T3-S0)) lapd_send_i() called from line 1373
|
1863
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:4) <= len = 4, sapi(0) tei(1)
|
1864
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:4: RX: 00 03 01 09
|
1865
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:4-T1-S0)) RR received in state LAPD_STATE_MF_EST
|
1866
|
DLLAPD INFO <0016> lapd_core.c:232 ((0:4-T1-S0)) stop T203
|
1867
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:4-T1-S0)) start T203
|
1868
|
DLLAPD INFO <0016> lapd_core.c:1348 ((0:4-T1-S0)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
|
1869
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:4-T1-S0)) TX: 00 03 01 03
|
1870
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:4-T1-S0)) lapd_send_i() called from line 1373
|
1871
|
DLLAPD INFO <0016> lapd_core.c:719 ((0:1-T0-S0)) Timeout T203 state=LAPD_STATE_MF_EST
|
1872
|
DLLAPD INFO <0016> lapd_core.c:239 ((0:1-T0-S0)) new state LAPD_STATE_MF_EST -> LAPD_STATE_TIMER_RECOV
|
1873
|
DLLAPD INFO <0016> lapd_core.c:732 ((0:1-T0-S0)) transmit an RR poll command
|
1874
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T0-S0)) TX: 02 01 01 11
|
1875
|
DLLAPD INFO <0016> lapd_core.c:208 ((0:1-T0-S0)) start T200 (timeout=0.300000s)
|
1876
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 4, sapi(0) tei(0)
|
1877
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: 00 01 01 17
|
1878
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:1-T0-S0)) RR received in state LAPD_STATE_TIMER_RECOV
|
1879
|
DLLAPD INFO <0016> lapd_core.c:1348 ((0:1-T0-S0)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
|
1880
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T0-S0)) TX: 00 01 01 11
|
1881
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T0-S0)) lapd_send_i() called from line 1373
|
1882
|
DLLAPD INFO <0016> lapd_core.c:1849 ((0:1-T0-S0)) timer recovery, not sending
|
1883
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 4, sapi(0) tei(0)
|
1884
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: 02 01 01 17
|
1885
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:1-T0-S0)) RR received in state LAPD_STATE_TIMER_RECOV
|
1886
|
DLLAPD INFO <0016> lapd_core.c:1364 ((0:1-T0-S0)) RR response with F==1, and we are in timer recovery state, so we leave that state
|
1887
|
DLLAPD INFO <0016> lapd_core.c:224 ((0:1-T0-S0)) stop T200
|
1888
|
DLLAPD INFO <0016> lapd_core.c:239 ((0:1-T0-S0)) new state LAPD_STATE_TIMER_RECOV -> LAPD_STATE_MF_EST
|
1889
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T0-S0)) start T203
|
1890
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T0-S0)) lapd_send_i() called from line 1373
|
1891
|
DLLAPD INFO <0016> lapd_core.c:719 ((0:1-T62-S62)) Timeout T203 state=LAPD_STATE_MF_EST
|
1892
|
DLLAPD INFO <0016> lapd_core.c:239 ((0:1-T62-S62)) new state LAPD_STATE_MF_EST -> LAPD_STATE_TIMER_RECOV
|
1893
|
DLLAPD INFO <0016> lapd_core.c:732 ((0:1-T62-S62)) transmit an RR poll command
|
1894
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T62-S62)) TX: fa 7d 01 19
|
1895
|
DLLAPD INFO <0016> lapd_core.c:208 ((0:1-T62-S62)) start T200 (timeout=0.300000s)
|
1896
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 4, sapi(62) tei(62)
|
1897
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: fa 7d 01 19
|
1898
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:1-T62-S62)) RR received in state LAPD_STATE_TIMER_RECOV
|
1899
|
DLLAPD INFO <0016> lapd_core.c:1364 ((0:1-T62-S62)) RR response with F==1, and we are in timer recovery state, so we leave that state
|
1900
|
DLLAPD INFO <0016> lapd_core.c:224 ((0:1-T62-S62)) stop T200
|
1901
|
DLLAPD INFO <0016> lapd_core.c:239 ((0:1-T62-S62)) new state LAPD_STATE_TIMER_RECOV -> LAPD_STATE_MF_EST
|
1902
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T62-S62)) start T203
|
1903
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T62-S62)) lapd_send_i() called from line 1373
|
1904
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 4, sapi(62) tei(62)
|
1905
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: f8 7d 01 19
|
1906
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:1-T62-S62)) RR received in state LAPD_STATE_MF_EST
|
1907
|
DLLAPD INFO <0016> lapd_core.c:232 ((0:1-T62-S62)) stop T203
|
1908
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T62-S62)) start T203
|
1909
|
DLLAPD INFO <0016> lapd_core.c:1348 ((0:1-T62-S62)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
|
1910
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T62-S62)) TX: f8 7d 01 19
|
1911
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T62-S62)) lapd_send_i() called from line 1373
|
1912
|
DHODEC DEBUG <0009> handover_decision_2.c:1853 (BTS 0) No congestion check: TRX 0 not usable
|
1913
|
DHODEC DEBUG <0009> handover_decision_2.c:163 HO algorithm 2: next periodical congestion check in 10 seconds
|
1914
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:7) <= len = 4, sapi(62) tei(2)
|
1915
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:7: RX: f8 05 01 01
|
1916
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:7-T2-S62)) RR received in state LAPD_STATE_MF_EST
|
1917
|
DLLAPD INFO <0016> lapd_core.c:232 ((0:7-T2-S62)) stop T203
|
1918
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:7-T2-S62)) start T203
|
1919
|
DLLAPD INFO <0016> lapd_core.c:1348 ((0:7-T2-S62)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
|
1920
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:7-T2-S62)) TX: f8 05 01 01
|
1921
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:7-T2-S62)) lapd_send_i() called from line 1373
|
1922
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 4, sapi(62) tei(0)
|
1923
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: f8 01 01 01
|
1924
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:1-T0-S62)) RR received in state LAPD_STATE_MF_EST
|
1925
|
DLLAPD INFO <0016> lapd_core.c:232 ((0:1-T0-S62)) stop T203
|
1926
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T0-S62)) start T203
|
1927
|
DLLAPD INFO <0016> lapd_core.c:1348 ((0:1-T0-S62)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
|
1928
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T0-S62)) TX: f8 01 01 01
|
1929
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T0-S62)) lapd_send_i() called from line 1373
|
1930
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:10) <= len = 4, sapi(62) tei(3)
|
1931
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:10: RX: f8 07 01 01
|
1932
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:10-T3-S62)) RR received in state LAPD_STATE_MF_EST
|
1933
|
DLLAPD INFO <0016> lapd_core.c:232 ((0:10-T3-S62)) stop T203
|
1934
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:10-T3-S62)) start T203
|
1935
|
DLLAPD INFO <0016> lapd_core.c:1348 ((0:10-T3-S62)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
|
1936
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:10-T3-S62)) TX: f8 07 01 01
|
1937
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:10-T3-S62)) lapd_send_i() called from line 1373
|
1938
|
DLLAPD INFO <0016> lapd_core.c:719 ((0:4-T1-S62)) Timeout T203 state=LAPD_STATE_MF_EST
|
1939
|
DLLAPD INFO <0016> lapd_core.c:239 ((0:4-T1-S62)) new state LAPD_STATE_MF_EST -> LAPD_STATE_TIMER_RECOV
|
1940
|
DLLAPD INFO <0016> lapd_core.c:732 ((0:4-T1-S62)) transmit an RR poll command
|
1941
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:4-T1-S62)) TX: fa 03 01 01
|
1942
|
DLLAPD INFO <0016> lapd_core.c:208 ((0:4-T1-S62)) start T200 (timeout=0.300000s)
|
1943
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:4) <= len = 4, sapi(62) tei(1)
|
1944
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:4: RX: f8 03 01 01
|
1945
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:4-T1-S62)) RR received in state LAPD_STATE_TIMER_RECOV
|
1946
|
DLLAPD INFO <0016> lapd_core.c:1348 ((0:4-T1-S62)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
|
1947
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:4-T1-S62)) TX: f8 03 01 01
|
1948
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:4-T1-S62)) lapd_send_i() called from line 1373
|
1949
|
DLLAPD INFO <0016> lapd_core.c:1849 ((0:4-T1-S62)) timer recovery, not sending
|
1950
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:4) <= len = 4, sapi(62) tei(1)
|
1951
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:4: RX: fa 03 01 01
|
1952
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:4-T1-S62)) RR received in state LAPD_STATE_TIMER_RECOV
|
1953
|
DLLAPD INFO <0016> lapd_core.c:1364 ((0:4-T1-S62)) RR response with F==1, and we are in timer recovery state, so we leave that state
|
1954
|
DLLAPD INFO <0016> lapd_core.c:224 ((0:4-T1-S62)) stop T200
|
1955
|
DLLAPD INFO <0016> lapd_core.c:239 ((0:4-T1-S62)) new state LAPD_STATE_TIMER_RECOV -> LAPD_STATE_MF_EST
|
1956
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:4-T1-S62)) start T203
|
1957
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:4-T1-S62)) lapd_send_i() called from line 1373
|
1958
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:7) <= len = 4, sapi(0) tei(2)
|
1959
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:7: RX: 00 05 01 09
|
1960
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:7-T2-S0)) RR received in state LAPD_STATE_MF_EST
|
1961
|
DLLAPD INFO <0016> lapd_core.c:232 ((0:7-T2-S0)) stop T203
|
1962
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:7-T2-S0)) start T203
|
1963
|
DLLAPD INFO <0016> lapd_core.c:1348 ((0:7-T2-S0)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
|
1964
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:7-T2-S0)) TX: 00 05 01 03
|
1965
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:7-T2-S0)) lapd_send_i() called from line 1373
|
1966
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:10) <= len = 4, sapi(0) tei(3)
|
1967
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:10: RX: 00 07 01 09
|
1968
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:10-T3-S0)) RR received in state LAPD_STATE_MF_EST
|
1969
|
DLLAPD INFO <0016> lapd_core.c:232 ((0:10-T3-S0)) stop T203
|
1970
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:10-T3-S0)) start T203
|
1971
|
DLLAPD INFO <0016> lapd_core.c:1348 ((0:10-T3-S0)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
|
1972
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:10-T3-S0)) TX: 00 07 01 03
|
1973
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:10-T3-S0)) lapd_send_i() called from line 1373
|
1974
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:4) <= len = 4, sapi(0) tei(1)
|
1975
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:4: RX: 00 03 01 09
|
1976
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:4-T1-S0)) RR received in state LAPD_STATE_MF_EST
|
1977
|
DLLAPD INFO <0016> lapd_core.c:232 ((0:4-T1-S0)) stop T203
|
1978
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:4-T1-S0)) start T203
|
1979
|
DLLAPD INFO <0016> lapd_core.c:1348 ((0:4-T1-S0)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
|
1980
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:4-T1-S0)) TX: 00 03 01 03
|
1981
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:4-T1-S0)) lapd_send_i() called from line 1373
|
1982
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 4, sapi(0) tei(0)
|
1983
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: 00 01 01 17
|
1984
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:1-T0-S0)) RR received in state LAPD_STATE_MF_EST
|
1985
|
DLLAPD INFO <0016> lapd_core.c:232 ((0:1-T0-S0)) stop T203
|
1986
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T0-S0)) start T203
|
1987
|
DLLAPD INFO <0016> lapd_core.c:1348 ((0:1-T0-S0)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
|
1988
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T0-S0)) TX: 00 01 01 11
|
1989
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T0-S0)) lapd_send_i() called from line 1373
|
1990
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 76, sapi(62) tei(62)
|
1991
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: f8 7d 18 18 80 80 00 44 00 42 0a 00 ff 00 23 00 00 00 00 00 00 24 00 00 00 00 00 00 25 00 00 00 02 00 08 14 00 00 15 00 00 34 81 00 00 00 04 00 2c 01 2a 00 26 20 04 20 00 00 02 50 00 20 00 00 00 00 b9 00 00 d2 00 00 00 00 00 00
|
1992
|
DLLAPD INFO <0016> lapd_core.c:1520 ((0:1-T62-S62)) I received in state LAPD_STATE_MF_EST on SAPI(62)
|
1993
|
DLLAPD INFO <0016> lapd_core.c:1606 ((0:1-T62-S62)) incrementing V(R) to 13
|
1994
|
DLLAPD INFO <0016> lapd_core.c:232 ((0:1-T62-S62)) stop T203
|
1995
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T62-S62)) start T203
|
1996
|
DLLAPD INFO <0016> lapd_core.c:1615 ((0:1-T62-S62)) message in single I frame
|
1997
|
DLMI DEBUG <0019> e1_input.c:752 E1TS(0:1) RX: 80 80 00 44 00 42 0a 00 ff 00 23 00 00 00 00 00 00 24 00 00 00 00 00 00 25 00 00 00 02 00 08 14 00 00 15 00 00 34 81 00 00 00 04 00 2c 01 2a 00 26 20 04 20 00 00 02 50 00 20 00 00 00 00 b9 00 00 d2 00 00 00 00 00 00 sapi=62 tei=62
|
1998
|
DNM DEBUG <0004> abis_om2000.c:2914 Rx MO=CF/00/ff/00 Fault Report (80 80 00 44 00 42 0a 00 ff 00 23 00 00 00 00 00 00 24 00 00 00 00 00 00 25 00 00 00 02 00 08 14 00 00 15 00 00 34 81 00 00 00 04 00 2c 01 2a 00 26 20 04 20 00 00 02 50 00 20 00 00 00 00 b9 00 00 d2 00 00 00 00 00 00 )
|
1999
|
DNM DEBUG <0004> abis_om2000.c:2740 Rx MO=CF/00/ff/00 Fault Report, MO State: STARTED
|
2000
|
DNM DEBUG <0004> abis_om2000.c:2789 Rx MO=CF/00/ff/00 Fault Report: Internal Fault Map Class 2A (25,43)
|
2001
|
DNM DEBUG <0004> abis_om2000.c:2789 Rx MO=CF/00/ff/00 Fault Report: Replacement Unit Map (0,7,34)
|
2002
|
DNM DEBUG <0004> abis_om2000.c:2789 Rx MO=CF/00/ff/00 Fault Report: Internal Fault Map Class 2A Extension (5,10,21,41)
|
2003
|
DNM DEBUG <0004> abis_om2000.c:2789 Rx MO=CF/00/ff/00 Fault Report: Replacement Unit Map Extension (13)
|
2004
|
DNM ERROR <0004> abis_om2000.c:2848 Rx MO=CF/00/ff/00 Fault Report: invalid tlv element!
