Project

General

Profile

Actions

Blatzheim BM-33k6/ISDN pro

ISDN TerminalAdapter with integrated V.34+ Modem.
http://www.blatzheim.com/Produkte.produkte.0.html

The device also has support for autonomous sending of SMS and FAX.

Manual

Hardware

Supply Voltage 10-24V AC/DC
Power Consumption ~3.9W
Power Connector ELSA style
RS232 Connector DB9
Line Connector RJ45
AUX Connector RJ45

Blatzheim-BM-33k6-ISDN-front.jpg Blatzheim-BM-33k6-ISDN-back.jpg Blatzheim-BM-33k6-ISDN-pcb-front-4.jpg Blatzheim-BM-33k6-ISDN-pcb-front-5.jpg Blatzheim-BM-33k6-ISDN-pcb-front-1.jpg Blatzheim-BM-33k6-ISDN-pcb-front-2.jpg Blatzheim-BM-33k6-ISDN-pcb-front-3.jpg Blatzheim-BM-33k6-ISDN-pcb-back.jpg

  • Cypress CY7C109D (1-Mbit (128K x 8) Static RAM) CY7C109D.pdf
  • 2 x BSI BS62LV1027TIP55 (128K x 8 bit CMOS SRAM) BS62LV1027.pdf
  • Freescale MC68302EH25C (Quad HDLC Integrated Multiprotocol Processor) MC68QH302.pdf
    ...
    ...
    ...

Label

BM-33k6/ISDN pro
Blatzheim Datensysteme GmbH, Bonn
SN:0125- 00182 09 11    Made in Germany

AT commands

Information

ATI
BM-33k6/ISDN pro
(c) by BLATZHEIM Datensysteme GmbH, Bonn - GERMANY

OK
ATI0
BM-33k6/ISDN pro
(c) by BLATZHEIM Datensysteme GmbH, Bonn - GERMANY

OK
ATI1
255
205
BM-33k6/ISDN pro v3.60 released 13.05.08
Blatzheim Datensysteme GmbH, Bonn

OK
ATI2
OK
ATI3
BM-33k6/ISDN pro v3.60 released 13.05.08

OK
ATI4
BM-33k6/ISDN pro v3.60 released 13.05.08
Blatzheim Datensysteme GmbH, Bonn

MODEM CHIP : ROCKWELL RC336DPI
FAX CLASS 1, 2 and 2.0

OK
ATI5
Urloader Version 1.00

OK
ATI6
Main Board Release 2

OK
ATI7
OK
ATI8
EC Version 1.00

OK
...
...
...
ATI12
BM33k6/ISDN pro: includes Rockwell V.34+ Modem

OK
...
...
...
ATI20
Befehl:  RemLvl:
'B'         1
'E'         2
'H'         0
'I'         0
'L'         1
'M'         1
'O'         0
'Q'         2
'S'         0
'V'         2
'X'         3
'Y'         3
'\A'        1
'\C'        1
'\E'        1
'\F'        0
'\G'        1
'\J'        1
'\K'        1
'\L'        1
'\N'        1
'\Q'        2
'\T'        1
'\V'        2
'\X'        2
'&C'        2
'&D'        2
'&E'        1
'&G'        1
'&H'        0
'&K'        1
'&L'        1
'&M'        2
'&O'        1
'&R'        2
'&S'        2
'&V'        0
'&W'        3
'&X'        2
'&Y'        3
'&Z'        3
'%A'        1
'%C'        1
'%E'        1
'%L'        1
'%P'        3
'%Q'        0
'%R'        0
'%XADR'     2
'%XDTE'     2
'%XFAC'     2
'%XLADR'    2
'%XNR'      2
'%XNUI'     2
'%XP'       2
'%XUSR'     2
'%&$!XY='   3
'='         2
'?B'        0
'?H'        0
'?O'        0
'?'         0
'*B'        1
'*D'        2
'*KEY'      3
'*L'        3
'*M'        2
'*R'        1
'*T'        2
'*FAVL'     2
'*FMEM'     2
'*FSIZ'     2
'*VMEM'     2
'$AUXON'    3
'$AUXTST'   3
'$AUXDEF'   3
'$AUXSET'   3
'$AUXMFVPW' 3
'$AUXTIME'  3
'$AUXTFACT' 3
'$AUXSER'   3
'$AUXSMS'   3
'$AUXDIAL'  3
'$AUXPULS'  3
'$SMSSMSC'  3
'$SMSNR'    3
'$FAXNR'    3
'$FAXSEND'  3
'$FAXID'    3
'$SMSSEND'  3
'$SMSTXT'   3
'$FAXTXT'   3
'$SMSLST'   3
'$FAXLST'   3
'$SMSAC'    3
'$SMSORG'   3
'$SMSSTATE' 3
'$SMSSTOP'  3
'$SMSRETRY' 3
'$FAXRETRY' 3
'$SMSEVT'   3
'$SMSFLVL'  3
'$SMSFNR'   3
'$SMSFNC'   3
'$SMSFN'    3
'$SMSFL'    3
'$SMSFPW'   3
'$SMSFS0'   3
'$SMSFRD'   3
'$SMSFRC'   3
'$A'        1
'$CCLR'     3
'$CPL'      3
'$CP'       3
'$CW'       3
'$C'        3
'$DL'       3
'$DP'       3
'$DU'       3
'$D'        3
'$E'        3
'$FCLR'     3
'$FPL'      3
'$FP'       3
'$F'        3
'$I'        3
'$J'        3
'$K'        3
'$L'        3
'$M'        3
'$NCLR'     3
'$NNL'      3
'$NN'       3
'$N'        3
'$O'        3
'$P'        3
'$R'        3
'$S'        3
'$V'        3
'$X'        3
'$H'        3
'+MS'       3

