wireshark is a popular Free Software / Open Source protocol analyzer. Among many
other protocols, it includes dissectors for the GSM Layer 2 (TS 04.06 / LAPDm) and 3 (TS 04.8 04.08 / RR,MM,CC).
There also is a GSMTAP protocol dissector in recent wireshark versions, which allows
real-time capture and decode of GSM protocol messages encapsulated in a GSMTAP (pseudo-header,
which is in turn encapsulated in UDP and IP).
of the loopback interface (lo). Please note that the wireshark program is doing passive capture,
i.e. if nothing is listening on the GSMTAP UDP port (4729), then you will see ICMP port unreachable
messages in addition to the GSMTAP messages. There are two suggested solutions to this:
- Change the IP address to a multicast group like 184.108.40.206 (instead of 127.0.0.1)
- Run some program that simply opens the UDP port and discards its content, e.g. using
nc -u -l -p 4729 > /dev/null