|
2005
|
DNM DEBUG <0004> abis_om2000.c:1115 Tx MO=CF/00/ff/00 Fault Report ACK
|
2006
|
DNM ERROR <0004> abis_om2000.c:3006 MO object should not generate any message. fsm == NULL Fault Report: [L2]> 80 80 00 44 00 42 0a 00 ff 00 [L3]> 23 00 00 00 00 00 00 24 00 00 00 00 00 00 25 00 00 00 02 00 08 14 00 00 15 00 00 34 81 00 00 00 04 00 2c 01 2a 00 26 20 04 20 00 00 02 50 00 20 00 00 00 00 b9 00 00 d2 00 00 00 00 00 00
|
2007
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T62-S62)) lapd_send_i() called from line 1672
|
2008
|
DLLAPD INFO <0016> lapd_core.c:1681 ((0:1-T62-S62)) we are not busy and have no pending data, send RR
|
2009
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T62-S62)) TX: f8 7d 01 1a
|
2010
|
DLMI ERROR <0019> input/dahdi.c:262 E1TS(0:1) TX: 80 80 00 06 00 40 0a 00 ff 00
|
2011
|
DLLAPD INFO <0016> lapd_core.c:2233 ((0:1-T62-S62)) Message DL-DATA-REQUEST received in state LAPD_STATE_MF_EST
|
2012
|
DLLAPD INFO <0016> lapd_core.c:1816 ((0:1-T62-S62)) writing message to send-queue: l3len: 10
|
2013
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T62-S62)) lapd_send_i() called from line 1822
|
2014
|
DLLAPD INFO <0016> lapd_core.c:1877 ((0:1-T62-S62)) get message from send-queue
|
2015
|
DLLAPD INFO <0016> lapd_core.c:1888 ((0:1-T62-S62)) msg-len 10 sent 0 left 10 N201 260 length 10 first byte 80
|
2016
|
DLLAPD INFO <0016> lapd_core.c:1897 ((0:1-T62-S62)) send I frame V(S)=12
|
2017
|
DLLAPD INFO <0016> lapd_core.c:232 ((0:1-T62-S62)) stop T203
|
2018
|
DLLAPD INFO <0016> lapd_core.c:208 ((0:1-T62-S62)) start T200 (timeout=0.300000s)
|
2019
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T62-S62)) TX: fa 7d 18 1a 80 80 00 06 00 40 0a 00 ff 00
|
2020
|
DLLAPD INFO <0016> lapd_core.c:1861 ((0:1-T62-S62)) k frames outstanding, not sending more (k=1 V(S)=13 V(A)=12)
|
2021
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 4, sapi(62) tei(62)
|
2022
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: fa 7d 01 1a
|
2023
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:1-T62-S62)) RR received in state LAPD_STATE_MF_EST
|
2024
|
DLLAPD INFO <0016> lapd_core.c:765 ((0:1-T62-S62)) ack frame 12
|
2025
|
DLLAPD INFO <0016> lapd_core.c:224 ((0:1-T62-S62)) stop T200
|
2026
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T62-S62)) start T203
|
2027
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T62-S62)) lapd_send_i() called from line 1373
|
2028
|
DLLAPD INFO <0016> lapd_core.c:1888 ((0:1-T62-S62)) msg-len 10 sent 10 left 0 N201 260 length 0 first byte 80
|
2029
|
DHODEC DEBUG <0009> handover_decision_2.c:1853 (BTS 0) No congestion check: TRX 0 not usable
|
2030
|
DHODEC DEBUG <0009> handover_decision_2.c:163 HO algorithm 2: next periodical congestion check in 10 seconds
|
2031
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:7) <= len = 4, sapi(62) tei(2)
|
2032
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:7: RX: f8 05 01 01
|
2033
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:7-T2-S62)) RR received in state LAPD_STATE_MF_EST
|
2034
|
DLLAPD INFO <0016> lapd_core.c:232 ((0:7-T2-S62)) stop T203
|
2035
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:7-T2-S62)) start T203
|
2036
|
DLLAPD INFO <0016> lapd_core.c:1348 ((0:7-T2-S62)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
|
2037
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:7-T2-S62)) TX: f8 05 01 01
|
2038
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:7-T2-S62)) lapd_send_i() called from line 1373
|
2039
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 4, sapi(62) tei(0)
|
2040
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: f8 01 01 01
|
2041
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:1-T0-S62)) RR received in state LAPD_STATE_MF_EST
|
2042
|
DLLAPD INFO <0016> lapd_core.c:232 ((0:1-T0-S62)) stop T203
|
2043
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T0-S62)) start T203
|
2044
|
DLLAPD INFO <0016> lapd_core.c:1348 ((0:1-T0-S62)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
|
2045
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T0-S62)) TX: f8 01 01 01
|
2046
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T0-S62)) lapd_send_i() called from line 1373
|
2047
|
DLLAPD INFO <0016> lapd_core.c:719 ((0:10-T3-S62)) Timeout T203 state=LAPD_STATE_MF_EST
|
2048
|
DLLAPD INFO <0016> lapd_core.c:239 ((0:10-T3-S62)) new state LAPD_STATE_MF_EST -> LAPD_STATE_TIMER_RECOV
|
2049
|
DLLAPD INFO <0016> lapd_core.c:732 ((0:10-T3-S62)) transmit an RR poll command
|
2050
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:10-T3-S62)) TX: fa 07 01 01
|
2051
|
DLLAPD INFO <0016> lapd_core.c:208 ((0:10-T3-S62)) start T200 (timeout=0.300000s)
|
2052
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:10) <= len = 4, sapi(62) tei(3)
|
2053
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:10: RX: f8 07 01 01
|
2054
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:10-T3-S62)) RR received in state LAPD_STATE_TIMER_RECOV
|
2055
|
DLLAPD INFO <0016> lapd_core.c:1348 ((0:10-T3-S62)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
|
2056
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:10-T3-S62)) TX: f8 07 01 01
|
2057
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:10-T3-S62)) lapd_send_i() called from line 1373
|
2058
|
DLLAPD INFO <0016> lapd_core.c:1849 ((0:10-T3-S62)) timer recovery, not sending
|
2059
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:4) <= len = 4, sapi(62) tei(1)
|
2060
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:4: RX: f8 03 01 01
|
2061
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:4-T1-S62)) RR received in state LAPD_STATE_MF_EST
|
2062
|
DLLAPD INFO <0016> lapd_core.c:232 ((0:4-T1-S62)) stop T203
|
2063
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:4-T1-S62)) start T203
|
2064
|
DLLAPD INFO <0016> lapd_core.c:1348 ((0:4-T1-S62)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
|
2065
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:4-T1-S62)) TX: f8 03 01 01
|
2066
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:4-T1-S62)) lapd_send_i() called from line 1373
|
2067
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:10) <= len = 4, sapi(62) tei(3)
|
2068
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:10: RX: fa 07 01 01
|
2069
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:10-T3-S62)) RR received in state LAPD_STATE_TIMER_RECOV
|
2070
|
DLLAPD INFO <0016> lapd_core.c:1364 ((0:10-T3-S62)) RR response with F==1, and we are in timer recovery state, so we leave that state
|
2071
|
DLLAPD INFO <0016> lapd_core.c:224 ((0:10-T3-S62)) stop T200
|
2072
|
DLLAPD INFO <0016> lapd_core.c:239 ((0:10-T3-S62)) new state LAPD_STATE_TIMER_RECOV -> LAPD_STATE_MF_EST
|
2073
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:10-T3-S62)) start T203
|
2074
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:10-T3-S62)) lapd_send_i() called from line 1373
|
2075
|
DLLAPD INFO <0016> lapd_core.c:719 ((0:7-T2-S0)) Timeout T203 state=LAPD_STATE_MF_EST
|
2076
|
DLLAPD INFO <0016> lapd_core.c:239 ((0:7-T2-S0)) new state LAPD_STATE_MF_EST -> LAPD_STATE_TIMER_RECOV
|
2077
|
DLLAPD INFO <0016> lapd_core.c:732 ((0:7-T2-S0)) transmit an RR poll command
|
2078
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:7-T2-S0)) TX: 02 05 01 03
|
2079
|
DLLAPD INFO <0016> lapd_core.c:208 ((0:7-T2-S0)) start T200 (timeout=0.300000s)
|
2080
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:7) <= len = 4, sapi(0) tei(2)
|
2081
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:7: RX: 00 05 01 09
|
2082
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:7-T2-S0)) RR received in state LAPD_STATE_TIMER_RECOV
|
2083
|
DLLAPD INFO <0016> lapd_core.c:1348 ((0:7-T2-S0)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
|
2084
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:7-T2-S0)) TX: 00 05 01 03
|
2085
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:7-T2-S0)) lapd_send_i() called from line 1373
|
2086
|
DLLAPD INFO <0016> lapd_core.c:1849 ((0:7-T2-S0)) timer recovery, not sending
|
2087
|
DLLAPD INFO <0016> lapd_core.c:719 ((0:10-T3-S0)) Timeout T203 state=LAPD_STATE_MF_EST
|
2088
|
DLLAPD INFO <0016> lapd_core.c:239 ((0:10-T3-S0)) new state LAPD_STATE_MF_EST -> LAPD_STATE_TIMER_RECOV
|
2089
|
DLLAPD INFO <0016> lapd_core.c:732 ((0:10-T3-S0)) transmit an RR poll command
|
2090
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:10-T3-S0)) TX: 02 07 01 03
|
2091
|
DLLAPD INFO <0016> lapd_core.c:208 ((0:10-T3-S0)) start T200 (timeout=0.300000s)
|
2092
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:10) <= len = 4, sapi(0) tei(3)
|
2093
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:10: RX: 00 07 01 09
|
2094
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:10-T3-S0)) RR received in state LAPD_STATE_TIMER_RECOV
|
2095
|
DLLAPD INFO <0016> lapd_core.c:1348 ((0:10-T3-S0)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
|
2096
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:10-T3-S0)) TX: 00 07 01 03
|
2097
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:10-T3-S0)) lapd_send_i() called from line 1373
|
2098
|
DLLAPD INFO <0016> lapd_core.c:1849 ((0:10-T3-S0)) timer recovery, not sending
|
2099
|
DLLAPD INFO <0016> lapd_core.c:719 ((0:4-T1-S0)) Timeout T203 state=LAPD_STATE_MF_EST
|
2100
|
DLLAPD INFO <0016> lapd_core.c:239 ((0:4-T1-S0)) new state LAPD_STATE_MF_EST -> LAPD_STATE_TIMER_RECOV
|
2101
|
DLLAPD INFO <0016> lapd_core.c:732 ((0:4-T1-S0)) transmit an RR poll command
|
2102
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:4-T1-S0)) TX: 02 03 01 03
|
2103
|
DLLAPD INFO <0016> lapd_core.c:208 ((0:4-T1-S0)) start T200 (timeout=0.300000s)
|
2104
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:4) <= len = 4, sapi(0) tei(1)
|
2105
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:4: RX: 00 03 01 09
|
2106
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:4-T1-S0)) RR received in state LAPD_STATE_TIMER_RECOV
|
2107
|
DLLAPD INFO <0016> lapd_core.c:1348 ((0:4-T1-S0)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
|
2108
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:4-T1-S0)) TX: 00 03 01 03
|
2109
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:4-T1-S0)) lapd_send_i() called from line 1373
|
2110
|
DLLAPD INFO <0016> lapd_core.c:1849 ((0:4-T1-S0)) timer recovery, not sending
|
2111
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:7) <= len = 4, sapi(0) tei(2)
|
2112
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:7: RX: 02 05 01 09
|
2113
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:7-T2-S0)) RR received in state LAPD_STATE_TIMER_RECOV
|
2114
|
DLLAPD INFO <0016> lapd_core.c:1364 ((0:7-T2-S0)) RR response with F==1, and we are in timer recovery state, so we leave that state
|
2115
|
DLLAPD INFO <0016> lapd_core.c:224 ((0:7-T2-S0)) stop T200
|
2116
|
DLLAPD INFO <0016> lapd_core.c:239 ((0:7-T2-S0)) new state LAPD_STATE_TIMER_RECOV -> LAPD_STATE_MF_EST
|
2117
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:7-T2-S0)) start T203
|
2118
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:7-T2-S0)) lapd_send_i() called from line 1373
|
2119
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:10) <= len = 4, sapi(0) tei(3)
|
2120
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:10: RX: 02 07 01 09
|
2121
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:10-T3-S0)) RR received in state LAPD_STATE_TIMER_RECOV
|
2122
|
DLLAPD INFO <0016> lapd_core.c:1364 ((0:10-T3-S0)) RR response with F==1, and we are in timer recovery state, so we leave that state
|
2123
|
DLLAPD INFO <0016> lapd_core.c:224 ((0:10-T3-S0)) stop T200
|
2124
|
DLLAPD INFO <0016> lapd_core.c:239 ((0:10-T3-S0)) new state LAPD_STATE_TIMER_RECOV -> LAPD_STATE_MF_EST
|
2125
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:10-T3-S0)) start T203
|
2126
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:10-T3-S0)) lapd_send_i() called from line 1373
|
2127
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:4) <= len = 4, sapi(0) tei(1)
|
2128
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:4: RX: 02 03 01 09
|
2129
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:4-T1-S0)) RR received in state LAPD_STATE_TIMER_RECOV
|
2130
|
DLLAPD INFO <0016> lapd_core.c:1364 ((0:4-T1-S0)) RR response with F==1, and we are in timer recovery state, so we leave that state
|
2131
|
DLLAPD INFO <0016> lapd_core.c:224 ((0:4-T1-S0)) stop T200
|
2132
|
DLLAPD INFO <0016> lapd_core.c:239 ((0:4-T1-S0)) new state LAPD_STATE_TIMER_RECOV -> LAPD_STATE_MF_EST
|
2133
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:4-T1-S0)) start T203
|
2134
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:4-T1-S0)) lapd_send_i() called from line 1373
|
2135
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 4, sapi(0) tei(0)
|
2136
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: 00 01 01 17
|
2137
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:1-T0-S0)) RR received in state LAPD_STATE_MF_EST
|
2138
|
DLLAPD INFO <0016> lapd_core.c:232 ((0:1-T0-S0)) stop T203
|
2139
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T0-S0)) start T203
|
2140
|
DLLAPD INFO <0016> lapd_core.c:1348 ((0:1-T0-S0)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
|
2141
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T0-S0)) TX: 00 01 01 11
|
2142
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T0-S0)) lapd_send_i() called from line 1373
|
2143
|
DLLAPD INFO <0016> lapd_core.c:719 ((0:1-T62-S62)) Timeout T203 state=LAPD_STATE_MF_EST
|
2144
|
DLLAPD INFO <0016> lapd_core.c:239 ((0:1-T62-S62)) new state LAPD_STATE_MF_EST -> LAPD_STATE_TIMER_RECOV
|
2145
|
DLLAPD INFO <0016> lapd_core.c:732 ((0:1-T62-S62)) transmit an RR poll command
|
2146
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T62-S62)) TX: fa 7d 01 1b
|
2147
|
DLLAPD INFO <0016> lapd_core.c:208 ((0:1-T62-S62)) start T200 (timeout=0.300000s)
|
2148
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 4, sapi(62) tei(62)
|
2149
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: fa 7d 01 1b
|
2150
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:1-T62-S62)) RR received in state LAPD_STATE_TIMER_RECOV
|
2151
|
DLLAPD INFO <0016> lapd_core.c:1364 ((0:1-T62-S62)) RR response with F==1, and we are in timer recovery state, so we leave that state
|
2152
|
DLLAPD INFO <0016> lapd_core.c:224 ((0:1-T62-S62)) stop T200
|
2153
|
DLLAPD INFO <0016> lapd_core.c:239 ((0:1-T62-S62)) new state LAPD_STATE_TIMER_RECOV -> LAPD_STATE_MF_EST
|
2154
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T62-S62)) start T203
|
2155
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T62-S62)) lapd_send_i() called from line 1373
|
2156
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 4, sapi(62) tei(62)
|
2157
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: f8 7d 01 1b
|
2158
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:1-T62-S62)) RR received in state LAPD_STATE_MF_EST
|
2159
|
DLLAPD INFO <0016> lapd_core.c:232 ((0:1-T62-S62)) stop T203
|
2160
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T62-S62)) start T203
|
2161
|
DLLAPD INFO <0016> lapd_core.c:1348 ((0:1-T62-S62)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
|
2162
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T62-S62)) TX: f8 7d 01 1b
|
2163
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T62-S62)) lapd_send_i() called from line 1373
|
2164
|
DHODEC DEBUG <0009> handover_decision_2.c:1853 (BTS 0) No congestion check: TRX 0 not usable
|
2165
|
DHODEC DEBUG <0009> handover_decision_2.c:163 HO algorithm 2: next periodical congestion check in 10 seconds
|
2166
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:7) <= len = 4, sapi(62) tei(2)
|
2167
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:7: RX: f8 05 01 01
|
2168
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:7-T2-S62)) RR received in state LAPD_STATE_MF_EST
|
2169
|
DLLAPD INFO <0016> lapd_core.c:232 ((0:7-T2-S62)) stop T203
|
2170
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:7-T2-S62)) start T203
|
2171
|
DLLAPD INFO <0016> lapd_core.c:1348 ((0:7-T2-S62)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
|
2172
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:7-T2-S62)) TX: f8 05 01 01
|
2173
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:7-T2-S62)) lapd_send_i() called from line 1373
|
2174
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 4, sapi(62) tei(0)
|
2175
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: f8 01 01 01
|
2176
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:1-T0-S62)) RR received in state LAPD_STATE_MF_EST
|
2177
|
DLLAPD INFO <0016> lapd_core.c:232 ((0:1-T0-S62)) stop T203
|
2178
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T0-S62)) start T203
|
2179
|
DLLAPD INFO <0016> lapd_core.c:1348 ((0:1-T0-S62)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
|
2180
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T0-S62)) TX: f8 01 01 01
|
2181
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T0-S62)) lapd_send_i() called from line 1373
|
2182
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:10) <= len = 4, sapi(62) tei(3)
|
2183
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:10: RX: f8 07 01 01
|
2184
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:10-T3-S62)) RR received in state LAPD_STATE_MF_EST
|
2185
|
DLLAPD INFO <0016> lapd_core.c:232 ((0:10-T3-S62)) stop T203
|
2186
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:10-T3-S62)) start T203
|
2187
|
DLLAPD INFO <0016> lapd_core.c:1348 ((0:10-T3-S62)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
|
2188
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:10-T3-S62)) TX: f8 07 01 01
|
2189
