Serial Cable » History » Revision 14
Revision 13 (tsaitgaist, 02/19/2016 10:48 PM) → Revision 14/31 (steve-m, 02/19/2016 10:48 PM)
The Calypso phones typically all have a serial port @ 3.3V levels on the 2.5mm earphone jack.
Those cables are sometimes called ''T191 unlock cable''.
You can either buy ready-made cables, e.g. at:
* USB variant
* [http://www.gsmliberty.net/shop/motorola-t191-dataunlock-cable-p-1252.html gsmliberty.net]
* [http://www.fonefunshop.co.uk/datacables/motorola.htm fonefunshop.co.uk]
* [http://gsmserver.com/cables/Smart-Clip_Cable_for_Compal_Chi_Mei_based_phones.php gsmserver]
* RS232 variant, you still need a separate standard USB/RS232 cable
* [http://www.handy-style.de/index/cat190/2130 handy-style.de]
* [http://www.cellcorner.com/xshp/unlock-phone-codes/motorola-t190-t191-t193-unlock-data-cable.html cellcorner.com]
* USB/RS232 cable
* [http://www.tronisoft.com/cat_usbtoserial.php tronisoft.com] (FTDI and Prolific cables)
Or you can build it yourself (detailed instructions can be found on the net, search for "t191 unlock cable" or the like).
* TxD is at the tip of the plug (PC to Device)
* RxD is at the middle contact (Device to PC)
* GND is the outer contact
== Hints and Warnings ==
* If you don't use a 3.3V (low voltage TTL, LVCMOS) serial port you can fry your phone! (internally, it connects to the IO-pins of the baseband processor which run at 2.8V). '''Don't connect directly to your PCs serial port (running at +/- 12V!).'''
* If your development system is virtualized (runs inside VMware, Virtualbox, Parallels...) the connections can be unreliable (the loader protocol is timing critical).
* Your safest bet is a USB cable with a FTDI chip (FTx232) configured for operation at 3.3V connected to a machine running Linux natively. Prolific chips (PL2303) also work, but are far less reliable.
* If you want to communicate with the Calypso at baudrates higher than 115200 bps, you'll have to resort to non-standard baudrates. These are also supported best using a FTDI or [wiki:CP210xTutorial CP210x] based USB adapter cable.