Patton Electronics DialFire 2960¶

laforge bought a Patton Electronics DialFire 2960 56K v.90 v.92 and ISDN Dial-In Access Server, which is also a RAS device.

• 16 DSP slots available
• static IP 192.168.200.1/24
• rs232 user/pw: superuser/superuser

Documentation¶

• 10-22-04_RAS_3-51_Software.pdf
• 2960_product_overview.pdf
• Remote Access Solutions Guide.pdf
• Patton_Dialfire_2960_User_Manual.pdf

Boot Log¶

Power Up
Begin: Func Test
End:   Func Test
Begin: Swap Process Control
Begin: Load fixed cache
DRAM: Configure Begin
DRAM:   Detected 33554432 bytes (32 Mbyte)
DRAM: Configure Done
DRAM: Begin
DRAM:   random,  write long, read quad, Filling...
DRAM: Done
FLASH:   Reading status words
FLASH:   Lock status lower word 0x00000000
FLASH:   Lock status high  word 0xF0000000
FLASH:   Manufacture ID 0x000000B0
FLASH:   Component ID 0x000000D4
FLASH: Configure done
Boot Version Mar  8 2002 10:31:16
Boot Indicator: 0082B013
Valid operational code, Hit 'b' three times to stop operational boot.
Warm boot
Running in RAM
Do PCB
Begin: Load fixed cache
Hit escape three times to use debug prompt...No escapes seen, continuing boot
DRAM: Configure Begin
DRAM:   Detected running in DRAM, offsetting base A2336420
DRAM:   Detected 30186464 bytes (28 Mbyte)
DRAM: Configure Done
DRAM: Begin
DRAM:   random,  write long, read quad, Filling...
DRAM: Done
DAX: Begin
DAX:   Silicon Version 37
DAX:   Register access......
DAX:   Test Connections
DAX: Done
WAN0: Begin
WAN0:   Silicon Version 2
WAN0:   Register access............
WAN0:   Interrupts
WAN0: Done
WAN1: Begin
WAN1:   Silicon Version 2
WAN1:   Register access............
WAN1:   Interrupts
WAN1: Done
WAN2: Begin
WAN2:   Silicon Version 2
WAN2:   Register access............
WAN2:   Interrupts
WAN2: Done
WAN3: Begin
WAN3:   Silicon Version 2
WAN3:   Register access............
WAN3:   Interrupts
WAN3: Done
DSP:   Bringing up DSPs
DSP:   Out of reset
DSP: Begin
DSP:   Analyzing configuration

DSP:   Detected Map 0x00000000 0000FFFF
DSP:   Detected 16
DSP:   16 responding

DSP:   Testing Host to DSP interface:

 Random................................
DSP:   Loading image................
DSP:   Validating image................
DSP: Done
FLASH: Begin
FLASH:   Copy Flash to RAM................................
FLASH:   Verify 8-bit cycles................................
FLASH:   Verify 32-bit cycles................................
FLASH:   Verify quad word cycles................................
FLASH: Done
LANINIT: physical address 00.A0.BA.00.10.8E
LAN: Begin
LAN: Done
PCI:   Configuring i960VH Address Translation
PCI:   Done
PCI:   Begin PCI bus test
PCI:   Ethernet chip 82559ER detected
PCI:   Register check ..........................
       Device 21 OK
PCI:   1   Device(s) Found
PCI:   TEST COMPLETE
SERIAL: Begin
SERIAL:   Testing serial registers
SERIAL:   Testing serial interrupts
SERIAL: Done
DSP: Review Begin

DSP:   Testing Host to DSP interface:
 Check ................................
 Check ................................
 Random................................
DSP:   #0 on loop 40668 frame 72912
DSP:   #1 on loop 40682 frame 72937
DSP:   #2 on loop 40696 frame 72962
DSP:   #3 on loop 40710 frame 72988
DSP:   #4 on loop 40724 frame 73013
DSP:   #5 on loop 40738 frame 73038
DSP:   #6 on loop 40752 frame 73063
DSP:   #7 on loop 40766 frame 73088
DSP:   #8 on loop 40780 frame 73113
DSP:   #9 on loop 40794 frame 73139
DSP:   #10 on loop 40808 frame 73163
DSP:   #11 on loop 40825 frame 73193
DSP:   #12 on loop 40841 frame 73222
DSP:   #13 on loop 40857 frame 73251
DSP:   #14 on loop 40874 frame 73281
DSP:   #15 on loop 40890 frame 73309

DSP: Review Done
Halted All DSPs
LED: Begin
LED: Panel ID code 1
LED: Done

DRAM:  base A2336420 size 01CC9BE0 top A4000000
Flash: base FEC00000 size 00400000
DSPs:  found 16 failed 0
DSPs:  Usable Map 0x00000000 0000FFFF
Ethernet physical address 00.A0.BA.00.10.8E
Tests Run...
  DRAM:   TESTED
  DSP:    TESTED
  FLASH:  TESTED
  LED:    TESTED
  T1 A:   TESTED
  T1 B:   TESTED
  T1 C:   TESTED
  T1 D:   TESTED
  LAN:          
  SERIAL: TESTED
  DAX:    TESTED
  PCI:    TESTED

Begin: vars
Vars:  A230EF10
Const: A230EF10
Size:  00027500
Zero:  A2336410
Size:  0022E2C8
Begin: RAM tables
Begin: Load fixed cache
Begin: Flash Init
End:   Flash Init
Begin: Configure OS
Operational Code Version Mar  2 2006 15:37:15
Trying the console
SYSLOG: Task Up

Patton Electronics Company
Model 2960 Remote Access Server
Release 3.5.5 Mar  2 2006 15:37:15