Project

General

Profile

Actions

HSL Femtocell Hardware

*NOTE: All information on this website is gathered on our own, without any cooperation of the manufacturer. There is no guarantee of correctness. There is no relationship between HSL and the OpenBSC project developers!

Overview

The HSL femtocell hardware consists of two boards: A digital board with the ARM, DSP and FPGA,
as well as the radio board, containing the ADC/DAC/oscillator/mixer/filter/duplexer.

Both boards are interconnected using a small adapter board. This adapter board also contains
the Ethernet jack (including magnetics).

Digital Board

The digital board contains a placement option for a GPS module

picture of HSL femtocell main digital PCB

Main Processor

FPGA

Power Management

Ethernet MAC

Memory

Miscellaneous

RF board

So far we have only documented those parts that are not under the massive shielding cover.

The RF board contains a placement option for an OCXO.

picture of HSL femtocell radio PCB

ADC

DAC

Rx Mixer

Clocking

Miscellaneous

2x TI 16bit buffers/drivers (sn54? LVC16244)
http://focus.ti.com/docs/prod/folders/print/sn54lvth16244a.html
http://www.ti.com/lit/gpn/sn54lvth16244a

RF Power Amplififer

Duplexer / Circulator

  • ACCUTE 100610 Duplex Filter SRP1747F1842N10N75FAI

Receive filter

  • ACCUTE 100610 Rx Band Filter SRP1747N10N75FV
Files (2)
hsl_femto_digital_pcb.jpg View hsl_femto_digital_pcb.jpg 512 KB picture of HSL femtocell main digital PCB laforge, 01/15/2011 06:48 PM
hsl_femto_radio_pcb.jpg View hsl_femto_radio_pcb.jpg 498 KB picture of HSL femtocell radio PCB laforge, 01/15/2011 06:48 PM

Updated by laforge about 8 years ago · 9 revisions

Add picture from clipboard (Maximum size: 48.8 MB)