Radvision Scopia 100 P10¶

Bootlog¶

29-04-22 17:55:51.14 |USER INFO|GENERAL MODE|INFO|(gccTask)     GW IN MAINTENANCE MODE
GATEWAY IS ENTERING RESET PROCEDURE
The WATCH DOG Machine is disabled

Entering Flash Reboot Hook! Resetting (wd).....
[2J[H7
6
5
4
3
2
1
0

Main application started. Please wait...
  interval for default reset parameters:1318
Attached TCP/IP interface to motfcc unit 0
Attaching interface lo0...done

Adding 21283 symbols for standalone.

 *** cryptographic mechanism version (C++) :0.9.0

-> [2J[H==============================================================================
CPU              : MPC7410
VxWorks Version  : 5.5
BSP version      : 2.39.8
Created          : Jun 15 2014, 07:35:56
WDB              : Not included
Chassis Type     : ViaIP

==============================================================================
Boot line: motfcc(0,0)gwhost: e=10.23.2.11:FFFF0000 g=10.23.0.1 tn=GW-P10 o=
ViaIP MPC755_MPC8260.
Memory Size: 256 MBytes.
HW Version:0x10
bspSetRoutingTable: Error in routeAdd.
BSP_EXC: Exception hook added
new H110 detected
calling Pre Startup  ... 
MEMORY OK (address: 0x0 - 0x3000)
calling Main Application ... 
==============================================================================
[0;1;0m...
...
...
...
...
...
...
...

 resetToDefaultsFlag 0 
Unit-Type[20009][GLB_HW_MODEL_VIAIP_GW_P10] MainVer[0], LanId[3]
GW Part Number: 55782-00601
GW HW VERSION      B16
GW SW VERSION 5.7.2.1.47-N/A-5.5.1.7-2.6.4.0
Serial No 1443080040
Slot No    1
SYSTEM Board
Product name: Gateway P10
Product family: SCOPIA

 Encryption License ENABLED...
BootLine updated.
New boot line: motfcc(0,0)gwhost: e=10.23.2.11:FFFF0000 g=10.23.0.1 tn=GW-P10 o=
...
DPM init: DSP PMC board contains 0 dsp cores
DPM init: pciFindDevice has failed to find DSP PMC board
DOB exist
DPM not exist
 AT>>INFO: mdHwInit numDobCores: [16] numDpmCores [0] 
 AT>>INFO: mdSwCngInit: MD_DEVICE_SERIAL_TO_PARALLEL_SUPPORT 
 AT>>INFO: mdSwCngInit: MD_DEVICE_SERIAL_TO_PARALLEL_SUPPORT 
 AT>>INFO: mdSwCngInit: MD_DEVICE_G723_TDM_TXD_SUPPORT 
 AT>>INFO: mdSwCngInit: MD_DEVICE_G723_TDM_TXD_SUPPORT 
 AT>>INFO: mdSwCngInit: MD_DEVICE_G723_TDM_TXD_SUPPORT 
 AT>>INFO: mdSwCngInit: MD_DEVICE_G723_TDM_TXD_SUPPORT 
 AT>>INFO: mdSwCngInit: MD_DEVICE_G723_TDM_TXD_SUPPORT 
 AT>>INFO: mdSwCngInit: MD_DEVICE_G723_TDM_TXD_SUPPORT 
 AT>>INFO: mdSwCngInit: MD_DEVICE_G723_TDM_TXD_SUPPORT 
 AT>>INFO: mdSwCngInit: MD_DEVICE_G723_TDM_TXD_SUPPORT 
 AT>>INFO: mdSwCngInit: MD_DEVICE_G729_G722_G728_SUPPORT 
 AT>>INFO: mdSwCngInit: MD_DEVICE_G729_G722_G728_SUPPORT 
 AT>>INFO: mdSwCngInit: MD_DEVICE_G729_G722_G728_SUPPORT 
 AT>>INFO: mdSwCngInit: MD_DEVICE_G729_G722_G728_SUPPORT 
 AT>>INFO: mdSwCngInit: MD_DEVICE_G729_G722_G728_SUPPORT 
 AT>>INFO: mdSwCngInit: MD_DEVICE_G729_G722_G728_SUPPORT 
 AT>>INFO: mdSwCngInit: MD_DEVICE_G729_G722_G728_SUPPORT 
 AT>>INFO: mdSwCngInit: MD_DEVICE_G729_G722_G728_SUPPORT 
...
...
...
...
...

HH: hapiDmaDobTxEnable was = 0

HH: hapiDmaDobRxEnable was = 0

HH: hapiDmaDobTxEnable was changed to = 0

HH: hapiDmaDobRxEnable was changed to = 0
...
...
...
...
...
...
...
VxWorks (for ViaIP MPC755_MPC8260) version 5.5.
Kernel: WIND version 2.6.
Made on Jun 15 2014, 07:35:56.
Boot line:
motfcc(0,0)gwhost: e=10.23.2.11:FFFF0000 g=10.23.0.1 tn=GW-P10 o=
...
...
...
...

 setting log to level 3
>>>> Set logger debug level to: 3

Lan MTU size set to 1500
...
...
...
...
...
...
...
...

    Press any Key To start configuration...

 6
 5
 4
 3
 2
 1
 0

Start Application...

...
...
...
...
...
...
...

29-04-22 17:57:33.91 |DNS|FUNC MESSAGE|ERROR|(tRootTask)     dnsIpSet: ping did not find DNS Server 10.150.0.11routeAdd : errno = 0xffffffff

ROUTE NET TABLE
Destination      Gateway          Flags  Refcnt Use        Interface
--------------------------------------------------------------------
0.0.0.0          10.23.0.1        0x3    0      1          motfcc0
10.23.0.0        10.23.2.11       0x101  3      0          motfcc0
--------------------------------------------------------------------

ROUTE HOST TABLE
Destination      Gateway          Flags  Refcnt Use        Interface
--------------------------------------------------------------------
127.0.0.1        127.0.0.1        0x5    0      0          lo0
--------------------------------------------------------------------
...
...

 **** SSL MECHANISM VERSION 0.9.1 **** 

---motFccMacInterfaceChangeStatus: Same network 
...
...
...
...
...
...
...
...
...
...
...
...
...
...

 IVR - The current number of messages in FLASH is 10
29-04-22 17:57:43.82 |USER INFO|GENERAL MODE|INFO|(gccTask)     GW IN OPERATIONAL MODE...
...
...
...
...

 User Login Table, can not find user admin locations 10.23.4.39

GW: Ready. end of bootup procedure. 
...

29-04-22 17:58:41.25 |USER INFO|FUNC ACTION|INFO|(sdQPriSMTask)     [line 0]: Deactive