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:10-T3-S62)) lapd_send_i() called from line 1373
|
2190
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:4) <= len = 4, sapi(62) tei(1)
|
2191
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:4: RX: f8 03 01 01
|
2192
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:4-T1-S62)) RR received in state LAPD_STATE_MF_EST
|
2193
|
DLLAPD INFO <0016> lapd_core.c:232 ((0:4-T1-S62)) stop T203
|
2194
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:4-T1-S62)) start T203
|
2195
|
DLLAPD INFO <0016> lapd_core.c:1348 ((0:4-T1-S62)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
|
2196
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:4-T1-S62)) TX: f8 03 01 01
|
2197
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:4-T1-S62)) lapd_send_i() called from line 1373
|
2198
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:7) <= len = 4, sapi(0) tei(2)
|
2199
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:7: RX: 00 05 01 09
|
2200
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:7-T2-S0)) RR received in state LAPD_STATE_MF_EST
|
2201
|
DLLAPD INFO <0016> lapd_core.c:232 ((0:7-T2-S0)) stop T203
|
2202
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:7-T2-S0)) start T203
|
2203
|
DLLAPD INFO <0016> lapd_core.c:1348 ((0:7-T2-S0)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
|
2204
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:7-T2-S0)) TX: 00 05 01 03
|
2205
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:7-T2-S0)) lapd_send_i() called from line 1373
|
2206
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:10) <= len = 4, sapi(0) tei(3)
|
2207
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:10: RX: 00 07 01 09
|
2208
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:10-T3-S0)) RR received in state LAPD_STATE_MF_EST
|
2209
|
DLLAPD INFO <0016> lapd_core.c:232 ((0:10-T3-S0)) stop T203
|
2210
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:10-T3-S0)) start T203
|
2211
|
DLLAPD INFO <0016> lapd_core.c:1348 ((0:10-T3-S0)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
|
2212
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:10-T3-S0)) TX: 00 07 01 03
|
2213
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:10-T3-S0)) lapd_send_i() called from line 1373
|
2214
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:4) <= len = 4, sapi(0) tei(1)
|
2215
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:4: RX: 00 03 01 09
|
2216
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:4-T1-S0)) RR received in state LAPD_STATE_MF_EST
|
2217
|
DLLAPD INFO <0016> lapd_core.c:232 ((0:4-T1-S0)) stop T203
|
2218
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:4-T1-S0)) start T203
|
2219
|
DLLAPD INFO <0016> lapd_core.c:1348 ((0:4-T1-S0)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
|
2220
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:4-T1-S0)) TX: 00 03 01 03
|
2221
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:4-T1-S0)) lapd_send_i() called from line 1373
|
2222
|
DLLAPD INFO <0016> lapd_core.c:719 ((0:1-T0-S0)) Timeout T203 state=LAPD_STATE_MF_EST
|
2223
|
DLLAPD INFO <0016> lapd_core.c:239 ((0:1-T0-S0)) new state LAPD_STATE_MF_EST -> LAPD_STATE_TIMER_RECOV
|
2224
|
DLLAPD INFO <0016> lapd_core.c:732 ((0:1-T0-S0)) transmit an RR poll command
|
2225
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T0-S0)) TX: 02 01 01 11
|
2226
|
DLLAPD INFO <0016> lapd_core.c:208 ((0:1-T0-S0)) start T200 (timeout=0.300000s)
|
2227
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 4, sapi(0) tei(0)
|
2228
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: 00 01 01 17
|
2229
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:1-T0-S0)) RR received in state LAPD_STATE_TIMER_RECOV
|
2230
|
DLLAPD INFO <0016> lapd_core.c:1348 ((0:1-T0-S0)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
|
2231
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T0-S0)) TX: 00 01 01 11
|
2232
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T0-S0)) lapd_send_i() called from line 1373
|
2233
|
DLLAPD INFO <0016> lapd_core.c:1849 ((0:1-T0-S0)) timer recovery, not sending
|
2234
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 4, sapi(0) tei(0)
|
2235
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: 02 01 01 17
|
2236
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:1-T0-S0)) RR received in state LAPD_STATE_TIMER_RECOV
|
2237
|
DLLAPD INFO <0016> lapd_core.c:1364 ((0:1-T0-S0)) RR response with F==1, and we are in timer recovery state, so we leave that state
|
2238
|
DLLAPD INFO <0016> lapd_core.c:224 ((0:1-T0-S0)) stop T200
|
2239
|
DLLAPD INFO <0016> lapd_core.c:239 ((0:1-T0-S0)) new state LAPD_STATE_TIMER_RECOV -> LAPD_STATE_MF_EST
|
2240
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T0-S0)) start T203
|
2241
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T0-S0)) lapd_send_i() called from line 1373
|
2242
|
DLLAPD INFO <0016> lapd_core.c:719 ((0:1-T62-S62)) Timeout T203 state=LAPD_STATE_MF_EST
|
2243
|
DLLAPD INFO <0016> lapd_core.c:239 ((0:1-T62-S62)) new state LAPD_STATE_MF_EST -> LAPD_STATE_TIMER_RECOV
|
2244
|
DLLAPD INFO <0016> lapd_core.c:732 ((0:1-T62-S62)) transmit an RR poll command
|
2245
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T62-S62)) TX: fa 7d 01 1b
|
2246
|
DLLAPD INFO <0016> lapd_core.c:208 ((0:1-T62-S62)) start T200 (timeout=0.300000s)
|
2247
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 4, sapi(62) tei(62)
|
2248
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: fa 7d 01 1b
|
2249
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:1-T62-S62)) RR received in state LAPD_STATE_TIMER_RECOV
|
2250
|
DLLAPD INFO <0016> lapd_core.c:1364 ((0:1-T62-S62)) RR response with F==1, and we are in timer recovery state, so we leave that state
|
2251
|
DLLAPD INFO <0016> lapd_core.c:224 ((0:1-T62-S62)) stop T200
|
2252
|
DLLAPD INFO <0016> lapd_core.c:239 ((0:1-T62-S62)) new state LAPD_STATE_TIMER_RECOV -> LAPD_STATE_MF_EST
|
2253
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T62-S62)) start T203
|
2254
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T62-S62)) lapd_send_i() called from line 1373
|
2255
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 4, sapi(62) tei(62)
|
2256
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: f8 7d 01 1b
|
2257
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:1-T62-S62)) RR received in state LAPD_STATE_MF_EST
|
2258
|
DLLAPD INFO <0016> lapd_core.c:232 ((0:1-T62-S62)) stop T203
|
2259
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T62-S62)) start T203
|
2260
|
DLLAPD INFO <0016> lapd_core.c:1348 ((0:1-T62-S62)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
|
2261
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T62-S62)) TX: f8 7d 01 1b
|
2262
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T62-S62)) lapd_send_i() called from line 1373
|
2263
|
DLGLOBAL INFO <0015> telnet_interface.c:186 Accept()ed new telnet connection r=127.0.0.1:39762<->l=127.0.0.1:4242
|
2264
|
DHODEC DEBUG <0009> handover_decision_2.c:1853 (BTS 0) No congestion check: TRX 0 not usable
|
2265
|
DHODEC DEBUG <0009> handover_decision_2.c:163 HO algorithm 2: next periodical congestion check in 10 seconds
|
2266
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:7) <= len = 4, sapi(62) tei(2)
|
2267
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:7: RX: f8 05 01 01
|
2268
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:7-T2-S62)) RR received in state LAPD_STATE_MF_EST
|
2269
|
DLLAPD INFO <0016> lapd_core.c:232 ((0:7-T2-S62)) stop T203
|
2270
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:7-T2-S62)) start T203
|
2271
|
DLLAPD INFO <0016> lapd_core.c:1348 ((0:7-T2-S62)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
|
2272
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:7-T2-S62)) TX: f8 05 01 01
|
2273
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:7-T2-S62)) lapd_send_i() called from line 1373
|
2274
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 4, sapi(62) tei(0)
|
2275
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: f8 01 01 01
|
2276
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:1-T0-S62)) RR received in state LAPD_STATE_MF_EST
|
2277
|
DLLAPD INFO <0016> lapd_core.c:232 ((0:1-T0-S62)) stop T203
|
2278
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T0-S62)) start T203
|
2279
|
DLLAPD INFO <0016> lapd_core.c:1348 ((0:1-T0-S62)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
|
2280
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T0-S62)) TX: f8 01 01 01
|
2281
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T0-S62)) lapd_send_i() called from line 1373
|
2282
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:10) <= len = 4, sapi(62) tei(3)
|
2283
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:10: RX: f8 07 01 01
|
2284
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:10-T3-S62)) RR received in state LAPD_STATE_MF_EST
|
2285
|
DLLAPD INFO <0016> lapd_core.c:232 ((0:10-T3-S62)) stop T203
|
2286
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:10-T3-S62)) start T203
|
2287
|
DLLAPD INFO <0016> lapd_core.c:1348 ((0:10-T3-S62)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
|
2288
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:10-T3-S62)) TX: f8 07 01 01
|
2289
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:10-T3-S62)) lapd_send_i() called from line 1373
|
2290
|
DLLAPD INFO <0016> lapd_core.c:719 ((0:4-T1-S62)) Timeout T203 state=LAPD_STATE_MF_EST
|
2291
|
DLLAPD INFO <0016> lapd_core.c:239 ((0:4-T1-S62)) new state LAPD_STATE_MF_EST -> LAPD_STATE_TIMER_RECOV
|
2292
|
DLLAPD INFO <0016> lapd_core.c:732 ((0:4-T1-S62)) transmit an RR poll command
|
2293
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:4-T1-S62)) TX: fa 03 01 01
|
2294
|
DLLAPD INFO <0016> lapd_core.c:208 ((0:4-T1-S62)) start T200 (timeout=0.300000s)
|
2295
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:4) <= len = 4, sapi(62) tei(1)
|
2296
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:4: RX: f8 03 01 01
|
2297
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:4-T1-S62)) RR received in state LAPD_STATE_TIMER_RECOV
|
2298
|
DLLAPD INFO <0016> lapd_core.c:1348 ((0:4-T1-S62)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
|
2299
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:4-T1-S62)) TX: f8 03 01 01
|
2300
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:4-T1-S62)) lapd_send_i() called from line 1373
|
2301
|
DLLAPD INFO <0016> lapd_core.c:1849 ((0:4-T1-S62)) timer recovery, not sending
|
2302
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:4) <= len = 4, sapi(62) tei(1)
|
2303
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:4: RX: fa 03 01 01
|
2304
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:4-T1-S62)) RR received in state LAPD_STATE_TIMER_RECOV
|
2305
|
DLLAPD INFO <0016> lapd_core.c:1364 ((0:4-T1-S62)) RR response with F==1, and we are in timer recovery state, so we leave that state
|
2306
|
DLLAPD INFO <0016> lapd_core.c:224 ((0:4-T1-S62)) stop T200
|
2307
|
DLLAPD INFO <0016> lapd_core.c:239 ((0:4-T1-S62)) new state LAPD_STATE_TIMER_RECOV -> LAPD_STATE_MF_EST
|
2308
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:4-T1-S62)) start T203
|
2309
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:4-T1-S62)) lapd_send_i() called from line 1373
|
2310
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:7) <= len = 4, sapi(0) tei(2)
|
2311
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:7: RX: 00 05 01 09
|
2312
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:7-T2-S0)) RR received in state LAPD_STATE_MF_EST
|
2313
|
DLLAPD INFO <0016> lapd_core.c:232 ((0:7-T2-S0)) stop T203
|
2314
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:7-T2-S0)) start T203
|
2315
|
DLLAPD INFO <0016> lapd_core.c:1348 ((0:7-T2-S0)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
|
2316
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:7-T2-S0)) TX: 00 05 01 03
|
2317
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:7-T2-S0)) lapd_send_i() called from line 1373
|
2318
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:10) <= len = 4, sapi(0) tei(3)
|
2319
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:10: RX: 00 07 01 09
|
2320
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:10-T3-S0)) RR received in state LAPD_STATE_MF_EST
|
2321
|
DLLAPD INFO <0016> lapd_core.c:232 ((0:10-T3-S0)) stop T203
|
2322
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:10-T3-S0)) start T203
|
2323
|
DLLAPD INFO <0016> lapd_core.c:1348 ((0:10-T3-S0)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
|
2324
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:10-T3-S0)) TX: 00 07 01 03
|
2325
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:10-T3-S0)) lapd_send_i() called from line 1373
|
2326
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:4) <= len = 4, sapi(0) tei(1)
|
2327
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:4: RX: 00 03 01 09
|
2328
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:4-T1-S0)) RR received in state LAPD_STATE_MF_EST
|
2329
|
DLLAPD INFO <0016> lapd_core.c:232 ((0:4-T1-S0)) stop T203
|
2330
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:4-T1-S0)) start T203
|
2331
|
DLLAPD INFO <0016> lapd_core.c:1348 ((0:4-T1-S0)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
|
2332
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:4-T1-S0)) TX: 00 03 01 03
|
2333
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:4-T1-S0)) lapd_send_i() called from line 1373
|
2334
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 4, sapi(0) tei(0)
|
2335
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: 00 01 01 17
|
2336
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:1-T0-S0)) RR received in state LAPD_STATE_MF_EST
|
2337
|
DLLAPD INFO <0016> lapd_core.c:232 ((0:1-T0-S0)) stop T203
|
2338
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T0-S0)) start T203
|
2339
|
DLLAPD INFO <0016> lapd_core.c:1348 ((0:1-T0-S0)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
|
2340
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T0-S0)) TX: 00 01 01 11
|
2341
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T0-S0)) lapd_send_i() called from line 1373
|
2342
|
DLLAPD INFO <0016> lapd_core.c:719 ((0:1-T62-S62)) Timeout T203 state=LAPD_STATE_MF_EST
|
2343
|
DLLAPD INFO <0016> lapd_core.c:239 ((0:1-T62-S62)) new state LAPD_STATE_MF_EST -> LAPD_STATE_TIMER_RECOV
|
2344
|
DLLAPD INFO <0016> lapd_core.c:732 ((0:1-T62-S62)) transmit an RR poll command
|
2345
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T62-S62)) TX: fa 7d 01 1b
|
2346
|
DLLAPD INFO <0016> lapd_core.c:208 ((0:1-T62-S62)) start T200 (timeout=0.300000s)
|
2347
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 4, sapi(62) tei(62)
|
2348
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: fa 7d 01 1b
|
2349
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:1-T62-S62)) RR received in state LAPD_STATE_TIMER_RECOV
|
2350
|
DLLAPD INFO <0016> lapd_core.c:1364 ((0:1-T62-S62)) RR response with F==1, and we are in timer recovery state, so we leave that state
|
2351
|
DLLAPD INFO <0016> lapd_core.c:224 ((0:1-T62-S62)) stop T200
|
2352
|
DLLAPD INFO <0016> lapd_core.c:239 ((0:1-T62-S62)) new state LAPD_STATE_TIMER_RECOV -> LAPD_STATE_MF_EST
|
2353
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T62-S62)) start T203
|
2354
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T62-S62)) lapd_send_i() called from line 1373
|
2355
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 4, sapi(62) tei(62)
|
2356
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: f8 7d 01 1b
|
2357
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:1-T62-S62)) RR received in state LAPD_STATE_MF_EST
|
2358
|
DLLAPD INFO <0016> lapd_core.c:232 ((0:1-T62-S62)) stop T203
|
2359
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T62-S62)) start T203
|
2360
|
DLLAPD INFO <0016> lapd_core.c:1348 ((0:1-T62-S62)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
|
2361
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T62-S62)) TX: f8 7d 01 1b
|
2362
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T62-S62)) lapd_send_i() called from line 1373
|
2363
|
DHODEC DEBUG <0009> handover_decision_2.c:1853 (BTS 0) No congestion check: TRX 0 not usable
|
2364
|
DHODEC DEBUG <0009> handover_decision_2.c:163 HO algorithm 2: next periodical congestion check in 10 seconds
|
2365
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:7) <= len = 4, sapi(62) tei(2)
|
2366
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:7: RX: f8 05 01 01
|
2367
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:7-T2-S62)) RR received in state LAPD_STATE_MF_EST
|
2368
|
DLLAPD INFO <0016> lapd_core.c:232 ((0:7-T2-S62)) stop T203
|
2369
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:7-T2-S62)) start T203
|
2370
|
DLLAPD INFO <0016> lapd_core.c:1348 ((0:7-T2-S62)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
|
2371
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:7-T2-S62)) TX: f8 05 01 01
|
2372
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:7-T2-S62)) lapd_send_i() called from line 1373
|
2373
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 4, sapi(62) tei(0)
|
2374
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: f8 01 01 01
|
2375
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:1-T0-S62)) RR received in state LAPD_STATE_MF_EST
|
2376
|
DLLAPD INFO <0016> lapd_core.c:232 ((0:1-T0-S62)) stop T203
|
2377
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T0-S62)) start T203
|
2378
|
DLLAPD INFO <0016> lapd_core.c:1348 ((0:1-T0-S62)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
