CC32RS512JTAG » History » Revision 2
Revision 1 (laforge, 02/19/2016 10:49 PM) → Revision 2/3 (laforge, 02/19/2016 10:49 PM)
= CC32RS512 JTAG = If the CC32RS512 is packaged in a DIL package for use on a development board, its ARM-JTAG is exposed on pads and available for hardware assisted debugging, flashing, etc. The osmo-cos.git repository has an example OpenOCD configuration file, as well as a patch for adding support for the CC32RS512 internal flash controller. * http://cgit.osmocom.org/cgit/osmo-cos/tree/openocd/0001-Add-a-flash-driver-for-the-CC32RS512-internal-flash-.patch * http://cgit.osmocom.org/cgit/osmo-cos/tree/openocd/cc32rs512.cfg == flashing binary code from a file == You can use the following command to flash the contents of /my/local.file into flash starting at base address 0x40000. {{{ reset halt flash write_image erase /my/local.file.bin 0x40000 }}} You can verify the result by looking at the memory at 0x40000: {{{ mdw 0x40000 10 }}} == erasing flash == You can use the following command to erase 512 bytes of flash: {{{ flash erase_address 0x40000 512 }}}