Project

General

Profile

BS11RJ45mod » History » Version 1

dexter, 02/19/2016 10:47 PM

1 1 dexter
2
==Info:==
3
4
The twinax connectors as you find it on your BS-11 are very reliable connectors - when you have the right cable attached. However twisted pair cable is the wrong cable! The thin twisted wires do not fit correctly into the connector. The pins have no stability, they slip into the connector while you plug it in. To manage this problem we had a simple idea: Why not add an RJ45 jack to use a regular network cable?
5
6
==Pulling the bulkhead out:==
7
8
The first thing you have to do is to pull the bulkhead out. This is easy to perform. On the upper corners you will find plastic levers that can be moved aside by twisting them with a skrewdriver. Do not loose the skew - it works just by twisting the levers aside. After that you can pull the bulkhead by pulling on the two plastic rings. 
Add picture from clipboard (Maximum size: 48.8 MB)