|
2379
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T0-S62)) TX: f8 01 01 01
|
2380
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T0-S62)) lapd_send_i() called from line 1373
|
2381
|
DLLAPD INFO <0016> lapd_core.c:719 ((0:10-T3-S62)) Timeout T203 state=LAPD_STATE_MF_EST
|
2382
|
DLLAPD INFO <0016> lapd_core.c:239 ((0:10-T3-S62)) new state LAPD_STATE_MF_EST -> LAPD_STATE_TIMER_RECOV
|
2383
|
DLLAPD INFO <0016> lapd_core.c:732 ((0:10-T3-S62)) transmit an RR poll command
|
2384
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:10-T3-S62)) TX: fa 07 01 01
|
2385
|
DLLAPD INFO <0016> lapd_core.c:208 ((0:10-T3-S62)) start T200 (timeout=0.300000s)
|
2386
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:10) <= len = 4, sapi(62) tei(3)
|
2387
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:10: RX: f8 07 01 01
|
2388
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:10-T3-S62)) RR received in state LAPD_STATE_TIMER_RECOV
|
2389
|
DLLAPD INFO <0016> lapd_core.c:1348 ((0:10-T3-S62)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
|
2390
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:10-T3-S62)) TX: f8 07 01 01
|
2391
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:10-T3-S62)) lapd_send_i() called from line 1373
|
2392
|
DLLAPD INFO <0016> lapd_core.c:1849 ((0:10-T3-S62)) timer recovery, not sending
|
2393
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:4) <= len = 4, sapi(62) tei(1)
|
2394
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:4: RX: f8 03 01 01
|
2395
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:4-T1-S62)) RR received in state LAPD_STATE_MF_EST
|
2396
|
DLLAPD INFO <0016> lapd_core.c:232 ((0:4-T1-S62)) stop T203
|
2397
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:4-T1-S62)) start T203
|
2398
|
DLLAPD INFO <0016> lapd_core.c:1348 ((0:4-T1-S62)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
|
2399
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:4-T1-S62)) TX: f8 03 01 01
|
2400
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:4-T1-S62)) lapd_send_i() called from line 1373
|
2401
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:10) <= len = 4, sapi(62) tei(3)
|
2402
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:10: RX: fa 07 01 01
|
2403
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:10-T3-S62)) RR received in state LAPD_STATE_TIMER_RECOV
|
2404
|
DLLAPD INFO <0016> lapd_core.c:1364 ((0:10-T3-S62)) RR response with F==1, and we are in timer recovery state, so we leave that state
|
2405
|
DLLAPD INFO <0016> lapd_core.c:224 ((0:10-T3-S62)) stop T200
|
2406
|
DLLAPD INFO <0016> lapd_core.c:239 ((0:10-T3-S62)) new state LAPD_STATE_TIMER_RECOV -> LAPD_STATE_MF_EST
|
2407
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:10-T3-S62)) start T203
|
2408
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:10-T3-S62)) lapd_send_i() called from line 1373
|
2409
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:7) <= len = 4, sapi(0) tei(2)
|
2410
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:7: RX: 00 05 01 09
|
2411
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:7-T2-S0)) RR received in state LAPD_STATE_MF_EST
|
2412
|
DLLAPD INFO <0016> lapd_core.c:232 ((0:7-T2-S0)) stop T203
|
2413
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:7-T2-S0)) start T203
|
2414
|
DLLAPD INFO <0016> lapd_core.c:1348 ((0:7-T2-S0)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
|
2415
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:7-T2-S0)) TX: 00 05 01 03
|
2416
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:7-T2-S0)) lapd_send_i() called from line 1373
|
2417
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:10) <= len = 4, sapi(0) tei(3)
|
2418
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:10: RX: 00 07 01 09
|
2419
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:10-T3-S0)) RR received in state LAPD_STATE_MF_EST
|
2420
|
DLLAPD INFO <0016> lapd_core.c:232 ((0:10-T3-S0)) stop T203
|
2421
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:10-T3-S0)) start T203
|
2422
|
DLLAPD INFO <0016> lapd_core.c:1348 ((0:10-T3-S0)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
|
2423
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:10-T3-S0)) TX: 00 07 01 03
|
2424
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:10-T3-S0)) lapd_send_i() called from line 1373
|
2425
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:4) <= len = 4, sapi(0) tei(1)
|
2426
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:4: RX: 00 03 01 09
|
2427
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:4-T1-S0)) RR received in state LAPD_STATE_MF_EST
|
2428
|
DLLAPD INFO <0016> lapd_core.c:232 ((0:4-T1-S0)) stop T203
|
2429
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:4-T1-S0)) start T203
|
2430
|
DLLAPD INFO <0016> lapd_core.c:1348 ((0:4-T1-S0)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
|
2431
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:4-T1-S0)) TX: 00 03 01 03
|
2432
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:4-T1-S0)) lapd_send_i() called from line 1373
|
2433
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 4, sapi(0) tei(0)
|
2434
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: 00 01 01 17
|
2435
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:1-T0-S0)) RR received in state LAPD_STATE_MF_EST
|
2436
|
DLLAPD INFO <0016> lapd_core.c:232 ((0:1-T0-S0)) stop T203
|
2437
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T0-S0)) start T203
|
2438
|
DLLAPD INFO <0016> lapd_core.c:1348 ((0:1-T0-S0)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
|
2439
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T0-S0)) TX: 00 01 01 11
|
2440
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T0-S0)) lapd_send_i() called from line 1373
|
2441
|
DLLAPD INFO <0016> lapd_core.c:719 ((0:1-T62-S62)) Timeout T203 state=LAPD_STATE_MF_EST
|
2442
|
DLLAPD INFO <0016> lapd_core.c:239 ((0:1-T62-S62)) new state LAPD_STATE_MF_EST -> LAPD_STATE_TIMER_RECOV
|
2443
|
DLLAPD INFO <0016> lapd_core.c:732 ((0:1-T62-S62)) transmit an RR poll command
|
2444
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T62-S62)) TX: fa 7d 01 1b
|
2445
|
DLLAPD INFO <0016> lapd_core.c:208 ((0:1-T62-S62)) start T200 (timeout=0.300000s)
|
2446
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 4, sapi(62) tei(62)
|
2447
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: fa 7d 01 1b
|
2448
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:1-T62-S62)) RR received in state LAPD_STATE_TIMER_RECOV
|
2449
|
DLLAPD INFO <0016> lapd_core.c:1364 ((0:1-T62-S62)) RR response with F==1, and we are in timer recovery state, so we leave that state
|
2450
|
DLLAPD INFO <0016> lapd_core.c:224 ((0:1-T62-S62)) stop T200
|
2451
|
DLLAPD INFO <0016> lapd_core.c:239 ((0:1-T62-S62)) new state LAPD_STATE_TIMER_RECOV -> LAPD_STATE_MF_EST
|
2452
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T62-S62)) start T203
|
2453
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T62-S62)) lapd_send_i() called from line 1373
|
2454
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 4, sapi(62) tei(62)
|
2455
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: f8 7d 01 1b
|
2456
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:1-T62-S62)) RR received in state LAPD_STATE_MF_EST
|
2457
|
DLLAPD INFO <0016> lapd_core.c:232 ((0:1-T62-S62)) stop T203
|
2458
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T62-S62)) start T203
|
2459
|
DLLAPD INFO <0016> lapd_core.c:1348 ((0:1-T62-S62)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
|
2460
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T62-S62)) TX: f8 7d 01 1b
|
2461
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T62-S62)) lapd_send_i() called from line 1373
|
2462
|
DHODEC DEBUG <0009> handover_decision_2.c:1853 (BTS 0) No congestion check: TRX 0 not usable
|
2463
|
DHODEC DEBUG <0009> handover_decision_2.c:163 HO algorithm 2: next periodical congestion check in 10 seconds
|
2464
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:7) <= len = 4, sapi(62) tei(2)
|
2465
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:7: RX: f8 05 01 01
|
2466
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:7-T2-S62)) RR received in state LAPD_STATE_MF_EST
|
2467
|
DLLAPD INFO <0016> lapd_core.c:232 ((0:7-T2-S62)) stop T203
|
2468
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:7-T2-S62)) start T203
|
2469
|
DLLAPD INFO <0016> lapd_core.c:1348 ((0:7-T2-S62)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
|
2470
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:7-T2-S62)) TX: f8 05 01 01
|
2471
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:7-T2-S62)) lapd_send_i() called from line 1373
|
2472
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 4, sapi(62) tei(0)
|
2473
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: f8 01 01 01
|
2474
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:1-T0-S62)) RR received in state LAPD_STATE_MF_EST
|
2475
|
DLLAPD INFO <0016> lapd_core.c:232 ((0:1-T0-S62)) stop T203
|
2476
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T0-S62)) start T203
|
2477
|
DLLAPD INFO <0016> lapd_core.c:1348 ((0:1-T0-S62)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
|
2478
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T0-S62)) TX: f8 01 01 01
|
2479
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T0-S62)) lapd_send_i() called from line 1373
|
2480
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:10) <= len = 4, sapi(62) tei(3)
|
2481
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:10: RX: f8 07 01 01
|
2482
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:10-T3-S62)) RR received in state LAPD_STATE_MF_EST
|
2483
|
DLLAPD INFO <0016> lapd_core.c:232 ((0:10-T3-S62)) stop T203
|
2484
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:10-T3-S62)) start T203
|
2485
|
DLLAPD INFO <0016> lapd_core.c:1348 ((0:10-T3-S62)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
|
2486
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:10-T3-S62)) TX: f8 07 01 01
|
2487
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:10-T3-S62)) lapd_send_i() called from line 1373
|
2488
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:4) <= len = 4, sapi(62) tei(1)
|
2489
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:4: RX: f8 03 01 01
|
2490
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:4-T1-S62)) RR received in state LAPD_STATE_MF_EST
|
2491
|
DLLAPD INFO <0016> lapd_core.c:232 ((0:4-T1-S62)) stop T203
|
2492
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:4-T1-S62)) start T203
|
2493
|
DLLAPD INFO <0016> lapd_core.c:1348 ((0:4-T1-S62)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
|
2494
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:4-T1-S62)) TX: f8 03 01 01
|
2495
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:4-T1-S62)) lapd_send_i() called from line 1373
|
2496
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:7) <= len = 4, sapi(0) tei(2)
|
2497
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:7: RX: 00 05 01 09
|
2498
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:7-T2-S0)) RR received in state LAPD_STATE_MF_EST
|
2499
|
DLLAPD INFO <0016> lapd_core.c:232 ((0:7-T2-S0)) stop T203
|
2500
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:7-T2-S0)) start T203
|
2501
|
DLLAPD INFO <0016> lapd_core.c:1348 ((0:7-T2-S0)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
|
2502
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:7-T2-S0)) TX: 00 05 01 03
|
2503
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:7-T2-S0)) lapd_send_i() called from line 1373
|
2504
|
DLLAPD INFO <0016> lapd_core.c:719 ((0:10-T3-S0)) Timeout T203 state=LAPD_STATE_MF_EST
|
2505
|
DLLAPD INFO <0016> lapd_core.c:239 ((0:10-T3-S0)) new state LAPD_STATE_MF_EST -> LAPD_STATE_TIMER_RECOV
|
2506
|
DLLAPD INFO <0016> lapd_core.c:732 ((0:10-T3-S0)) transmit an RR poll command
|
2507
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:10-T3-S0)) TX: 02 07 01 03
|
2508
|
DLLAPD INFO <0016> lapd_core.c:208 ((0:10-T3-S0)) start T200 (timeout=0.300000s)
|
2509
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:10) <= len = 4, sapi(0) tei(3)
|
2510
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:10: RX: 00 07 01 09
|
2511
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:10-T3-S0)) RR received in state LAPD_STATE_TIMER_RECOV
|
2512
|
DLLAPD INFO <0016> lapd_core.c:1348 ((0:10-T3-S0)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
|
2513
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:10-T3-S0)) TX: 00 07 01 03
|
2514
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:10-T3-S0)) lapd_send_i() called from line 1373
|
2515
|
DLLAPD INFO <0016> lapd_core.c:1849 ((0:10-T3-S0)) timer recovery, not sending
|
2516
|
DLLAPD INFO <0016> lapd_core.c:719 ((0:4-T1-S0)) Timeout T203 state=LAPD_STATE_MF_EST
|
2517
|
DLLAPD INFO <0016> lapd_core.c:239 ((0:4-T1-S0)) new state LAPD_STATE_MF_EST -> LAPD_STATE_TIMER_RECOV
|
2518
|
DLLAPD INFO <0016> lapd_core.c:732 ((0:4-T1-S0)) transmit an RR poll command
|
2519
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:4-T1-S0)) TX: 02 03 01 03
|
2520
|
DLLAPD INFO <0016> lapd_core.c:208 ((0:4-T1-S0)) start T200 (timeout=0.300000s)
|
2521
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:4) <= len = 4, sapi(0) tei(1)
|
2522
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:4: RX: 00 03 01 09
|
2523
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:4-T1-S0)) RR received in state LAPD_STATE_TIMER_RECOV
|
2524
|
DLLAPD INFO <0016> lapd_core.c:1348 ((0:4-T1-S0)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
|
2525
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:4-T1-S0)) TX: 00 03 01 03
|
2526
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:4-T1-S0)) lapd_send_i() called from line 1373
|
2527
|
DLLAPD INFO <0016> lapd_core.c:1849 ((0:4-T1-S0)) timer recovery, not sending
|
2528
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:10) <= len = 4, sapi(0) tei(3)
|
2529
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:10: RX: 02 07 01 09
|
2530
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:10-T3-S0)) RR received in state LAPD_STATE_TIMER_RECOV
|
2531
|
DLLAPD INFO <0016> lapd_core.c:1364 ((0:10-T3-S0)) RR response with F==1, and we are in timer recovery state, so we leave that state
|
2532
|
DLLAPD INFO <0016> lapd_core.c:224 ((0:10-T3-S0)) stop T200
|
2533
|
DLLAPD INFO <0016> lapd_core.c:239 ((0:10-T3-S0)) new state LAPD_STATE_TIMER_RECOV -> LAPD_STATE_MF_EST
|
2534
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:10-T3-S0)) start T203
|
2535
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:10-T3-S0)) lapd_send_i() called from line 1373
|
2536
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:4) <= len = 4, sapi(0) tei(1)
|
2537
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:4: RX: 02 03 01 09
|
2538
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:4-T1-S0)) RR received in state LAPD_STATE_TIMER_RECOV
|
2539
|
DLLAPD INFO <0016> lapd_core.c:1364 ((0:4-T1-S0)) RR response with F==1, and we are in timer recovery state, so we leave that state
|
2540
|
DLLAPD INFO <0016> lapd_core.c:224 ((0:4-T1-S0)) stop T200
|
2541
|
DLLAPD INFO <0016> lapd_core.c:239 ((0:4-T1-S0)) new state LAPD_STATE_TIMER_RECOV -> LAPD_STATE_MF_EST
|
2542
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:4-T1-S0)) start T203
|
2543
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:4-T1-S0)) lapd_send_i() called from line 1373
|
2544
|
DLLAPD INFO <0016> lapd_core.c:719 ((0:1-T0-S0)) Timeout T203 state=LAPD_STATE_MF_EST
|
2545
|
DLLAPD INFO <0016> lapd_core.c:239 ((0:1-T0-S0)) new state LAPD_STATE_MF_EST -> LAPD_STATE_TIMER_RECOV
|
2546
|
DLLAPD INFO <0016> lapd_core.c:732 ((0:1-T0-S0)) transmit an RR poll command
|
2547
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T0-S0)) TX: 02 01 01 11
|
2548
|
DLLAPD INFO <0016> lapd_core.c:208 ((0:1-T0-S0)) start T200 (timeout=0.300000s)
|
2549
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 4, sapi(0) tei(0)
|
2550
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: 00 01 01 17
|
2551
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:1-T0-S0)) RR received in state LAPD_STATE_TIMER_RECOV
|
2552
|
DLLAPD INFO <0016> lapd_core.c:1348 ((0:1-T0-S0)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
|
2553
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T0-S0)) TX: 00 01 01 11
|
2554
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T0-S0)) lapd_send_i() called from line 1373
|
2555
|
DLLAPD INFO <0016> lapd_core.c:1849 ((0:1-T0-S0)) timer recovery, not sending
|
2556
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 4, sapi(0) tei(0)
|
2557
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: 02 01 01 17
|
2558
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:1-T0-S0)) RR received in state LAPD_STATE_TIMER_RECOV
|
2559
|
DLLAPD INFO <0016> lapd_core.c:1364 ((0:1-T0-S0)) RR response with F==1, and we are in timer recovery state, so we leave that state
|
2560
|
DLLAPD INFO <0016> lapd_core.c:224 ((0:1-T0-S0)) stop T200
|
2561
|
DLLAPD INFO <0016> lapd_core.c:239 ((0:1-T0-S0)) new state LAPD_STATE_TIMER_RECOV -> LAPD_STATE_MF_EST
|
2562
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T0-S0)) start T203
|
2563
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T0-S0)) lapd_send_i() called from line 1373
|
2564
|
DLLAPD INFO <0016> lapd_core.c:719 ((0:1-T62-S62)) Timeout T203 state=LAPD_STATE_MF_EST
|
2565
|
DLLAPD INFO <0016> lapd_core.c:239 ((0:1-T62-S62)) new state LAPD_STATE_MF_EST -> LAPD_STATE_TIMER_RECOV
|
2566
|
DLLAPD INFO <0016> lapd_core.c:732 ((0:1-T62-S62)) transmit an RR poll command
