Baseband 6630 » History » Version 3
zarya, 09/05/2022 05:46 PM
1 | 1 | zarya | h1. Baseband 6630 (KDU 137 848/11) |
---|---|---|---|
2 | |||
3 | Ericsson Baseband 6630 Digital Unit is 5G Ready and Full Mixed-mode – It runs GSM, WCDMA, LTE and IoT concurrently on a single Baseband board and ready for 5G. |
||
4 | |||
5 | h2. Connectors |
||
6 | |||
7 | h3. Power (-48v) |
||
8 | |||
9 | 3 | zarya | Connector type: ET20 A (https://www.te.com/usa-en/product-2204534-1.html) |
10 | 2 | zarya | Possible cable options: |
11 | |||
12 | |_.SKU|_.Description| |
||
13 | | RPM 777 526/L | 2 wire ET connector to 3 wire ET connector used for Power 6610. | |
||
14 | | RPM 777 527/L | 3 wire with open end. | |
||
15 | | RPM 777 528/L | 3-wire with loop to 2-wire open end. | |
||
16 | |||
17 | Lengths 01000, 02500, 05000, 10000. |
||
18 | 1 | zarya | |
19 | 3 | zarya | The unit supports 3-wire (DC-I) power feed. It can also support 2-wire (DC-C) power feed by making a jumper |
20 | connection in the power cable. |
||
21 | |||
22 | 1 | zarya | h3. TN (A,B,C,D) |
23 | |||
24 | h3. IDL (A,B) |
||
25 | |||
26 | These ports are used for connecting 2 base-bands together |
||
27 | |||
28 | h3. CPRI (A-Q) |
||
29 | |||
30 | These ports are used for connecting the radio units (RU and/or RRU) |
||
31 | |||
32 | h3. Sync |
||
33 | |||
34 | 3 | zarya | Local GPS connection (can also be done via IP/TN ports) |
35 | 1 | zarya | |
36 | h3. SAU |
||
37 | |||
38 | 3 | zarya | Interface for connection of a Support Alarm Unit |
39 | |||
40 | 1 | zarya | h3. LMT |
41 | |||
42 | Local management access |
||
43 | Base Band IP 169.254.2.2/16 |
||
44 | |||
45 | h3. EC |
||
46 | |||
47 | 3 | zarya | Enclosure Control Bus (ECB), possibly rs485 |
48 | 1 | zarya | |
49 | h3. Alarm (1 & 2) |