Projects
| Name | Description |
|---|---|
| OsmoTRX | OsmoTRX is a GSM Radio Modem based on a fork of the OpenBTS Transceiver program. It is intended to be used with the osmo-bts-trx variant of OsmoBTS in order to build GSM base stations with Abis/IP interface from general purpose SDR hardware such as USRP or LimeSDR devices.... |
| OsmoSGSN | |
| OsmoPCU | |
| OsmoGGSN (former OpenGGSN) | OsmoGGSN is an Open Source implementation of a GGSN (Gateway GPRS Support Node). It is the successor to OpenGGSN and provides a Gp (GTP v0/v1) interface towards SGSNs like OsmoSGSN and a Gi interface towards the IP network. It supports Linux kernel GTP-U acceleration via a linux-kernel-gtp-u.... |
| OsmocomBB | OsmocomBB is an Free Software / Open Source GSM Baseband software implementation. It intends to completely replace the need for a proprietary GSM baseband software. |
| OsmoUPF | Osmocom User Plane Function |
| osmo-qcdiag | Osmocom tool for Qualcomm DIAG |
| OsmoSTP | Osmocom STP (Signal Transfer Point), implementing SS7 (MTP) routing and SIGTRAN Signalling Gateway functionality. Supports SIGTRAN only, no legacy E1/T1 based signaling links. Currently only MTP-level routing no GTR or GTT yet, but contributions in that area are very welcome.... |
| OsmoSMLC | Osmocom Serving Mobile Location Center |
| libosmo-sccp + libosmo-sigtran | Osmocom SCCP + Sigtran (M3UA, SUA) library |
| Radio Access Network | Osmocom Radio Access Network (RAN), consisting of projects like osmotrx, osmobts, osmobsc, osmopcu and osmo-hnodeb |
| osmo-fl2k | Osmocom project to (ab)use the DAC inside the FL2000 USB 3.0 VGA adapter to transmit radio frequency |
| osmo-pcap | Osmocom PCAP utilities, such as a distributed client/server capture architecture. It allows a number of PCAP probes on remote hosts, feeding captured packets to a central host in the network. Each probe can have different capture filters. There are multiple options for the protocol between probe and central host.... |
| OsmoMGW | |
| osmo-e1d | Osmocom E1 daemon; used as a "software defined" implementation of E1, where the framer and HDLC controller is implemented inside osmo-e1d and a relatively simple hardware (such as USB attached hardware) interfaces with the actual E1 physical line. |
| Core Network (CN) | |
| osmo-clock-gen | Osmocom Clock Generator board, using the Si5351C clock synthesizer to derive up to 8 different clocks from a single clock reference, such as a 10MHz GPS-DO or OCXO. |
| OsmoCBC | Osmocom Cell Broadcast Centre (CBC). It is the heart of the Cell Broadcast Service (CBS) as well as a variety of disaster/emergency warning systems (PWS). |
| Osmo-CC | Osmocom Call Control. A new, protocol-agnostic way of interfacing call control of various different protocols with each other. Currently used within the osmocom-analog domain and with several endpoints. Endpoints
|
| OsmoBTS | OsmoBTS is an Open Source GSM BTS (Base Transceiver Station) with A-bis/IP interface. It implements support for a variety of PHY/Hardware, such as sysmocom sysmoBTS, OCTSDR-2G and LiteCell 1.5, but also general-purpose SDR boards such as USRP or LimeSDR via OsmoTRX.... |
| OsmoBSCNAT | OsmoBSCNAT is an A-interface aggregator that can aggregate many A-interface links from many BSCs and present them as one A interface towards a MSC. Most normal networks will not need this component, it only serves some special use case scenarios. It requires SCCPLite and doesn't work with 3GPP AoIP.... |
| OsmoBSC | OsmoBSC is an Open Source BSC (GSM Base Station Controller) with A-bis/IP and A/IP interface. It supports a variety of BTS Vendors/Models, including some Siemens, Nokia, Ericsson and ip.access models. However, main focus during the last 5+ years is OsmoBTS based BTSs.... |
| osmo-remsim | osmo-remsim is the Remote SIM software suite used to manage a set of phones/modems and a set of SIM/banks as well as the dynamic mappings of SIM cards to their remote phones/modems. It consists of:
|
| OpenVizsla USB tracer/analyzer | OpenVizsla is a Open Hardware FPGA-based USB analyzer for USB Low-Speed, Full-Speed and High-Speed. Unlike other similar devices on the market, hardware design files are available as well as full source code for the firmware and client software of the device.... |
| OP25 | OP25 is a not-for-profit project to bring together folks that are interested in implementing APCO P25 using a software-defined radio. Our goal is to build a software-defined analyzer for APCO P25 signals that is available under the GNU Public License (GPL).... |