|
2567
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T62-S62)) TX: fa 7d 01 1b
|
2568
|
DLLAPD INFO <0016> lapd_core.c:208 ((0:1-T62-S62)) start T200 (timeout=0.300000s)
|
2569
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 4, sapi(62) tei(62)
|
2570
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: fa 7d 01 1b
|
2571
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:1-T62-S62)) RR received in state LAPD_STATE_TIMER_RECOV
|
2572
|
DLLAPD INFO <0016> lapd_core.c:1364 ((0:1-T62-S62)) RR response with F==1, and we are in timer recovery state, so we leave that state
|
2573
|
DLLAPD INFO <0016> lapd_core.c:224 ((0:1-T62-S62)) stop T200
|
2574
|
DLLAPD INFO <0016> lapd_core.c:239 ((0:1-T62-S62)) new state LAPD_STATE_TIMER_RECOV -> LAPD_STATE_MF_EST
|
2575
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T62-S62)) start T203
|
2576
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T62-S62)) lapd_send_i() called from line 1373
|
2577
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 4, sapi(62) tei(62)
|
2578
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: f8 7d 01 1b
|
2579
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:1-T62-S62)) RR received in state LAPD_STATE_MF_EST
|
2580
|
DLLAPD INFO <0016> lapd_core.c:232 ((0:1-T62-S62)) stop T203
|
2581
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T62-S62)) start T203
|
2582
|
DLLAPD INFO <0016> lapd_core.c:1348 ((0:1-T62-S62)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
|
2583
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T62-S62)) TX: f8 7d 01 1b
|
2584
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T62-S62)) lapd_send_i() called from line 1373
|
2585
|
DHODEC DEBUG <0009> handover_decision_2.c:1853 (BTS 0) No congestion check: TRX 0 not usable
|
2586
|
DHODEC DEBUG <0009> handover_decision_2.c:163 HO algorithm 2: next periodical congestion check in 10 seconds
|
2587
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:7) <= len = 4, sapi(62) tei(2)
|
2588
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:7: RX: f8 05 01 01
|
2589
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:7-T2-S62)) RR received in state LAPD_STATE_MF_EST
|
2590
|
DLLAPD INFO <0016> lapd_core.c:232 ((0:7-T2-S62)) stop T203
|
2591
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:7-T2-S62)) start T203
|
2592
|
DLLAPD INFO <0016> lapd_core.c:1348 ((0:7-T2-S62)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
|
2593
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:7-T2-S62)) TX: f8 05 01 01
|
2594
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:7-T2-S62)) lapd_send_i() called from line 1373
|
2595
|
DLLAPD INFO <0016> lapd_core.c:719 ((0:1-T0-S62)) Timeout T203 state=LAPD_STATE_MF_EST
|
2596
|
DLLAPD INFO <0016> lapd_core.c:239 ((0:1-T0-S62)) new state LAPD_STATE_MF_EST -> LAPD_STATE_TIMER_RECOV
|
2597
|
DLLAPD INFO <0016> lapd_core.c:732 ((0:1-T0-S62)) transmit an RR poll command
|
2598
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T0-S62)) TX: fa 01 01 01
|
2599
|
DLLAPD INFO <0016> lapd_core.c:208 ((0:1-T0-S62)) start T200 (timeout=0.300000s)
|
2600
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 4, sapi(62) tei(0)
|
2601
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: f8 01 01 01
|
2602
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:1-T0-S62)) RR received in state LAPD_STATE_TIMER_RECOV
|
2603
|
DLLAPD INFO <0016> lapd_core.c:1348 ((0:1-T0-S62)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
|
2604
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T0-S62)) TX: f8 01 01 01
|
2605
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T0-S62)) lapd_send_i() called from line 1373
|
2606
|
DLLAPD INFO <0016> lapd_core.c:1849 ((0:1-T0-S62)) timer recovery, not sending
|
2607
|
DLLAPD INFO <0016> lapd_core.c:719 ((0:10-T3-S62)) Timeout T203 state=LAPD_STATE_MF_EST
|
2608
|
DLLAPD INFO <0016> lapd_core.c:239 ((0:10-T3-S62)) new state LAPD_STATE_MF_EST -> LAPD_STATE_TIMER_RECOV
|
2609
|
DLLAPD INFO <0016> lapd_core.c:732 ((0:10-T3-S62)) transmit an RR poll command
|
2610
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:10-T3-S62)) TX: fa 07 01 01
|
2611
|
DLLAPD INFO <0016> lapd_core.c:208 ((0:10-T3-S62)) start T200 (timeout=0.300000s)
|
2612
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:10) <= len = 4, sapi(62) tei(3)
|
2613
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:10: RX: f8 07 01 01
|
2614
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:10-T3-S62)) RR received in state LAPD_STATE_TIMER_RECOV
|
2615
|
DLLAPD INFO <0016> lapd_core.c:1348 ((0:10-T3-S62)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
|
2616
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:10-T3-S62)) TX: f8 07 01 01
|
2617
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:10-T3-S62)) lapd_send_i() called from line 1373
|
2618
|
DLLAPD INFO <0016> lapd_core.c:1849 ((0:10-T3-S62)) timer recovery, not sending
|
2619
|
DLLAPD INFO <0016> lapd_core.c:719 ((0:4-T1-S62)) Timeout T203 state=LAPD_STATE_MF_EST
|
2620
|
DLLAPD INFO <0016> lapd_core.c:239 ((0:4-T1-S62)) new state LAPD_STATE_MF_EST -> LAPD_STATE_TIMER_RECOV
|
2621
|
DLLAPD INFO <0016> lapd_core.c:732 ((0:4-T1-S62)) transmit an RR poll command
|
2622
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:4-T1-S62)) TX: fa 03 01 01
|
2623
|
DLLAPD INFO <0016> lapd_core.c:208 ((0:4-T1-S62)) start T200 (timeout=0.300000s)
|
2624
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:4) <= len = 4, sapi(62) tei(1)
|
2625
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:4: RX: f8 03 01 01
|
2626
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:4-T1-S62)) RR received in state LAPD_STATE_TIMER_RECOV
|
2627
|
DLLAPD INFO <0016> lapd_core.c:1348 ((0:4-T1-S62)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
|
2628
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:4-T1-S62)) TX: f8 03 01 01
|
2629
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:4-T1-S62)) lapd_send_i() called from line 1373
|
2630
|
DLLAPD INFO <0016> lapd_core.c:1849 ((0:4-T1-S62)) timer recovery, not sending
|
2631
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 4, sapi(62) tei(0)
|
2632
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: fa 01 01 01
|
2633
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:1-T0-S62)) RR received in state LAPD_STATE_TIMER_RECOV
|
2634
|
DLLAPD INFO <0016> lapd_core.c:1364 ((0:1-T0-S62)) RR response with F==1, and we are in timer recovery state, so we leave that state
|
2635
|
DLLAPD INFO <0016> lapd_core.c:224 ((0:1-T0-S62)) stop T200
|
2636
|
DLLAPD INFO <0016> lapd_core.c:239 ((0:1-T0-S62)) new state LAPD_STATE_TIMER_RECOV -> LAPD_STATE_MF_EST
|
2637
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T0-S62)) start T203
|
2638
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T0-S62)) lapd_send_i() called from line 1373
|
2639
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:10) <= len = 4, sapi(62) tei(3)
|
2640
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:10: RX: fa 07 01 01
|
2641
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:10-T3-S62)) RR received in state LAPD_STATE_TIMER_RECOV
|
2642
|
DLLAPD INFO <0016> lapd_core.c:1364 ((0:10-T3-S62)) RR response with F==1, and we are in timer recovery state, so we leave that state
|
2643
|
DLLAPD INFO <0016> lapd_core.c:224 ((0:10-T3-S62)) stop T200
|
2644
|
DLLAPD INFO <0016> lapd_core.c:239 ((0:10-T3-S62)) new state LAPD_STATE_TIMER_RECOV -> LAPD_STATE_MF_EST
|
2645
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:10-T3-S62)) start T203
|
2646
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:10-T3-S62)) lapd_send_i() called from line 1373
|
2647
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:4) <= len = 4, sapi(62) tei(1)
|
2648
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:4: RX: fa 03 01 01
|
2649
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:4-T1-S62)) RR received in state LAPD_STATE_TIMER_RECOV
|
2650
|
DLLAPD INFO <0016> lapd_core.c:1364 ((0:4-T1-S62)) RR response with F==1, and we are in timer recovery state, so we leave that state
|
2651
|
DLLAPD INFO <0016> lapd_core.c:224 ((0:4-T1-S62)) stop T200
|
2652
|
DLLAPD INFO <0016> lapd_core.c:239 ((0:4-T1-S62)) new state LAPD_STATE_TIMER_RECOV -> LAPD_STATE_MF_EST
|
2653
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:4-T1-S62)) start T203
|
2654
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:4-T1-S62)) lapd_send_i() called from line 1373
|
2655
|
DLLAPD INFO <0016> lapd_core.c:719 ((0:7-T2-S0)) Timeout T203 state=LAPD_STATE_MF_EST
|
2656
|
DLLAPD INFO <0016> lapd_core.c:239 ((0:7-T2-S0)) new state LAPD_STATE_MF_EST -> LAPD_STATE_TIMER_RECOV
|
2657
|
DLLAPD INFO <0016> lapd_core.c:732 ((0:7-T2-S0)) transmit an RR poll command
|
2658
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:7-T2-S0)) TX: 02 05 01 03
|
2659
|
DLLAPD INFO <0016> lapd_core.c:208 ((0:7-T2-S0)) start T200 (timeout=0.300000s)
|
2660
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:7) <= len = 4, sapi(0) tei(2)
|
2661
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:7: RX: 00 05 01 09
|
2662
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:7-T2-S0)) RR received in state LAPD_STATE_TIMER_RECOV
|
2663
|
DLLAPD INFO <0016> lapd_core.c:1348 ((0:7-T2-S0)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
|
2664
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:7-T2-S0)) TX: 00 05 01 03
|
2665
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:7-T2-S0)) lapd_send_i() called from line 1373
|
2666
|
DLLAPD INFO <0016> lapd_core.c:1849 ((0:7-T2-S0)) timer recovery, not sending
|
2667
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:10) <= len = 4, sapi(0) tei(3)
|
2668
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:10: RX: 00 07 01 09
|
2669
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:10-T3-S0)) RR received in state LAPD_STATE_MF_EST
|
2670
|
DLLAPD INFO <0016> lapd_core.c:232 ((0:10-T3-S0)) stop T203
|
2671
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:10-T3-S0)) start T203
|
2672
|
DLLAPD INFO <0016> lapd_core.c:1348 ((0:10-T3-S0)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
|
2673
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:10-T3-S0)) TX: 00 07 01 03
|
2674
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:10-T3-S0)) lapd_send_i() called from line 1373
|
2675
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:4) <= len = 4, sapi(0) tei(1)
|
2676
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:4: RX: 00 03 01 09
|
2677
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:4-T1-S0)) RR received in state LAPD_STATE_MF_EST
|
2678
|
DLLAPD INFO <0016> lapd_core.c:232 ((0:4-T1-S0)) stop T203
|
2679
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:4-T1-S0)) start T203
|
2680
|
DLLAPD INFO <0016> lapd_core.c:1348 ((0:4-T1-S0)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
|
2681
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:4-T1-S0)) TX: 00 03 01 03
|
2682
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:4-T1-S0)) lapd_send_i() called from line 1373
|
2683
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:7) <= len = 4, sapi(0) tei(2)
|
2684
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:7: RX: 02 05 01 09
|
2685
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:7-T2-S0)) RR received in state LAPD_STATE_TIMER_RECOV
|
2686
|
DLLAPD INFO <0016> lapd_core.c:1364 ((0:7-T2-S0)) RR response with F==1, and we are in timer recovery state, so we leave that state
|
2687
|
DLLAPD INFO <0016> lapd_core.c:224 ((0:7-T2-S0)) stop T200
|
2688
|
DLLAPD INFO <0016> lapd_core.c:239 ((0:7-T2-S0)) new state LAPD_STATE_TIMER_RECOV -> LAPD_STATE_MF_EST
|
2689
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:7-T2-S0)) start T203
|
2690
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:7-T2-S0)) lapd_send_i() called from line 1373
|
2691
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 4, sapi(0) tei(0)
|
2692
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: 00 01 01 17
|
2693
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:1-T0-S0)) RR received in state LAPD_STATE_MF_EST
|
2694
|
DLLAPD INFO <0016> lapd_core.c:232 ((0:1-T0-S0)) stop T203
|
2695
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T0-S0)) start T203
|
2696
|
DLLAPD INFO <0016> lapd_core.c:1348 ((0:1-T0-S0)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
|
2697
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T0-S0)) TX: 00 01 01 11
|
2698
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T0-S0)) lapd_send_i() called from line 1373
|
2699
|
DLLAPD INFO <0016> lapd_core.c:719 ((0:1-T62-S62)) Timeout T203 state=LAPD_STATE_MF_EST
|
2700
|
DLLAPD INFO <0016> lapd_core.c:239 ((0:1-T62-S62)) new state LAPD_STATE_MF_EST -> LAPD_STATE_TIMER_RECOV
|
2701
|
DLLAPD INFO <0016> lapd_core.c:732 ((0:1-T62-S62)) transmit an RR poll command
|
2702
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T62-S62)) TX: fa 7d 01 1b
|
2703
|
DLLAPD INFO <0016> lapd_core.c:208 ((0:1-T62-S62)) start T200 (timeout=0.300000s)
|
2704
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 4, sapi(62) tei(62)
|
2705
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: fa 7d 01 1b
|
2706
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:1-T62-S62)) RR received in state LAPD_STATE_TIMER_RECOV
|
2707
|
DLLAPD INFO <0016> lapd_core.c:1364 ((0:1-T62-S62)) RR response with F==1, and we are in timer recovery state, so we leave that state
|
2708
|
DLLAPD INFO <0016> lapd_core.c:224 ((0:1-T62-S62)) stop T200
|
2709
|
DLLAPD INFO <0016> lapd_core.c:239 ((0:1-T62-S62)) new state LAPD_STATE_TIMER_RECOV -> LAPD_STATE_MF_EST
|
2710
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T62-S62)) start T203
|
2711
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T62-S62)) lapd_send_i() called from line 1373
|
2712
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 4, sapi(62) tei(62)
|
2713
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: f8 7d 01 1b
|
2714
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:1-T62-S62)) RR received in state LAPD_STATE_MF_EST
|
2715
|
DLLAPD INFO <0016> lapd_core.c:232 ((0:1-T62-S62)) stop T203
|
2716
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T62-S62)) start T203
|
2717
|
DLLAPD INFO <0016> lapd_core.c:1348 ((0:1-T62-S62)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
|
2718
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T62-S62)) TX: f8 7d 01 1b
|
2719
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T62-S62)) lapd_send_i() called from line 1373
|
2720
|
DHODEC DEBUG <0009> handover_decision_2.c:1853 (BTS 0) No congestion check: TRX 0 not usable
|
2721
|
DHODEC DEBUG <0009> handover_decision_2.c:163 HO algorithm 2: next periodical congestion check in 10 seconds
|
2722
|
DLLAPD INFO <0016> lapd_core.c:719 ((0:7-T2-S62)) Timeout T203 state=LAPD_STATE_MF_EST
|
2723
|
DLLAPD INFO <0016> lapd_core.c:239 ((0:7-T2-S62)) new state LAPD_STATE_MF_EST -> LAPD_STATE_TIMER_RECOV
|
2724
|
DLLAPD INFO <0016> lapd_core.c:732 ((0:7-T2-S62)) transmit an RR poll command
|
2725
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:7-T2-S62)) TX: fa 05 01 01
|
2726
|
DLLAPD INFO <0016> lapd_core.c:208 ((0:7-T2-S62)) start T200 (timeout=0.300000s)
|
2727
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:7) <= len = 4, sapi(62) tei(2)
|
2728
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:7: RX: f8 05 01 01
|
2729
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:7-T2-S62)) RR received in state LAPD_STATE_TIMER_RECOV
|
2730
|
DLLAPD INFO <0016> lapd_core.c:1348 ((0:7-T2-S62)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
|
2731
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:7-T2-S62)) TX: f8 05 01 01
|
2732
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:7-T2-S62)) lapd_send_i() called from line 1373
|
2733
|
DLLAPD INFO <0016> lapd_core.c:1849 ((0:7-T2-S62)) timer recovery, not sending
|
2734
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 4, sapi(62) tei(0)
|
2735
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: f8 01 01 01
|
2736
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:1-T0-S62)) RR received in state LAPD_STATE_MF_EST
|
2737
|
DLLAPD INFO <0016> lapd_core.c:232 ((0:1-T0-S62)) stop T203
|
2738
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T0-S62)) start T203
|
2739
|
DLLAPD INFO <0016> lapd_core.c:1348 ((0:1-T0-S62)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
|
2740
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T0-S62)) TX: f8 01 01 01
|
2741
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T0-S62)) lapd_send_i() called from line 1373
|
2742
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:10) <= len = 4, sapi(62) tei(3)
|
2743
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:10: RX: f8 07 01 01
|
2744
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:10-T3-S62)) RR received in state LAPD_STATE_MF_EST
|
2745
|
DLLAPD INFO <0016> lapd_core.c:232 ((0:10-T3-S62)) stop T203
|
2746
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:10-T3-S62)) start T203
|
2747
|
DLLAPD INFO <0016> lapd_core.c:1348 ((0:10-T3-S62)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
|
2748
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:10-T3-S62)) TX: f8 07 01 01
|
2749
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:10-T3-S62)) lapd_send_i() called from line 1373
|
2750
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:4) <= len = 4, sapi(62) tei(1)
|
2751
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:4: RX: f8 03 01 01
|
2752
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:4-T1-S62)) RR received in state LAPD_STATE_MF_EST
|
2753
|
DLLAPD INFO <0016> lapd_core.c:232 ((0:4-T1-S62)) stop T203
