= SIMtrace Firmware =

This page will contain all firmware versions as they are released by the Osmocom developers

DFU images only contain the actual SIMtrace application firmware, but not the bootloader (sam7dfu).

They can be installed using '''dfu-util'''. Their installation does not require any jumper-setting or
cable plugging/unplugging.

• Firmware v0.2:
  SAM-BA Image

SAM-BA images contain a full NOR flash image. They can be used in case the sam7dfu bootloader was corrupted,
and can be installed either using the '''sam7''' program released by Atmel, or via JTAG based flashing.

Installing firmware using SAM-BA is a bit cumbersome and requires strict adherence to a sequence of USB cable plugging/unplugging and jumper setting, waiting, jumper removal, etc.

The sourcecode can be found in the [http://git.gnumonks.org/cgi-bin/gitweb.cgi?p=openpcd.git;a=tag;h=3aa065ac48f21ce7c4d0879686fb07b04a60771f v0.2] tag of the git tree of the gnumonks.org git repository.

Currently there is a bug in the firmware that makes the device fail to enumerate on OSX. We provide an alternative hacked firmware until we have resolved the issue properly.