OK
ATI21
erstellt am 13.05.2008

OK
ATI22
PIN: 59H0O90000

OK
ATI23
Mainboard HW Version: 1

OK
...
...
...
ATI40
Urlader Version 1.01 vom 10.06.03
(c) 2003 Blatzheim Datensysteme GmbH
D-53173 Bonn, Germany

OK
...
...
...
ATI57
Urlader Version 1.01 vom 10.06.03
(c) 2003 Blatzheim Datensysteme GmbH
D-53173 Bonn, Germany

OK
...
...
...
ATI61
V.34 Board Release 2 V1.78 16.06.05

OK
...
...
...
ATI69
DIP-Sw  1   2   3   4
       On  On  On  On 

OK
...
...
...
ATI90
PIN: 59H0O90000

OK
...
...
...
ATI95
(c) 2003 Blatzheim Datensysteme GmbH Bonn Germany

OK
...
...
...
ATI99
PIN2: 59H0O90000

OK

Important settings

# set MSN (up to 8)
AT$M0=5210
AT$M1=5211

# show MSN (including MSN to service mappings)
AT&V10

# show status (e.g. ISDN layer1)
AT&V

# set ISDN protocol (see table below for possible values for x)
AT$Px

0  = V.110, abhängig von der DTE-Rate
1  = V.110, 9.600 bit/s
2  = V.110, 19.200 bit/s
3  = RESERVIERT
4  = V.120
5  = X.75 (Standardvorgabe)
6  = X.75 transparent, synchron 7
7  = X.75 transparent, Flag-Stuff
8  = X.75 T.70NL (früher z.B. für T-Online)
9  = RESERVIERT
10 = RESERVIERT
11 = Async. PPP auf sync. PPP (i.d.R. für Internet-Verbindungen)

ISDN call

ISDN X.75 call to 12345

AT$P5
ATD12345

Analog call

Analog calls can be forced with an exclamation mark in the end of the called number

Analog call to 56789

ATD56789!

Integrated ISDN D-channel debugger

ANSI colored example debug output

The debugger can be started via register S104.

Register S104
Bit Value0 Value1
Bit0 1 = Debugger enabled 0 = disabled
Bit1 reserved
Bit2 0 = background recording 1 = continuous output
Bit3 0 = continuous recording 1 = abort when buffer is full
Bit4 0 = record 64 frames 1 = record 512 frames
Bit5 0 = no HEX output 1 = HEX output
Bit6 0 = no text output 1 = output decoded text
Bit7 0 = no ANSI colors 1 = with ANSI colors
AT command description
ATS104 Activate Debug
AT*ZDIA Debug output in dialog mode (see manual page 45 for details)
AT*ZLST Show all recorded Debug output
AT*ZINF Show Debug Information (settings, ...)
AT*ZCLR Clear Debug memory

Run the debugger

AT*Z
ATS104=255
AT*ZINF

Autonomous FAX

AT$FAXTXT    set message to send (you can store up to 12 messages)
AT$FAXNR     set fax recpient numbers
AT$FAXSEND   send fax
AT$FAXID     set fax sender ID
AT$FAXRETRY  set number of retries
# define message (index 0)
AT$FAXTXT 0="000 TEST TEST TEST 000" 

# define message (index 5)
AT$FAXTXT 5="555 TEST TEST TEST 555" 

# query message (index 0)
AT$FAXTXT 0?

# query message (index 5)
AT$FAXTXT 5?

# query alls defined messages
AT$FAXTXT ?

# define fax recipient (index 0) -> number "5280" 
AT$FAXNR 0=5280,f

# define fax recipient (index 1) -> number "5220" 
AT$FAXNR 1=5220,f

# show all defined fax recpients
AT$FAXNR ?

# send fax with text from $FAXTXT (index 5) to the number defined in $FAXNR (index 0)
AT$FAXSEND=0,5
Files (14)

Updated by roox about 1 year ago · 2 revisions

Add picture from clipboard (Maximum size: 48.8 MB)