|
2754
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:4-T1-S62)) start T203
|
2755
|
DLLAPD INFO <0016> lapd_core.c:1348 ((0:4-T1-S62)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
|
2756
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:4-T1-S62)) TX: f8 03 01 01
|
2757
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:4-T1-S62)) lapd_send_i() called from line 1373
|
2758
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:7) <= len = 4, sapi(62) tei(2)
|
2759
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:7: RX: fa 05 01 01
|
2760
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:7-T2-S62)) RR received in state LAPD_STATE_TIMER_RECOV
|
2761
|
DLLAPD INFO <0016> lapd_core.c:1364 ((0:7-T2-S62)) RR response with F==1, and we are in timer recovery state, so we leave that state
|
2762
|
DLLAPD INFO <0016> lapd_core.c:224 ((0:7-T2-S62)) stop T200
|
2763
|
DLLAPD INFO <0016> lapd_core.c:239 ((0:7-T2-S62)) new state LAPD_STATE_TIMER_RECOV -> LAPD_STATE_MF_EST
|
2764
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:7-T2-S62)) start T203
|
2765
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:7-T2-S62)) lapd_send_i() called from line 1373
|
2766
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:7) <= len = 4, sapi(0) tei(2)
|
2767
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:7: RX: 00 05 01 09
|
2768
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:7-T2-S0)) RR received in state LAPD_STATE_MF_EST
|
2769
|
DLLAPD INFO <0016> lapd_core.c:232 ((0:7-T2-S0)) stop T203
|
2770
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:7-T2-S0)) start T203
|
2771
|
DLLAPD INFO <0016> lapd_core.c:1348 ((0:7-T2-S0)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
|
2772
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:7-T2-S0)) TX: 00 05 01 03
|
2773
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:7-T2-S0)) lapd_send_i() called from line 1373
|
2774
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:10) <= len = 4, sapi(0) tei(3)
|
2775
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:10: RX: 00 07 01 09
|
2776
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:10-T3-S0)) RR received in state LAPD_STATE_MF_EST
|
2777
|
DLLAPD INFO <0016> lapd_core.c:232 ((0:10-T3-S0)) stop T203
|
2778
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:10-T3-S0)) start T203
|
2779
|
DLLAPD INFO <0016> lapd_core.c:1348 ((0:10-T3-S0)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
|
2780
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:10-T3-S0)) TX: 00 07 01 03
|
2781
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:10-T3-S0)) lapd_send_i() called from line 1373
|
2782
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:4) <= len = 4, sapi(0) tei(1)
|
2783
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:4: RX: 00 03 01 09
|
2784
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:4-T1-S0)) RR received in state LAPD_STATE_MF_EST
|
2785
|
DLLAPD INFO <0016> lapd_core.c:232 ((0:4-T1-S0)) stop T203
|
2786
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:4-T1-S0)) start T203
|
2787
|
DLLAPD INFO <0016> lapd_core.c:1348 ((0:4-T1-S0)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
|
2788
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:4-T1-S0)) TX: 00 03 01 03
|
2789
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:4-T1-S0)) lapd_send_i() called from line 1373
|
2790
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 4, sapi(0) tei(0)
|
2791
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: 00 01 01 17
|
2792
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:1-T0-S0)) RR received in state LAPD_STATE_MF_EST
|
2793
|
DLLAPD INFO <0016> lapd_core.c:232 ((0:1-T0-S0)) stop T203
|
2794
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T0-S0)) start T203
|
2795
|
DLLAPD INFO <0016> lapd_core.c:1348 ((0:1-T0-S0)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
|
2796
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T0-S0)) TX: 00 01 01 11
|
2797
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T0-S0)) lapd_send_i() called from line 1373
|
2798
|
DLLAPD INFO <0016> lapd_core.c:719 ((0:1-T62-S62)) Timeout T203 state=LAPD_STATE_MF_EST
|
2799
|
DLLAPD INFO <0016> lapd_core.c:239 ((0:1-T62-S62)) new state LAPD_STATE_MF_EST -> LAPD_STATE_TIMER_RECOV
|
2800
|
DLLAPD INFO <0016> lapd_core.c:732 ((0:1-T62-S62)) transmit an RR poll command
|
2801
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T62-S62)) TX: fa 7d 01 1b
|
2802
|
DLLAPD INFO <0016> lapd_core.c:208 ((0:1-T62-S62)) start T200 (timeout=0.300000s)
|
2803
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 4, sapi(62) tei(62)
|
2804
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: fa 7d 01 1b
|
2805
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:1-T62-S62)) RR received in state LAPD_STATE_TIMER_RECOV
|
2806
|
DLLAPD INFO <0016> lapd_core.c:1364 ((0:1-T62-S62)) RR response with F==1, and we are in timer recovery state, so we leave that state
|
2807
|
DLLAPD INFO <0016> lapd_core.c:224 ((0:1-T62-S62)) stop T200
|
2808
|
DLLAPD INFO <0016> lapd_core.c:239 ((0:1-T62-S62)) new state LAPD_STATE_TIMER_RECOV -> LAPD_STATE_MF_EST
|
2809
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T62-S62)) start T203
|
2810
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T62-S62)) lapd_send_i() called from line 1373
|
2811
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 4, sapi(62) tei(62)
|
2812
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: f8 7d 01 1b
|
2813
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:1-T62-S62)) RR received in state LAPD_STATE_MF_EST
|
2814
|
DLLAPD INFO <0016> lapd_core.c:232 ((0:1-T62-S62)) stop T203
|
2815
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T62-S62)) start T203
|
2816
|
DLLAPD INFO <0016> lapd_core.c:1348 ((0:1-T62-S62)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
|
2817
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T62-S62)) TX: f8 7d 01 1b
|
2818
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T62-S62)) lapd_send_i() called from line 1373
|
2819
|
DHODEC DEBUG <0009> handover_decision_2.c:1853 (BTS 0) No congestion check: TRX 0 not usable
|
2820
|
DHODEC DEBUG <0009> handover_decision_2.c:163 HO algorithm 2: next periodical congestion check in 10 seconds
|
2821
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:7) <= len = 4, sapi(62) tei(2)
|
2822
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:7: RX: f8 05 01 01
|
2823
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:7-T2-S62)) RR received in state LAPD_STATE_MF_EST
|
2824
|
DLLAPD INFO <0016> lapd_core.c:232 ((0:7-T2-S62)) stop T203
|
2825
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:7-T2-S62)) start T203
|
2826
|
DLLAPD INFO <0016> lapd_core.c:1348 ((0:7-T2-S62)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
|
2827
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:7-T2-S62)) TX: f8 05 01 01
|
2828
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:7-T2-S62)) lapd_send_i() called from line 1373
|
2829
|
DLLAPD INFO <0016> lapd_core.c:719 ((0:1-T0-S62)) Timeout T203 state=LAPD_STATE_MF_EST
|
2830
|
DLLAPD INFO <0016> lapd_core.c:239 ((0:1-T0-S62)) new state LAPD_STATE_MF_EST -> LAPD_STATE_TIMER_RECOV
|
2831
|
DLLAPD INFO <0016> lapd_core.c:732 ((0:1-T0-S62)) transmit an RR poll command
|
2832
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T0-S62)) TX: fa 01 01 01
|
2833
|
DLLAPD INFO <0016> lapd_core.c:208 ((0:1-T0-S62)) start T200 (timeout=0.300000s)
|
2834
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 4, sapi(62) tei(0)
|
2835
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: f8 01 01 01
|
2836
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:1-T0-S62)) RR received in state LAPD_STATE_TIMER_RECOV
|
2837
|
DLLAPD INFO <0016> lapd_core.c:1348 ((0:1-T0-S62)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
|
2838
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T0-S62)) TX: f8 01 01 01
|
2839
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T0-S62)) lapd_send_i() called from line 1373
|
2840
|
DLLAPD INFO <0016> lapd_core.c:1849 ((0:1-T0-S62)) timer recovery, not sending
|
2841
|
DLLAPD INFO <0016> lapd_core.c:719 ((0:10-T3-S62)) Timeout T203 state=LAPD_STATE_MF_EST
|
2842
|
DLLAPD INFO <0016> lapd_core.c:239 ((0:10-T3-S62)) new state LAPD_STATE_MF_EST -> LAPD_STATE_TIMER_RECOV
|
2843
|
DLLAPD INFO <0016> lapd_core.c:732 ((0:10-T3-S62)) transmit an RR poll command
|
2844
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:10-T3-S62)) TX: fa 07 01 01
|
2845
|
DLLAPD INFO <0016> lapd_core.c:208 ((0:10-T3-S62)) start T200 (timeout=0.300000s)
|
2846
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:10) <= len = 4, sapi(62) tei(3)
|
2847
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:10: RX: f8 07 01 01
|
2848
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:10-T3-S62)) RR received in state LAPD_STATE_TIMER_RECOV
|
2849
|
DLLAPD INFO <0016> lapd_core.c:1348 ((0:10-T3-S62)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
|
2850
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:10-T3-S62)) TX: f8 07 01 01
|
2851
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:10-T3-S62)) lapd_send_i() called from line 1373
|
2852
|
DLLAPD INFO <0016> lapd_core.c:1849 ((0:10-T3-S62)) timer recovery, not sending
|
2853
|
DLLAPD INFO <0016> lapd_core.c:719 ((0:4-T1-S62)) Timeout T203 state=LAPD_STATE_MF_EST
|
2854
|
DLLAPD INFO <0016> lapd_core.c:239 ((0:4-T1-S62)) new state LAPD_STATE_MF_EST -> LAPD_STATE_TIMER_RECOV
|
2855
|
DLLAPD INFO <0016> lapd_core.c:732 ((0:4-T1-S62)) transmit an RR poll command
|
2856
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:4-T1-S62)) TX: fa 03 01 01
|
2857
|
DLLAPD INFO <0016> lapd_core.c:208 ((0:4-T1-S62)) start T200 (timeout=0.300000s)
|
2858
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:4) <= len = 4, sapi(62) tei(1)
|
2859
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:4: RX: f8 03 01 01
|
2860
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:4-T1-S62)) RR received in state LAPD_STATE_TIMER_RECOV
|
2861
|
DLLAPD INFO <0016> lapd_core.c:1348 ((0:4-T1-S62)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
|
2862
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:4-T1-S62)) TX: f8 03 01 01
|
2863
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:4-T1-S62)) lapd_send_i() called from line 1373
|
2864
|
DLLAPD INFO <0016> lapd_core.c:1849 ((0:4-T1-S62)) timer recovery, not sending
|
2865
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 4, sapi(62) tei(0)
|
2866
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: fa 01 01 01
|
2867
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:1-T0-S62)) RR received in state LAPD_STATE_TIMER_RECOV
|
2868
|
DLLAPD INFO <0016> lapd_core.c:1364 ((0:1-T0-S62)) RR response with F==1, and we are in timer recovery state, so we leave that state
|
2869
|
DLLAPD INFO <0016> lapd_core.c:224 ((0:1-T0-S62)) stop T200
|
2870
|
DLLAPD INFO <0016> lapd_core.c:239 ((0:1-T0-S62)) new state LAPD_STATE_TIMER_RECOV -> LAPD_STATE_MF_EST
|
2871
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T0-S62)) start T203
|
2872
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T0-S62)) lapd_send_i() called from line 1373
|
2873
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:10) <= len = 4, sapi(62) tei(3)
|
2874
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:10: RX: fa 07 01 01
|
2875
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:10-T3-S62)) RR received in state LAPD_STATE_TIMER_RECOV
|
2876
|
DLLAPD INFO <0016> lapd_core.c:1364 ((0:10-T3-S62)) RR response with F==1, and we are in timer recovery state, so we leave that state
|
2877
|
DLLAPD INFO <0016> lapd_core.c:224 ((0:10-T3-S62)) stop T200
|
2878
|
DLLAPD INFO <0016> lapd_core.c:239 ((0:10-T3-S62)) new state LAPD_STATE_TIMER_RECOV -> LAPD_STATE_MF_EST
|
2879
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:10-T3-S62)) start T203
|
2880
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:10-T3-S62)) lapd_send_i() called from line 1373
|
2881
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:4) <= len = 4, sapi(62) tei(1)
|
2882
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:4: RX: fa 03 01 01
|
2883
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:4-T1-S62)) RR received in state LAPD_STATE_TIMER_RECOV
|
2884
|
DLLAPD INFO <0016> lapd_core.c:1364 ((0:4-T1-S62)) RR response with F==1, and we are in timer recovery state, so we leave that state
|
2885
|
DLLAPD INFO <0016> lapd_core.c:224 ((0:4-T1-S62)) stop T200
|
2886
|
DLLAPD INFO <0016> lapd_core.c:239 ((0:4-T1-S62)) new state LAPD_STATE_TIMER_RECOV -> LAPD_STATE_MF_EST
|
2887
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:4-T1-S62)) start T203
|
2888
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:4-T1-S62)) lapd_send_i() called from line 1373
|
2889
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:7) <= len = 4, sapi(0) tei(2)
|
2890
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:7: RX: 00 05 01 09
|
2891
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:7-T2-S0)) RR received in state LAPD_STATE_MF_EST
|
2892
|
DLLAPD INFO <0016> lapd_core.c:232 ((0:7-T2-S0)) stop T203
|
2893
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:7-T2-S0)) start T203
|
2894
|
DLLAPD INFO <0016> lapd_core.c:1348 ((0:7-T2-S0)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
|
2895
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:7-T2-S0)) TX: 00 05 01 03
|
2896
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:7-T2-S0)) lapd_send_i() called from line 1373
|
2897
|
DLLAPD INFO <0016> lapd_core.c:719 ((0:10-T3-S0)) Timeout T203 state=LAPD_STATE_MF_EST
|
2898
|
DLLAPD INFO <0016> lapd_core.c:239 ((0:10-T3-S0)) new state LAPD_STATE_MF_EST -> LAPD_STATE_TIMER_RECOV
|
2899
|
DLLAPD INFO <0016> lapd_core.c:732 ((0:10-T3-S0)) transmit an RR poll command
|
2900
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:10-T3-S0)) TX: 02 07 01 03
|
2901
|
DLLAPD INFO <0016> lapd_core.c:208 ((0:10-T3-S0)) start T200 (timeout=0.300000s)
|
2902
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:10) <= len = 4, sapi(0) tei(3)
|
2903
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:10: RX: 00 07 01 09
|
2904
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:10-T3-S0)) RR received in state LAPD_STATE_TIMER_RECOV
|
2905
|
DLLAPD INFO <0016> lapd_core.c:1348 ((0:10-T3-S0)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
|
2906
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:10-T3-S0)) TX: 00 07 01 03
|
2907
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:10-T3-S0)) lapd_send_i() called from line 1373
|
2908
|
DLLAPD INFO <0016> lapd_core.c:1849 ((0:10-T3-S0)) timer recovery, not sending
|
2909
|
DLLAPD INFO <0016> lapd_core.c:719 ((0:4-T1-S0)) Timeout T203 state=LAPD_STATE_MF_EST
|
2910
|
DLLAPD INFO <0016> lapd_core.c:239 ((0:4-T1-S0)) new state LAPD_STATE_MF_EST -> LAPD_STATE_TIMER_RECOV
|
2911
|
DLLAPD INFO <0016> lapd_core.c:732 ((0:4-T1-S0)) transmit an RR poll command
|
2912
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:4-T1-S0)) TX: 02 03 01 03
|
2913
|
DLLAPD INFO <0016> lapd_core.c:208 ((0:4-T1-S0)) start T200 (timeout=0.300000s)
|
2914
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:4) <= len = 4, sapi(0) tei(1)
|
2915
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:4: RX: 00 03 01 09
|
2916
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:4-T1-S0)) RR received in state LAPD_STATE_TIMER_RECOV
|
2917
|
DLLAPD INFO <0016> lapd_core.c:1348 ((0:4-T1-S0)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
|
2918
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:4-T1-S0)) TX: 00 03 01 03
|
2919
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:4-T1-S0)) lapd_send_i() called from line 1373
|
2920
|
DLLAPD INFO <0016> lapd_core.c:1849 ((0:4-T1-S0)) timer recovery, not sending
|
2921
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:10) <= len = 4, sapi(0) tei(3)
|
2922
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:10: RX: 02 07 01 09
|
2923
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:10-T3-S0)) RR received in state LAPD_STATE_TIMER_RECOV
|
2924
|
DLLAPD INFO <0016> lapd_core.c:1364 ((0:10-T3-S0)) RR response with F==1, and we are in timer recovery state, so we leave that state
|
2925
|
DLLAPD INFO <0016> lapd_core.c:224 ((0:10-T3-S0)) stop T200
|
2926
|
DLLAPD INFO <0016> lapd_core.c:239 ((0:10-T3-S0)) new state LAPD_STATE_TIMER_RECOV -> LAPD_STATE_MF_EST
|
2927
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:10-T3-S0)) start T203
|
2928
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:10-T3-S0)) lapd_send_i() called from line 1373
|
2929
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:4) <= len = 4, sapi(0) tei(1)
|
2930
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:4: RX: 02 03 01 09
|
2931
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:4-T1-S0)) RR received in state LAPD_STATE_TIMER_RECOV
|
2932
|
DLLAPD INFO <0016> lapd_core.c:1364 ((0:4-T1-S0)) RR response with F==1, and we are in timer recovery state, so we leave that state
|
2933
|
DLLAPD INFO <0016> lapd_core.c:224 ((0:4-T1-S0)) stop T200
|
2934
|
DLLAPD INFO <0016> lapd_core.c:239 ((0:4-T1-S0)) new state LAPD_STATE_TIMER_RECOV -> LAPD_STATE_MF_EST
|
2935
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:4-T1-S0)) start T203
|
2936
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:4-T1-S0)) lapd_send_i() called from line 1373
|
2937
|
DLLAPD INFO <0016> lapd_core.c:719 ((0:1-T0-S0)) Timeout T203 state=LAPD_STATE_MF_EST
|
2938
|
DLLAPD INFO <0016> lapd_core.c:239 ((0:1-T0-S0)) new state LAPD_STATE_MF_EST -> LAPD_STATE_TIMER_RECOV
|
2939
|
