Accelerate3g5 -- andreas » History » Revision 36

« Previous | Revision 36/44 (diff) | Next »
anmu, 05/13/2017 01:09 PM

Accelerate3g5 -- andreas

Summary and Ideas

Main goal is testing the 3g network based on free open source software from osmocom-project and a nano3G femotcell from ip.access with different test devices (TD)
  • TD1: Acer Liquid M330, Dual-SIM Windows Phone E3336 with Windows10 Mobile
  • TD2: LG G3 LG-D855 android Phone with Android 7.1.1 (LineageOS 14.1 nightly build)
  • TD3: Samsung Galaxy Tab2 10.1 GT-P5100 with Android 4.4.4 (CyanogenMod 11 nightly build)
  • TD4: Huawei HSPA+ USB stick E1823 (used mainly with debian8)
  • TD5: iPhone5 with iOS 10.3.1
  • TD6: Huawei HSPA+ USB stick E1823

Another aim is to extend the documentation and to share my experiences compiling, installing and configuring the software to help users with little or no experiences with UMTS-networks.


2017-03-08 The nano3G femotcell arrived.

2017-03-13 Software is running. First successful registration of TD2 and TD3

2017-03-19 Successfully tested voice-calls and sending SMS between TD1, TD2, TD3

2017-03-26 TD1, TD2 and TD3 have internet-connection via HSDPA.
Results of browser-based internet speedtests of devices connected to the nano3G with an internet connection of 250 Mbit/s down and 20 MBit/s upstream:
  • TD1: 5852 kbit/s downstream and 488 kbit/s upstream
  • TD2: 6430 kbit/s down- and 481 kbit/s upstream.

2017-03-31 First tests with TD4 and wvdial/pppd: Connection worked, but Modem hangup after CHAP-authentification

2017-04-01 Using the latest sources from git with TD4 the pppd now gets an IP-address.

2017-04-08 After changing the wvdial.conf to force the TD4 to register on the UMTS-network, with "AT+CREG"-command, the IP-connection via pppd is working now.
Results of browser-based internet speedtests of devices connected to the nano3G with an internet connection of 250 Mbit/s down and 20 MBit/s upstream:
  • TD4: 6871 kbit/s downstream and 438 kbit/s upstream

2017-04-20 New Testing devices arrived: An iPhone5 with iOS 10.3.1 and another Huawei HSPA+ USB stick E1823


Problems, issues, topics which came up during the setup of the nano3G, configuration of the software and running the 3G-network.
Some of this points here may be included in the main documentation, some may be deprecated, so please refer to the main documentation for
Configuring the ip.access nano3G and Getting started with 3G


Q: Is it possible to use a USIM-card from a commercial provider?
A: No, you need to know the Ki-key which cannot be read from the USIM-card.

Q: Is it possible to use a SIM-card?
A: No, only USIM-cards work with the 3G-network.


Q: How can I set up the nano3G femtocell as described in Configuring the ip.access nano3G automatically?
A: It is possible to use netcat (nc) to pipe the needed commands to the nano3G, assuming it has as IP address:
echo -e 'action 2061\naction 1216\naction establishPermanentHnbGwConnection'|nc -v 8090


Q: How to create the HLR?
A: Use the hlr.sql included in osmo-hlr software and create the HLR with: cat hlr.sql | sqlite3 hlr.sqlite3
[neels: added this to the main getting started guide, thanks!]

Files (1)
wvdial.conf wvdial.conf 307 Bytes anmu, 04/16/2017 11:19 PM

Updated by anmu almost 7 years ago · 36 revisions

Add picture from clipboard (Maximum size: 48.8 MB)