Project

General

Profile

Actions

Wiki » History » Revision 11

« Previous | Revision 11/33 (diff) | Next »
laforge, 02/21/2016 02:51 PM


OsmoBTS

OsmoBTS is a software implementation of Layer2/3 of a BTS. It implements the follwing protocols/interfaces:
  • LAPDm (GSM 04.06)
  • RTP
  • A-bis/IP in IPA multiplex
  • OML (GSM TS 12.21)
  • RSL (GSM TS 08.58)

OsmoBTS is building up on work done previosuly for OpenBSC (RSL, OML, RTP) and OsmocomBB (LAPDm). The Abis/IP protocol staking is inspired by ip.access A-bis/IP, sometimes called IPA multiplex.

OsmoBTS in the Osmocom architecture

Backends / Hardware support

OsmoBTS is modular and has support for multiple back-ends. A back-end talks to a specific L1/PHY implementation of the respective BTS hardware. Based on this architecture, it should be relatively easy to add a new back-end to support so-far unsupported GSM PHY/L1 and associated hardware.

So far OsmoBTS has been integrated with several different L1/PHY and hardware systems. The backends are:
  • osmo-bts-sysmo
    • Multiple indoor and outdoor BTS products called sysmoBTS which is sold by sysmocom
  • osmo-bts-trx
    • Wideband SDR transceiver hardware supported by OpenBTS transceiver or [OsmoTRX] PHY layer software, including the UmTRX, the USRP family, etc.
    • Multiple indoor and outdoor fairwaves BTSs, like UmDESK and UmSITE
  • osmo-bts-bb
    • A pretty crazy experimental BTS hardware based on two OsmocomBB phones had originally been supported, but needs to be re-integrated with core code changes.

Status

The source code includes a http://cgit.osmocom.org/cgit/osmo-bts/tree/README file with current status information

GPRS support

osmo-bts has recently been extended with a socket interface towards osmo-pcu. This adds GPRS (and later EDGE) support to it.

Source code

The source code is available from git.osmocom.org (module osmo-bts).

Public read-only access is available via
git clone git://git.osmocom.org/osmo-bts.git
You can browse it via cgit: http://cgit.osmocom.org/cgit/osmo-bts/

Authors / Credits

OsmoBTS was originally developed in 2011 by Andreas Eversberg and Harald Welte.

Today it is mostly maintained by Harald Welte and Holger Freyther at sysmocom. Exception is the osmo-bts-trx back-end which is maintained by Fairwaves.

Files (0)

Updated by laforge about 8 years ago · 11 revisions

Add picture from clipboard (Maximum size: 48.8 MB)