DLLAPD INFO <0016> lapd_core.c:732 ((0:1-T0-S0)) transmit an RR poll command
|
2940
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T0-S0)) TX: 02 01 01 11
|
2941
|
DLLAPD INFO <0016> lapd_core.c:208 ((0:1-T0-S0)) start T200 (timeout=0.300000s)
|
2942
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 4, sapi(0) tei(0)
|
2943
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: 00 01 01 17
|
2944
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:1-T0-S0)) RR received in state LAPD_STATE_TIMER_RECOV
|
2945
|
DLLAPD INFO <0016> lapd_core.c:1348 ((0:1-T0-S0)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
|
2946
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T0-S0)) TX: 00 01 01 11
|
2947
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T0-S0)) lapd_send_i() called from line 1373
|
2948
|
DLLAPD INFO <0016> lapd_core.c:1849 ((0:1-T0-S0)) timer recovery, not sending
|
2949
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 4, sapi(0) tei(0)
|
2950
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: 02 01 01 17
|
2951
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:1-T0-S0)) RR received in state LAPD_STATE_TIMER_RECOV
|
2952
|
DLLAPD INFO <0016> lapd_core.c:1364 ((0:1-T0-S0)) RR response with F==1, and we are in timer recovery state, so we leave that state
|
2953
|
DLLAPD INFO <0016> lapd_core.c:224 ((0:1-T0-S0)) stop T200
|
2954
|
DLLAPD INFO <0016> lapd_core.c:239 ((0:1-T0-S0)) new state LAPD_STATE_TIMER_RECOV -> LAPD_STATE_MF_EST
|
2955
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T0-S0)) start T203
|
2956
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T0-S0)) lapd_send_i() called from line 1373
|
2957
|
DLLAPD INFO <0016> lapd_core.c:719 ((0:1-T62-S62)) Timeout T203 state=LAPD_STATE_MF_EST
|
2958
|
DLLAPD INFO <0016> lapd_core.c:239 ((0:1-T62-S62)) new state LAPD_STATE_MF_EST -> LAPD_STATE_TIMER_RECOV
|
2959
|
DLLAPD INFO <0016> lapd_core.c:732 ((0:1-T62-S62)) transmit an RR poll command
|
2960
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T62-S62)) TX: fa 7d 01 1b
|
2961
|
DLLAPD INFO <0016> lapd_core.c:208 ((0:1-T62-S62)) start T200 (timeout=0.300000s)
|
2962
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 4, sapi(62) tei(62)
|
2963
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: fa 7d 01 1b
|
2964
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:1-T62-S62)) RR received in state LAPD_STATE_TIMER_RECOV
|
2965
|
DLLAPD INFO <0016> lapd_core.c:1364 ((0:1-T62-S62)) RR response with F==1, and we are in timer recovery state, so we leave that state
|
2966
|
DLLAPD INFO <0016> lapd_core.c:224 ((0:1-T62-S62)) stop T200
|
2967
|
DLLAPD INFO <0016> lapd_core.c:239 ((0:1-T62-S62)) new state LAPD_STATE_TIMER_RECOV -> LAPD_STATE_MF_EST
|
2968
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T62-S62)) start T203
|
2969
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T62-S62)) lapd_send_i() called from line 1373
|
2970
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 4, sapi(62) tei(62)
|
2971
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: f8 7d 01 1b
|
2972
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:1-T62-S62)) RR received in state LAPD_STATE_MF_EST
|
2973
|
DLLAPD INFO <0016> lapd_core.c:232 ((0:1-T62-S62)) stop T203
|
2974
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T62-S62)) start T203
|
2975
|
DLLAPD INFO <0016> lapd_core.c:1348 ((0:1-T62-S62)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
|
2976
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T62-S62)) TX: f8 7d 01 1b
|
2977
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T62-S62)) lapd_send_i() called from line 1373
|
2978
|
DHODEC DEBUG <0009> handover_decision_2.c:1853 (BTS 0) No congestion check: TRX 0 not usable
|
2979
|
DHODEC DEBUG <0009> handover_decision_2.c:163 HO algorithm 2: next periodical congestion check in 10 seconds
|
2980
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:7) <= len = 4, sapi(62) tei(2)
|
2981
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:7: RX: f8 05 01 01
|
2982
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:7-T2-S62)) RR received in state LAPD_STATE_MF_EST
|
2983
|
DLLAPD INFO <0016> lapd_core.c:232 ((0:7-T2-S62)) stop T203
|
2984
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:7-T2-S62)) start T203
|
2985
|
DLLAPD INFO <0016> lapd_core.c:1348 ((0:7-T2-S62)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
|
2986
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:7-T2-S62)) TX: f8 05 01 01
|
2987
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:7-T2-S62)) lapd_send_i() called from line 1373
|
2988
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 4, sapi(62) tei(0)
|
2989
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: f8 01 01 01
|
2990
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:1-T0-S62)) RR received in state LAPD_STATE_MF_EST
|
2991
|
DLLAPD INFO <0016> lapd_core.c:232 ((0:1-T0-S62)) stop T203
|
2992
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T0-S62)) start T203
|
2993
|
DLLAPD INFO <0016> lapd_core.c:1348 ((0:1-T0-S62)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
|
2994
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T0-S62)) TX: f8 01 01 01
|
2995
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T0-S62)) lapd_send_i() called from line 1373
|
2996
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:10) <= len = 4, sapi(62) tei(3)
|
2997
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:10: RX: f8 07 01 01
|
2998
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:10-T3-S62)) RR received in state LAPD_STATE_MF_EST
|
2999
|
DLLAPD INFO <0016> lapd_core.c:232 ((0:10-T3-S62)) stop T203
|
3000
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:10-T3-S62)) start T203
|
3001
|
DLLAPD INFO <0016> lapd_core.c:1348 ((0:10-T3-S62)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
|
3002
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:10-T3-S62)) TX: f8 07 01 01
|
3003
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:10-T3-S62)) lapd_send_i() called from line 1373
|
3004
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:4) <= len = 4, sapi(62) tei(1)
|
3005
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:4: RX: f8 03 01 01
|
3006
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:4-T1-S62)) RR received in state LAPD_STATE_MF_EST
|
3007
|
DLLAPD INFO <0016> lapd_core.c:232 ((0:4-T1-S62)) stop T203
|
3008
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:4-T1-S62)) start T203
|
3009
|
DLLAPD INFO <0016> lapd_core.c:1348 ((0:4-T1-S62)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
|
3010
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:4-T1-S62)) TX: f8 03 01 01
|
3011
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:4-T1-S62)) lapd_send_i() called from line 1373
|
3012
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:7) <= len = 4, sapi(0) tei(2)
|
3013
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:7: RX: 00 05 01 09
|
3014
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:7-T2-S0)) RR received in state LAPD_STATE_MF_EST
|
3015
|
DLLAPD INFO <0016> lapd_core.c:232 ((0:7-T2-S0)) stop T203
|
3016
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:7-T2-S0)) start T203
|
3017
|
DLLAPD INFO <0016> lapd_core.c:1348 ((0:7-T2-S0)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
|
3018
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:7-T2-S0)) TX: 00 05 01 03
|
3019
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:7-T2-S0)) lapd_send_i() called from line 1373
|
3020
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:10) <= len = 4, sapi(0) tei(3)
|
3021
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:10: RX: 00 07 01 09
|
3022
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:10-T3-S0)) RR received in state LAPD_STATE_MF_EST
|
3023
|
DLLAPD INFO <0016> lapd_core.c:232 ((0:10-T3-S0)) stop T203
|
3024
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:10-T3-S0)) start T203
|
3025
|
DLLAPD INFO <0016> lapd_core.c:1348 ((0:10-T3-S0)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
|
3026
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:10-T3-S0)) TX: 00 07 01 03
|
3027
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:10-T3-S0)) lapd_send_i() called from line 1373
|
3028
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:4) <= len = 4, sapi(0) tei(1)
|
3029
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:4: RX: 00 03 01 09
|
3030
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:4-T1-S0)) RR received in state LAPD_STATE_MF_EST
|
3031
|
DLLAPD INFO <0016> lapd_core.c:232 ((0:4-T1-S0)) stop T203
|
3032
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:4-T1-S0)) start T203
|
3033
|
DLLAPD INFO <0016> lapd_core.c:1348 ((0:4-T1-S0)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
|
3034
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:4-T1-S0)) TX: 00 03 01 03
|
3035
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:4-T1-S0)) lapd_send_i() called from line 1373
|
3036
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 4, sapi(0) tei(0)
|
3037
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: 00 01 01 17
|
3038
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:1-T0-S0)) RR received in state LAPD_STATE_MF_EST
|
3039
|
DLLAPD INFO <0016> lapd_core.c:232 ((0:1-T0-S0)) stop T203
|
3040
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T0-S0)) start T203
|
3041
|
DLLAPD INFO <0016> lapd_core.c:1348 ((0:1-T0-S0)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
|
3042
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T0-S0)) TX: 00 01 01 11
|
3043
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T0-S0)) lapd_send_i() called from line 1373
|
3044
|
DLLAPD INFO <0016> lapd_core.c:719 ((0:1-T62-S62)) Timeout T203 state=LAPD_STATE_MF_EST
|
3045
|
DLLAPD INFO <0016> lapd_core.c:239 ((0:1-T62-S62)) new state LAPD_STATE_MF_EST -> LAPD_STATE_TIMER_RECOV
|
3046
|
DLLAPD INFO <0016> lapd_core.c:732 ((0:1-T62-S62)) transmit an RR poll command
|
3047
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T62-S62)) TX: fa 7d 01 1b
|
3048
|
DLLAPD INFO <0016> lapd_core.c:208 ((0:1-T62-S62)) start T200 (timeout=0.300000s)
|
3049
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 4, sapi(62) tei(62)
|
3050
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: fa 7d 01 1b
|
3051
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:1-T62-S62)) RR received in state LAPD_STATE_TIMER_RECOV
|
3052
|
DLLAPD INFO <0016> lapd_core.c:1364 ((0:1-T62-S62)) RR response with F==1, and we are in timer recovery state, so we leave that state
|
3053
|
DLLAPD INFO <0016> lapd_core.c:224 ((0:1-T62-S62)) stop T200
|
3054
|
DLLAPD INFO <0016> lapd_core.c:239 ((0:1-T62-S62)) new state LAPD_STATE_TIMER_RECOV -> LAPD_STATE_MF_EST
|
3055
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T62-S62)) start T203
|
3056
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T62-S62)) lapd_send_i() called from line 1373
|
3057
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 4, sapi(62) tei(62)
|
3058
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: f8 7d 01 1b
|
3059
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:1-T62-S62)) RR received in state LAPD_STATE_MF_EST
|
3060
|
DLLAPD INFO <0016> lapd_core.c:232 ((0:1-T62-S62)) stop T203
|
3061
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T62-S62)) start T203
|
3062
|
DLLAPD INFO <0016> lapd_core.c:1348 ((0:1-T62-S62)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
|
3063
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T62-S62)) TX: f8 7d 01 1b
|
3064
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T62-S62)) lapd_send_i() called from line 1373
|
3065
|
DHODEC DEBUG <0009> handover_decision_2.c:1853 (BTS 0) No congestion check: TRX 0 not usable
|
3066
|
DHODEC DEBUG <0009> handover_decision_2.c:163 HO algorithm 2: next periodical congestion check in 10 seconds
|
3067
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:7) <= len = 4, sapi(62) tei(2)
|
3068
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:7: RX: f8 05 01 01
|
3069
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:7-T2-S62)) RR received in state LAPD_STATE_MF_EST
|
3070
|
DLLAPD INFO <0016> lapd_core.c:232 ((0:7-T2-S62)) stop T203
|
3071
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:7-T2-S62)) start T203
|
3072
|
DLLAPD INFO <0016> lapd_core.c:1348 ((0:7-T2-S62)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
|
3073
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:7-T2-S62)) TX: f8 05 01 01
|
3074
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:7-T2-S62)) lapd_send_i() called from line 1373
|
3075
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 4, sapi(62) tei(0)
|
3076
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: f8 01 01 01
|
3077
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:1-T0-S62)) RR received in state LAPD_STATE_MF_EST
|
3078
|
DLLAPD INFO <0016> lapd_core.c:232 ((0:1-T0-S62)) stop T203
|
3079
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T0-S62)) start T203
|
3080
|
DLLAPD INFO <0016> lapd_core.c:1348 ((0:1-T0-S62)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
|
3081
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T0-S62)) TX: f8 01 01 01
|
3082
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T0-S62)) lapd_send_i() called from line 1373
|
3083
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:10) <= len = 4, sapi(62) tei(3)
|
3084
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:10: RX: f8 07 01 01
|
3085
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:10-T3-S62)) RR received in state LAPD_STATE_MF_EST
|
3086
|
DLLAPD INFO <0016> lapd_core.c:232 ((0:10-T3-S62)) stop T203
|
3087
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:10-T3-S62)) start T203
|
3088
|
DLLAPD INFO <0016> lapd_core.c:1348 ((0:10-T3-S62)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
|
3089
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:10-T3-S62)) TX: f8 07 01 01
|
3090
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:10-T3-S62)) lapd_send_i() called from line 1373
|
3091
|
DLLAPD INFO <0016> lapd_core.c:719 ((0:4-T1-S62)) Timeout T203 state=LAPD_STATE_MF_EST
|
3092
|
DLLAPD INFO <0016> lapd_core.c:239 ((0:4-T1-S62)) new state LAPD_STATE_MF_EST -> LAPD_STATE_TIMER_RECOV
|
3093
|
DLLAPD INFO <0016> lapd_core.c:732 ((0:4-T1-S62)) transmit an RR poll command
|
3094
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:4-T1-S62)) TX: fa 03 01 01
|
3095
|
DLLAPD INFO <0016> lapd_core.c:208 ((0:4-T1-S62)) start T200 (timeout=0.300000s)
|
3096
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:4) <= len = 4, sapi(62) tei(1)
|
3097
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:4: RX: f8 03 01 01
|
3098
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:4-T1-S62)) RR received in state LAPD_STATE_TIMER_RECOV
|
3099
|
DLLAPD INFO <0016> lapd_core.c:1348 ((0:4-T1-S62)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
|
3100
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:4-T1-S62)) TX: f8 03 01 01
|
3101
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:4-T1-S62)) lapd_send_i() called from line 1373
|
3102
|
DLLAPD INFO <0016> lapd_core.c:1849 ((0:4-T1-S62)) timer recovery, not sending
|
3103
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:4) <= len = 4, sapi(62) tei(1)
|
3104
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:4: RX: fa 03 01 01
|
3105
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:4-T1-S62)) RR received in state LAPD_STATE_TIMER_RECOV
|
3106
|
DLLAPD INFO <0016> lapd_core.c:1364 ((0:4-T1-S62)) RR response with F==1, and we are in timer recovery state, so we leave that state
|
3107
|
DLLAPD INFO <0016> lapd_core.c:224 ((0:4-T1-S62)) stop T200
|
3108
|
DLLAPD INFO <0016> lapd_core.c:239 ((0:4-T1-S62)) new state LAPD_STATE_TIMER_RECOV -> LAPD_STATE_MF_EST
|
3109
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:4-T1-S62)) start T203
|
3110
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:4-T1-S62)) lapd_send_i() called from line 1373
|
3111
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:7) <= len = 4, sapi(0) tei(2)
|
3112
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:7: RX: 00 05 01 09
|
3113
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:7-T2-S0)) RR received in state LAPD_STATE_MF_EST
|
3114
|
DLLAPD INFO <0016> lapd_core.c:232 ((0:7-T2-S0)) stop T203
|
3115
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:7-T2-S0)) start T203
|
3116
|
DLLAPD INFO <0016> lapd_core.c:1348 ((0:7-T2-S0)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
|
3117
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:7-T2-S0)) TX: 00 05 01 03
|
3118
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:7-T2-S0)) lapd_send_i() called from line 1373
|
3119
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:10) <= len = 4, sapi(0) tei(3)
|
3120
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:10: RX: 00 07 01 09
|
3121
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:10-T3-S0)) RR received in state LAPD_STATE_MF_EST
|
3122
|
DLLAPD INFO <0016> lapd_core.c:232 ((0:10-T3-S0)) stop T203
|
3123
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:10-T3-S0)) start T203
|
3124
|
DLLAPD INFO <0016> lapd_core.c:1348 ((0:10-T3-S0)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
|
3125
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:10-T3-S0)) TX: 00 07 01 03
|
3126
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:10-T3-S0)) lapd_send_i() called from line 1373
|
3127
|
DLLAPD INFO <0016> lapd_core.c:719 ((0:4-T1-S0)) Timeout T203 state=LAPD_STATE_MF_EST
|
3128
|
DLLAPD INFO <0016> lapd_core.c:239 ((0:4-T1-S0)) new state LAPD_STATE_MF_EST -> LAPD_STATE_TIMER_RECOV
|
3129
|
