Percello bootrom version 1.2.8

Board: Frequency: 19.2 Mhz
Board: External boot: enabled
Board: Tcxo: internal
Board: MII mode: forward - Reduce: No
Board: External device: Eth
Board: Diagnostic console: Enabled
Board: Secure mode
Board: Flash type: NAND
Board: flash content detected

Enabling caches
Valid bootloader - Internal mode
PDR execution
Init script wait for 65536
Init script wait for 65536
Init script wait for 256
Init script wait for 560
Init script wait for 522
Init script wait for 6656
Init script wait for 6656
Init script end!!
DDR test ...DDR: lines test ...  PASSED
DDR: block test ...  PASSED
Image loading from NAND to DDR ...PASSED
Secured device - OTP2: verification ...PASSED
Secured device - OTP3: verification ...PASSED
Running Percello bootloader
Nand execute: load_addr: 3fe0000

Percello bootloader version 0.6 (from NAND)
Silicon type: 6000, silicon ver: 1, feature ver: 1, ROM ver: 2

Sagemcom FM-loader v2.0.4-11
Boot 1 (cold) into main system, secured

vol:   size   blocks last_leb name
  0: 0001F800      1        0 "bootdata" 
  1: 0001F800      1        0 "unitdata" 
  2: 004AD000     38       37 "linux-A" 
  3: 004AD000     38       37 "linux-B" 
  4: 007E0000     64       63 "linux-R" 
  5: 00B71800     93       92 "rfs-A" 
  6: 00B32800     91       90 "rfs-B" 
  7: 00372000     28       27 "app-A" 
  8: 00372000     28       27 "app-B" 
  9: 00A17000     62       81 "data-A" 
 10: 0054A800     19       42 "data-B" 
 11: 0001F800      1        0 "bootdata_backup" 
 12: 0001F800      1        0 "caldata" 
 13: 0001F800      1        0 "caldata_backup" 
 14: 0001F800      1        0 "unitdata_backup" 

Unit key found and verified
TrustStor signature check passed
Group A signature check passed
Kernel A signature check passed
Root file system A signature check passed
Application file system A signature check passed
Booting system A...
Linux version (femtobuilder@bilbo.femto.urd1.local) (gcc version 4.4.1 (Sourcery G++ Lite 4.4-303) ) #1 PREEMPT RT Wed Nov 20 13:42:34 CET 2013
ISPRAM0: PA=1f000000,Size=00008000,enabled
DSPRAM0: PA=1f400000,Size=00004000,enabled

