Project

General

Profile

Actions

Osmocom icE1usb

icE1usb-usb_side.jpg

For general information about this open source hardware device (manual, hardware design, schematics, gateware, firmware, ...), see icE1usb.

In case anyone is interested in purchasing a fully assembled icE1usb for retronetworking purpose, sysmocom is offering radical discounts if you contact and explain what you want to use it for.

Using the icE1usb with DAHDI driver to provide a S2m line

This configuration will provide an S2m line that behaves like a german Primärmultiplexanschluss/PMX.
The framing/checksumming configuration required might be different for other countries.

The icE1usb ships in TE mode. You either need to use an E1 cross-over cable or change the jumpers inside the icE1usb.
Ethernet cross-over cables are different and do not work!

/etc/dahdi/system.conf:

# Span 1: icE1usb/1/0 "Osmocom icE1USB Card 1 Span 0" (MASTER) 
span=1,0,0,ccs,hdb3,crc4
# termtype: nt
bchan=1-15,17-31
dchan=16

# Global data
loadzone        = de
defaultzone     = de

Apply the config using:

dahdi_cfg -v

Then create the span assignments using:

dahdi_span_assignments dumpconfig > /etc/dahdi/assigned-spans.conf

To use Asterisk, create /etc/asterisk/dahdi-channels.conf:

; This is not intended to be a complete chan_dahdi.conf. Rather, it is intended
; to be #include-d by /etc/chan_dahdi.conf that will include the global settings
;

; Span 1: icE1usb/1/0 "Osmocom icE1USB Card 1 Span 0" (MASTER) 
group=0,11
context=from-pstn
switchtype = euroisdn
signalling = pri_net
channel => 1-15,17-31
context = default
group = 63

and /etc/asterisk/chan_dahdi.conf:

[trunkgroups]

[channels]
language=de
switchtype=euroisdn

echocancel=no
echocancelwhenbridged=no

transfer=no

pridialplan=unknown
prilocaldialplan=unknown
internationalprefix = 00
nationalprefix = 0
overlapdial=yes

#include dahdi-channels.conf

(careful: that #include is not a comment)

Files (1)
icE1usb-usb_side.jpg View icE1usb-usb_side.jpg 1.87 MB laforge, 11/20/2022 10:44 AM

Updated by laforge over 1 year ago · 4 revisions

Add picture from clipboard (Maximum size: 48.8 MB)