DLLAPD INFO <0016> lapd_core.c:732 ((0:4-T1-S0)) transmit an RR poll command
|
3130
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:4-T1-S0)) TX: 02 03 01 03
|
3131
|
DLLAPD INFO <0016> lapd_core.c:208 ((0:4-T1-S0)) start T200 (timeout=0.300000s)
|
3132
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:4) <= len = 4, sapi(0) tei(1)
|
3133
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:4: RX: 00 03 01 09
|
3134
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:4-T1-S0)) RR received in state LAPD_STATE_TIMER_RECOV
|
3135
|
DLLAPD INFO <0016> lapd_core.c:1348 ((0:4-T1-S0)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
|
3136
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:4-T1-S0)) TX: 00 03 01 03
|
3137
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:4-T1-S0)) lapd_send_i() called from line 1373
|
3138
|
DLLAPD INFO <0016> lapd_core.c:1849 ((0:4-T1-S0)) timer recovery, not sending
|
3139
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:4) <= len = 4, sapi(0) tei(1)
|
3140
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:4: RX: 02 03 01 09
|
3141
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:4-T1-S0)) RR received in state LAPD_STATE_TIMER_RECOV
|
3142
|
DLLAPD INFO <0016> lapd_core.c:1364 ((0:4-T1-S0)) RR response with F==1, and we are in timer recovery state, so we leave that state
|
3143
|
DLLAPD INFO <0016> lapd_core.c:224 ((0:4-T1-S0)) stop T200
|
3144
|
DLLAPD INFO <0016> lapd_core.c:239 ((0:4-T1-S0)) new state LAPD_STATE_TIMER_RECOV -> LAPD_STATE_MF_EST
|
3145
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:4-T1-S0)) start T203
|
3146
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:4-T1-S0)) lapd_send_i() called from line 1373
|
3147
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 4, sapi(0) tei(0)
|
3148
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: 00 01 01 17
|
3149
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:1-T0-S0)) RR received in state LAPD_STATE_MF_EST
|
3150
|
DLLAPD INFO <0016> lapd_core.c:232 ((0:1-T0-S0)) stop T203
|
3151
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T0-S0)) start T203
|
3152
|
DLLAPD INFO <0016> lapd_core.c:1348 ((0:1-T0-S0)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
|
3153
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T0-S0)) TX: 00 01 01 11
|
3154
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T0-S0)) lapd_send_i() called from line 1373
|
3155
|
DLLAPD INFO <0016> lapd_core.c:719 ((0:1-T62-S62)) Timeout T203 state=LAPD_STATE_MF_EST
|
3156
|
DLLAPD INFO <0016> lapd_core.c:239 ((0:1-T62-S62)) new state LAPD_STATE_MF_EST -> LAPD_STATE_TIMER_RECOV
|
3157
|
DLLAPD INFO <0016> lapd_core.c:732 ((0:1-T62-S62)) transmit an RR poll command
|
3158
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T62-S62)) TX: fa 7d 01 1b
|
3159
|
DLLAPD INFO <0016> lapd_core.c:208 ((0:1-T62-S62)) start T200 (timeout=0.300000s)
|
3160
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 4, sapi(62) tei(62)
|
3161
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: fa 7d 01 1b
|
3162
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:1-T62-S62)) RR received in state LAPD_STATE_TIMER_RECOV
|
3163
|
DLLAPD INFO <0016> lapd_core.c:1364 ((0:1-T62-S62)) RR response with F==1, and we are in timer recovery state, so we leave that state
|
3164
|
DLLAPD INFO <0016> lapd_core.c:224 ((0:1-T62-S62)) stop T200
|
3165
|
DLLAPD INFO <0016> lapd_core.c:239 ((0:1-T62-S62)) new state LAPD_STATE_TIMER_RECOV -> LAPD_STATE_MF_EST
|
3166
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T62-S62)) start T203
|
3167
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T62-S62)) lapd_send_i() called from line 1373
|
3168
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 4, sapi(62) tei(62)
|
3169
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: f8 7d 01 1b
|
3170
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:1-T62-S62)) RR received in state LAPD_STATE_MF_EST
|
3171
|
DLLAPD INFO <0016> lapd_core.c:232 ((0:1-T62-S62)) stop T203
|
3172
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T62-S62)) start T203
|
3173
|
DLLAPD INFO <0016> lapd_core.c:1348 ((0:1-T62-S62)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
|
3174
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T62-S62)) TX: f8 7d 01 1b
|
3175
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T62-S62)) lapd_send_i() called from line 1373
|
3176
|
DHODEC DEBUG <0009> handover_decision_2.c:1853 (BTS 0) No congestion check: TRX 0 not usable
|
3177
|
DHODEC DEBUG <0009> handover_decision_2.c:163 HO algorithm 2: next periodical congestion check in 10 seconds
|
3178
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:7) <= len = 4, sapi(62) tei(2)
|
3179
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:7: RX: f8 05 01 01
|
3180
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:7-T2-S62)) RR received in state LAPD_STATE_MF_EST
|
3181
|
DLLAPD INFO <0016> lapd_core.c:232 ((0:7-T2-S62)) stop T203
|
3182
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:7-T2-S62)) start T203
|
3183
|
DLLAPD INFO <0016> lapd_core.c:1348 ((0:7-T2-S62)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
|
3184
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:7-T2-S62)) TX: f8 05 01 01
|
3185
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:7-T2-S62)) lapd_send_i() called from line 1373
|
3186
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 4, sapi(62) tei(0)
|
3187
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: f8 01 01 01
|
3188
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:1-T0-S62)) RR received in state LAPD_STATE_MF_EST
|
3189
|
DLLAPD INFO <0016> lapd_core.c:232 ((0:1-T0-S62)) stop T203
|
3190
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T0-S62)) start T203
|
3191
|
DLLAPD INFO <0016> lapd_core.c:1348 ((0:1-T0-S62)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
|
3192
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T0-S62)) TX: f8 01 01 01
|
3193
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T0-S62)) lapd_send_i() called from line 1373
|
3194
|
DLLAPD INFO <0016> lapd_core.c:719 ((0:10-T3-S62)) Timeout T203 state=LAPD_STATE_MF_EST
|
3195
|
DLLAPD INFO <0016> lapd_core.c:239 ((0:10-T3-S62)) new state LAPD_STATE_MF_EST -> LAPD_STATE_TIMER_RECOV
|
3196
|
DLLAPD INFO <0016> lapd_core.c:732 ((0:10-T3-S62)) transmit an RR poll command
|
3197
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:10-T3-S62)) TX: fa 07 01 01
|
3198
|
DLLAPD INFO <0016> lapd_core.c:208 ((0:10-T3-S62)) start T200 (timeout=0.300000s)
|
3199
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:10) <= len = 4, sapi(62) tei(3)
|
3200
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:10: RX: f8 07 01 01
|
3201
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:10-T3-S62)) RR received in state LAPD_STATE_TIMER_RECOV
|
3202
|
DLLAPD INFO <0016> lapd_core.c:1348 ((0:10-T3-S62)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
|
3203
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:10-T3-S62)) TX: f8 07 01 01
|
3204
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:10-T3-S62)) lapd_send_i() called from line 1373
|
3205
|
DLLAPD INFO <0016> lapd_core.c:1849 ((0:10-T3-S62)) timer recovery, not sending
|
3206
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:4) <= len = 4, sapi(62) tei(1)
|
3207
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:4: RX: f8 03 01 01
|
3208
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:4-T1-S62)) RR received in state LAPD_STATE_MF_EST
|
3209
|
DLLAPD INFO <0016> lapd_core.c:232 ((0:4-T1-S62)) stop T203
|
3210
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:4-T1-S62)) start T203
|
3211
|
DLLAPD INFO <0016> lapd_core.c:1348 ((0:4-T1-S62)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
|
3212
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:4-T1-S62)) TX: f8 03 01 01
|
3213
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:4-T1-S62)) lapd_send_i() called from line 1373
|
3214
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:10) <= len = 4, sapi(62) tei(3)
|
3215
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:10: RX: fa 07 01 01
|
3216
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:10-T3-S62)) RR received in state LAPD_STATE_TIMER_RECOV
|
3217
|
DLLAPD INFO <0016> lapd_core.c:1364 ((0:10-T3-S62)) RR response with F==1, and we are in timer recovery state, so we leave that state
|
3218
|
DLLAPD INFO <0016> lapd_core.c:224 ((0:10-T3-S62)) stop T200
|
3219
|
DLLAPD INFO <0016> lapd_core.c:239 ((0:10-T3-S62)) new state LAPD_STATE_TIMER_RECOV -> LAPD_STATE_MF_EST
|
3220
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:10-T3-S62)) start T203
|
3221
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:10-T3-S62)) lapd_send_i() called from line 1373
|
3222
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:7) <= len = 4, sapi(0) tei(2)
|
3223
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:7: RX: 00 05 01 09
|
3224
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:7-T2-S0)) RR received in state LAPD_STATE_MF_EST
|
3225
|
DLLAPD INFO <0016> lapd_core.c:232 ((0:7-T2-S0)) stop T203
|
3226
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:7-T2-S0)) start T203
|
3227
|
DLLAPD INFO <0016> lapd_core.c:1348 ((0:7-T2-S0)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
|
3228
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:7-T2-S0)) TX: 00 05 01 03
|
3229
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:7-T2-S0)) lapd_send_i() called from line 1373
|
3230
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:10) <= len = 4, sapi(0) tei(3)
|
3231
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:10: RX: 00 07 01 09
|
3232
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:10-T3-S0)) RR received in state LAPD_STATE_MF_EST
|
3233
|
DLLAPD INFO <0016> lapd_core.c:232 ((0:10-T3-S0)) stop T203
|
3234
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:10-T3-S0)) start T203
|
3235
|
DLLAPD INFO <0016> lapd_core.c:1348 ((0:10-T3-S0)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
|
3236
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:10-T3-S0)) TX: 00 07 01 03
|
3237
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:10-T3-S0)) lapd_send_i() called from line 1373
|
3238
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:4) <= len = 4, sapi(0) tei(1)
|
3239
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:4: RX: 00 03 01 09
|
3240
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:4-T1-S0)) RR received in state LAPD_STATE_MF_EST
|
3241
|
DLLAPD INFO <0016> lapd_core.c:232 ((0:4-T1-S0)) stop T203
|
3242
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:4-T1-S0)) start T203
|
3243
|
DLLAPD INFO <0016> lapd_core.c:1348 ((0:4-T1-S0)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
|
3244
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:4-T1-S0)) TX: 00 03 01 03
|
3245
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:4-T1-S0)) lapd_send_i() called from line 1373
|
3246
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 4, sapi(0) tei(0)
|
3247
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: 00 01 01 17
|
3248
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:1-T0-S0)) RR received in state LAPD_STATE_MF_EST
|
3249
|
DLLAPD INFO <0016> lapd_core.c:232 ((0:1-T0-S0)) stop T203
|
3250
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T0-S0)) start T203
|
3251
|
DLLAPD INFO <0016> lapd_core.c:1348 ((0:1-T0-S0)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
|
3252
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T0-S0)) TX: 00 01 01 11
|
3253
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T0-S0)) lapd_send_i() called from line 1373
|
3254
|
DLLAPD INFO <0016> lapd_core.c:719 ((0:1-T62-S62)) Timeout T203 state=LAPD_STATE_MF_EST
|
3255
|
DLLAPD INFO <0016> lapd_core.c:239 ((0:1-T62-S62)) new state LAPD_STATE_MF_EST -> LAPD_STATE_TIMER_RECOV
|
3256
|
DLLAPD INFO <0016> lapd_core.c:732 ((0:1-T62-S62)) transmit an RR poll command
|
3257
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T62-S62)) TX: fa 7d 01 1b
|
3258
|
DLLAPD INFO <0016> lapd_core.c:208 ((0:1-T62-S62)) start T200 (timeout=0.300000s)
|
3259
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 4, sapi(62) tei(62)
|
3260
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: fa 7d 01 1b
|
3261
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:1-T62-S62)) RR received in state LAPD_STATE_TIMER_RECOV
|
3262
|
DLLAPD INFO <0016> lapd_core.c:1364 ((0:1-T62-S62)) RR response with F==1, and we are in timer recovery state, so we leave that state
|
3263
|
DLLAPD INFO <0016> lapd_core.c:224 ((0:1-T62-S62)) stop T200
|
3264
|
DLLAPD INFO <0016> lapd_core.c:239 ((0:1-T62-S62)) new state LAPD_STATE_TIMER_RECOV -> LAPD_STATE_MF_EST
|
3265
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T62-S62)) start T203
|
3266
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T62-S62)) lapd_send_i() called from line 1373
|
3267
|
DLMI DEBUG <0019> e1_input.c:712 E1TS(0:1) <= len = 4, sapi(62) tei(62)
|
3268
|
DLLAPD DEBUG <0016> input/lapd.c:387 0:1: RX: f8 7d 01 1b
|
3269
|
DLLAPD INFO <0016> lapd_core.c:1339 ((0:1-T62-S62)) RR received in state LAPD_STATE_MF_EST
|
3270
|
DLLAPD INFO <0016> lapd_core.c:232 ((0:1-T62-S62)) stop T203
|
3271
|
DLLAPD INFO <0016> lapd_core.c:216 ((0:1-T62-S62)) start T203
|
3272
|
DLLAPD INFO <0016> lapd_core.c:1348 ((0:1-T62-S62)) RR frame command with polling bit set and we are not busy, so we reply with RR frame response
|
3273
|
DLLAPD DEBUG <0016> input/lapd.c:635 ((0:1-T62-S62)) TX: f8 7d 01 1b
|
3274
|
DLLAPD INFO <0016> lapd_core.c:1839 ((0:1-T62-S62)) lapd_send_i() called from line 1373
|
3275
|
^Csignal 2 received
|
3276
|
DNM NOTICE <0004> bsc_init.c:66 shutting down OML for BTS 0
|
3277
|
DTS DEBUG <0010> bts_trx.c:222 timeslot(0-0-0-NONE)[0x556b6665e710]{NOT_INITIALIZED}: Received Event TS_EV_OML_DOWN
|
3278
|
DTS DEBUG <0010> bts_trx.c:222 timeslot(0-0-1-NONE)[0x556b6665ec90]{NOT_INITIALIZED}: Received Event TS_EV_OML_DOWN
|
3279
|
DTS DEBUG <0010> bts_trx.c:222 timeslot(0-0-2-NONE)[0x556b6665f490]{NOT_INITIALIZED}: Received Event TS_EV_OML_DOWN
|
3280
|
DTS DEBUG <0010> bts_trx.c:222 timeslot(0-0-3-NONE)[0x556b6665fc90]{NOT_INITIALIZED}: Received Event TS_EV_OML_DOWN
|
3281
|
DTS DEBUG <0010> bts_trx.c:222 timeslot(0-0-4-NONE)[0x556b66660490]{NOT_INITIALIZED}: Received Event TS_EV_OML_DOWN
|
3282
|
DTS DEBUG <0010> bts_trx.c:222 timeslot(0-0-5-NONE)[0x556b66660d20]{NOT_INITIALIZED}: Received Event TS_EV_OML_DOWN
|
3283
|
DTS DEBUG <0010> bts_trx.c:222 timeslot(0-0-6-NONE)[0x556b666615b0]{NOT_INITIALIZED}: Received Event TS_EV_OML_DOWN
|
3284
|
DTS DEBUG <0010> bts_trx.c:222 timeslot(0-0-7-NONE)[0x556b66661e40]{NOT_INITIALIZED}: Received Event TS_EV_OML_DOWN
|
3285
|
DTS DEBUG <0010> bts_trx.c:222 timeslot(0-1-0-NONE)[0x556b666639f0]{NOT_INITIALIZED}: Received Event TS_EV_OML_DOWN
|
3286
|
DTS DEBUG <0010> bts_trx.c:222 timeslot(0-1-1-NONE)[0x556b66663ef0]{NOT_INITIALIZED}: Received Event TS_EV_OML_DOWN
|
3287
|
DTS DEBUG <0010> bts_trx.c:222 timeslot(0-1-2-NONE)[0x556b666646f0]{NOT_INITIALIZED}: Received Event TS_EV_OML_DOWN
|
3288
|
DTS DEBUG <0010> bts_trx.c:222 timeslot(0-1-3-NONE)[0x556b66664ef0]{NOT_INITIALIZED}: Received Event TS_EV_OML_DOWN
|
3289
|
DTS DEBUG <0010> bts_trx.c:222 timeslot(0-1-4-NONE)[0x556b666656f0]{NOT_INITIALIZED}: Received Event TS_EV_OML_DOWN
|
3290
|
DTS DEBUG <0010> bts_trx.c:222 timeslot(0-1-5-NONE)[0x556b66665ef0]{NOT_INITIALIZED}: Received Event TS_EV_OML_DOWN
|
3291
|
DTS DEBUG <0010> bts_trx.c:222 timeslot(0-1-6-NONE)[0x556b666666f0]{NOT_INITIALIZED}: Received Event TS_EV_OML_DOWN
|
3292
|
DTS DEBUG <0010> bts_trx.c:222 timeslot(0-1-7-NONE)[0x556b66666f80]{NOT_INITIALIZED}: Received Event TS_EV_OML_DOWN
|
3293
|
DTS DEBUG <0010> bts_trx.c:222 timeslot(0-2-0-NONE)[0x556b66668290]{NOT_INITIALIZED}: Received Event TS_EV_OML_DOWN
|
3294
|
DTS DEBUG <0010> bts_trx.c:222 timeslot(0-2-1-NONE)[0x556b66668810]{NOT_INITIALIZED}: Received Event TS_EV_OML_DOWN
|
3295
|
DTS DEBUG <0010> bts_trx.c:222 timeslot(0-2-2-NONE)[0x556b66669010]{NOT_INITIALIZED}: Received Event TS_EV_OML_DOWN
|
3296
|
DTS DEBUG <0010> bts_trx.c:222 timeslot(0-2-3-NONE)[0x556b66669810]{NOT_INITIALIZED}: Received Event TS_EV_OML_DOWN
|
3297
|
DTS DEBUG <0010> bts_trx.c:222 timeslot(0-2-4-NONE)[0x556b6666a010]{NOT_INITIALIZED}: Received Event TS_EV_OML_DOWN
|
3298
|
DTS DEBUG <0010> bts_trx.c:222 timeslot(0-2-5-NONE)[0x556b6666a810]{NOT_INITIALIZED}: Received Event TS_EV_OML_DOWN
|
3299
|
DTS DEBUG <0010> bts_trx.c:222 timeslot(0-2-6-NONE)[0x556b6666b010]{NOT_INITIALIZED}: Received Event TS_EV_OML_DOWN
|
3300
|
DTS DEBUG <0010> bts_trx.c:222 timeslot(0-2-7-NONE)[0x556b6666b8a0]{NOT_INITIALIZED}: Received Event TS_EV_OML_DOWN
|
3301
|
DTS DEBUG <0010> bts_trx.c:222 timeslot(0-3-0-NONE)[0x556b6666cc50]{NOT_INITIALIZED}: Received Event TS_EV_OML_DOWN
|
3302
|
DTS DEBUG <0010> bts_trx.c:222 timeslot(0-3-1-NONE)[0x556b6666d150]{NOT_INITIALIZED}: Received Event TS_EV_OML_DOWN
|
3303
|
DTS DEBUG <0010> bts_trx.c:222 timeslot(0-3-2-NONE)[0x556b6666d950]{NOT_INITIALIZED}: Received Event TS_EV_OML_DOWN
|
3304
|
DTS DEBUG <0010> bts_trx.c:222 timeslot(0-3-3-NONE)[0x556b6666e150]{NOT_INITIALIZED}: Received Event TS_EV_OML_DOWN
|
3305
|
DTS DEBUG <0010> bts_trx.c:222 timeslot(0-3-4-NONE)[0x556b6666e950]{NOT_INITIALIZED}: Received Event TS_EV_OML_DOWN
|
3306
|
DTS DEBUG <0010> bts_trx.c:222 timeslot(0-3-5-NONE)[0x556b6666f150]{NOT_INITIALIZED}: Received Event TS_EV_OML_DOWN
|
3307
|
DTS DEBUG <0010> bts_trx.c:222 timeslot(0-3-6-NONE)[0x556b6666f950]{NOT_INITIALIZED}: Received Event TS_EV_OML_DOWN
|
3308
|
DTS DEBUG <0010> bts_trx.c:222 timeslot(0-3-7-NONE)[0x556b666701e0]{NOT_INITIALIZED}: Received Event TS_EV_OML_DOWN
|
3309
|
|