Project

General

Profile

Projects

Filters

Apply Clear

Name Description
mPCIe WWAN modem USB breakout board

This is a small break-out board for miniPCIe (mPCIe) type cellular / WWAN modems.

It allows you to insert a mPCIe modem from any vendor, and it will provide you with:
  • mini USB socket for connection to a USB Host (like your PC/Laptop or Embedded System)...
multi-voltage USB UART

A small USB UART board with two CMOS UARTs exposed on 2.54mm headers.

The logic voltage can be manually selected at 1.8, 2.3, 2.5, 2.8, 3.0 or 3.3V

OpenVizsla USB tracer/analyzer

OpenVizsla is a Open Hardware FPGA-based USB analyzer for USB Low-Speed, Full-Speed and High-Speed. Unlike other similar devices on the market, hardware design files are available as well as full source code for the firmware and client software of the device....

osmo-clock-conv

The osmo-clock-conv is a small board for low-jitter conversion of a sine clock into a square clock, based around the LTC6957-4.

osmo-clock-gen

Osmocom Clock Generator board, using the Si5351C clock synthesizer to derive up to 8 different clocks from a single clock reference, such as a 10MHz GPS-DO or OCXO.

osmo-lab-rack

Various modules for building lab/testing setups using an industry-standard 3U component carrier

UmTRX

UmTRX is a dual-channel wide-band SDR transceiver that is designed to be used with ​OpenBTS and ​OsmoBTS GSM base stations. Given its SDR architecture UmTRX can easily be used with many other RF applications, and a combination of FPGA and FPRF (Field-Programmable RF) technology plus the ability to process data on a CPU or a DSP, makes it an extraordinarily flexible platform. See UmTRX....

Miscellaneous Projects

This is basically a place-holder for everything else that doesn't fit in other places.

Core testing infrastructure

Issues that have to do with our core testing infrastructure (TTCN3 issues, docker setup) go here.

Issues specific to one test component should still be filed in the respective projects (e.g. osmo-msc).

osmo-uecups
Ericsson RBS 6xxx

This project is an attempt at an independent set of publicly-available documentation of the Ericsson RBS6xxx family of base station products.

GSM Audio Pocket Knife

The GSM Auido Pocket Knife is a small tool that can encode and decode all of the GSM codecs and can convert between various different frame formats, such as the RTP payload formats, those used by the TI Calypso DSP, the Racal 61x3 testers, etc. You can use it as a RTP sink to play back a RTP stream from OsmoBTS. ...

Mobile (in)Security

This website is intended to collect information about publicly-known security issues and other bugs of mobile communications systems, with a particular focus on the 3GPP-specified protocol layers of GSM, GPRS, EDGE and WCDMA. We collect informationon issues at any protocol layer and at any of the interfaces, i.e. the Um air interface just as well as A-bis, A, IuB, C or any of the SS7/MAP/TCAP based core network interfaces....

osmo-modbus

This project targets a C-Language library providing an implementation and interface to manage a Modbus node in a Modbus bus.

This library relies heavily on libosmocore library and it is aimed at being used by applications using that same library.

The Modbus specs can be found here: https://www.modbus.org/specs.php...

osmo-pcap

Osmocom PCAP utilities, such as a distributed client/server capture architecture. It allows a number of PCAP probes on remote hosts, feeding captured packets to a central host in the network. Each probe can have different capture filters. There are multiple options for the protocol between probe and central host....

OsmoSMSC

Scalable Smalltalk/Pharo SMSC with SMPP input and SMPP and SS7 output.

SuperSignal AP 2820V

Research on the Vodafone/Sagem SuperSignal AP 2820V femtocell

OP25

OP25 is a not-for-profit project to bring together folks that are interested in implementing APCO P25 using a software-defined radio. Our goal is to build a software-defined analyzer for APCO P25 signals that is available under the GNU Public License (GPL)....

Open Source IMS Client

Some exploration and hacking towards putting tother an open source IMS (VoLTE, VoWiFi) client

Osmocom Analog

This is a project implementing the analog cellular systems used in Germany and other countries in the past. It provides base station implementation of A-Netz (German pre-cellular), B-Netz (German pre-cellular), C-Netz (German cellular), NMT (Scandinavian: Nordisk Mobil Telefon) and AMPS/TACS (American: Advanced Mobile Phone Service)....

Osmo-CC

Osmocom Call Control. A new, protocol-agnostic way of interfacing call control of various different protocols with each other. Currently used within the osmocom-analog domain and with several endpoints.

Endpoints

Osmocom Conferences (OsmoDevCon, OsmoCon, OsmoDevCall)

The Osmcoom [Developer] Conference, an annual event where Osmocom Developers and Users gather

Osmocom Libraries

This is about a set of shared C programming libraries the Osmocom project develops+maintains, such as libosmocore, libosmovty, libosmo-abis, libosmo-netif, etc.

libosmo-abis

This is the A-bis interface library as used by OsmoBSC/OsmoNITB

libosmo-gprs

This project is a home for several libraries providing common GPRS routines:

  • libosmo-csn1 - CSN.1 (Concrete Syntax Notation 1) codec;
  • libosmo-gprs-rlcmac - RLC/MAC as per 3GPP TS 44.060, TS 44.018;
  • libosmo-gprs-llc - LLC (Logical Link Control) as per 3GPP TS 44.064;...
(51-75/111) Per page: 25, 50, 100, 250

Also available in: Atom CSV

Add picture from clipboard (Maximum size: 48.8 MB)