LINUX started...
CPU revision is: 59019381 (MIPS 24Kc)
Determined physical RAM map:
 memory: 08000000 @ 00000000 (usable)
User-defined physical RAM map:
 memory: 08000000 @ 00000000 (usable)
Zone PFN ranges:
  Normal   0x00000000 -> 0x00008000
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
    0: 0x00000000 -> 0x00008000
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 32512
Kernel command line: console=ttyS0,115200 prt_disable=0 mtdparts=prc6000-nand.0:0x20000@0(boot),-@0x20000(system) ubi.mtd=system root=/dev/mtdblock7 rootfstype=cramfs ethaddr=d8:6c:e9:14:92:be mem=128M panic=1 ramdisk=2M server= path=/rfs 
PID hash table entries: 512 (order: 9, 2048 bytes)
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
Writing ErrCtl register=00000000
Readback ErrCtl register=00000000
Memory: 123732k/131072k available (3643k kernel code, 7172k reserved, 865k data, 172k init, 0k highmem)
Real-Time Preemption Support (C) 2004-2007 Ingo Molnar
Preemptible RCU implementation.
CPU frequency 614.40 MHz 
Console: colour dummy device 80x25
Calibrating delay loop... 408.78 BogoMIPS (lpj=2043904)
Mount-cache hash table entries: 512
NET: Registered protocol family 16
GPIO: registering PRC6000 chip. Access protect mask = 0x0
PRC6000 FSM: count5us =1ff0000
bio: create slab <bio-0> at 0
Slow work thread pool: Starting up
Slow work thread pool: Ready
FS-Cache: Loaded
CacheFiles: Loaded
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 4096 (order: 3, 32768 bytes)
TCP bind hash table entries: 4096 (order: 4, 114688 bytes)
TCP: Hash tables configured (established 4096 bind 4096)
TCP reno registered
NET: Registered protocol family 1
JFFS2 version 2.2. © 2001-2006 Red Hat, Inc.
fuse init (API version 7.12)
msgmni has been set to 241
alg: No test for cipher_null (cipher_null-generic)
alg: No test for ecb(cipher_null) (ecb-cipher_null)
alg: No test for digest_null (digest_null-generic)
alg: No test for compress_null (compress_null-generic)
alg: No test for stdrng (krng)
alg: No test for stdrng (ansi_cprng)
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler deadline registered
io scheduler cfq registered
Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
serial8250.2: ttyS0 at MMIO 0x1ec01800 (irq = 8) is a 16550A
console [ttyS0] enabled
serial8250.2: ttyS1 at MMIO 0x1ec01c00 (irq = 9) is a 16550A
brd: module loaded
loop: module loaded
nbd: registered device at major 43
Fixed MDIO Bus: probed
IMQ driver loaded successfully.
        Hooking IMQ after NAT on PREROUTING.
        Hooking IMQ before NAT on POSTROUTING.
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <>
STMMAC driver:
        platform registration... 
        DWMAC1000 - user ID: 0x10, Synopsys ID: 0x34
        Enhanced descriptor structure
        eth0 - (dev. name: stmmaceth - id: 0, IRQ #21
        IO base addr: 0xbe800000)
mmi: probed
eth0: PHY ID 004dd043 at 0 IRQ -1 (mii0:00) active
eth0: PHY ID 004dd043 at 1 IRQ -1 (mii0:01)
eth0: PHY ID 004dd043 at 2 IRQ -1 (mii0:02)
eth0: PHY ID 004dd043 at 3 IRQ -1 (mii0:03)
eth0: PHY ID 004dd043 at 4 IRQ -1 (mii0:04)
eth0: PHY ID 00000000 at 16 IRQ -1 (mii0:10)
eth0: PHY ID 00000000 at 17 IRQ -1 (mii0:11)
eth0: PHY ID 00000000 at 18 IRQ -1 (mii0:12)
eth0: PHY ID 00000000 at 19 IRQ -1 (mii0:13)
eth0: PHY ID 40040000 at 20 IRQ -1 (mii0:14)
eth0: PHY ID 00000000 at 21 IRQ -1 (mii0:15)
eth0: PHY ID 00000000 at 22 IRQ -1 (mii0:16)
eth0: PHY ID 00000000 at 23 IRQ -1 (mii0:17)
eth0: PHY ID 00000000 at 24 IRQ -1 (mii0:18)
eth0: PHY ID 00000000 at 25 IRQ -1 (mii0:19)
eth0: PHY ID 00000000 at 26 IRQ -1 (mii0:1a)
eth0: PHY ID 00000000 at 27 IRQ -1 (mii0:1b)
eth0: PHY ID 40040000 at 28 IRQ -1 (mii0:1c)
eth0: PHY ID 00000000 at 29 IRQ -1 (mii0:1d)
eth0: PHY ID 00000000 at 30 IRQ -1 (mii0:1e)
eth0: PHY ID 00000000 at 31 IRQ -1 (mii0:1f)
physmap platform flash device: 04000000 at 18000000
physmap-flash physmap-flash.0: map_probe failed
Unable to find NOR flash in prc_nand_driver
PRC6000 MTD NAND Driver: ECC read delay 11uS, ECC write delay 13uS
NAND device: Manufacturer ID: 0xad, Chip ID: 0xf1 (Hynix NAND 128MiB 3,3V 8-bit)
Scanning device for bad blocks
Bad eraseblock 364 at 0x000002d80000
2 cmdlinepart partitions found on MTD device prc6000-nand.0
Creating 2 MTD partitions on "NAND 128MiB 3,3V 8-bit":
0x000000000000-0x000000020000 : "boot" 
0x000000020000-0x000008000000 : "system" 
UBI: attaching mtd1 to ubi0
UBI: physical eraseblock size:   131072 bytes (128 KiB)
UBI: logical eraseblock size:    129024 bytes
UBI: smallest flash I/O unit:    2048
UBI: sub-page size:              512
UBI: VID header offset:          512 (aligned 512)
UBI: data offset:                2048
UBI: attached mtd1 to ubi0
UBI: MTD device name:            "system" 
UBI: MTD device size:            127 MiB
UBI: number of good PEBs:        1022
UBI: number of bad PEBs:         1
UBI: max. allowed volumes:       128
UBI: wear-leveling threshold:    4096
UBI: number of internal volumes: 1
UBI: number of user volumes:     15
UBI: available PEBs:             0
UBI: total number of reserved PEBs: 1022
UBI: number of PEBs reserved for bad PEB handling: 10
UBI: max/mean erase counter: 216/82
UBI: image sequence number: 1755518098
UBI: background thread "ubi_bgt0d" started, PID 892
i2c /dev entries driver
prc_i2c prc_i2c.0: PRC6000 i2c bus driver. Port 0=Disabled Port 1=Enabled
oprofile: using mips/24K performance monitoring.
u32 classifier
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (2048 buckets, 8192 max)
ctnetlink v0.93: registering with nfnetlink.
IPv4 over IPv4 tunneling driver
TCP cubic registered
NET: Registered protocol family 17
NET: Registered protocol family 15
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
SCTP: Hash tables configured (established 1024 bind 1170)
VFS: Mounted root (cramfs filesystem) readonly on device 31:7.
Freeing unused kernel memory: 172k freed
Welcome to Sagemcom Root File System Version 1.39.0
---- Mounting proc file system
---- Mounting ramdisk with size 32M
---- Remounting /dev/root
---- Starting syslogd
---- Mounting sysfs
---- Mounting debugfs
---- Mounting devpts
---- Creating loopback device
---- Activating Ethernet device
---- Activating firewall
---- Loading percello modules
---- Starting marsupial
---- Reset WD
---- Configuring network using dhcp
Board's MAC address is: D8:6C:E9:14:92:BE
Unit security level: secure
305419857 1 0 0 0
Running out of bank A
Signature check ok: unitdata

WARNING: /unitdata/cert/hnb.key is missing
---- Starting Monitor
net.unix.max_dgram_qlen = 1000

---- Starting StrongSwan
Starting strongSwan 4.3.5 IPsec [starter]...
no default route - cannot cope with %defaultroute!!!
---- Starting FAP

Further reading seems to be another percello based device but with Ubiquisys firmware.

Files (0)

Updated by laforge over 6 years ago · 3 revisions

Add picture from clipboard (Maximum size: 48.8 MB)