MotorolaC140 » History » Version 6
Anonymous, 02/19/2016 10:48 PM
Show photo.
| 1 | 1 | laforge | = Motorola C140 = |
|---|---|---|---|
| 2 | |||
| 3 | The internal name of the hardware is E86 |
||
| 4 | |||
| 5 | 3 | laforge | [[Image(c140_front.jpg)]] |
| 6 | [[Image(c140_battery_compartment.jpg)]] |
||
| 7 | |||
| 8 | 1 | laforge | The shielding covers of this model are soldered, not snap-on :( |
| 9 | 2 | laforge | |
| 10 | 5 | laforge | == Specification == |
| 11 | |||
| 12 | * GSM 900 / GSM 1800 dual-band |
||
| 13 | * 101 x 47,8 x 21,9 mm, 80 grams |
||
| 14 | * 920mAh Li-Ion battery |
||
| 15 | * TI Calypso/Iota/Rita chipset |
||
| 16 | |||
| 17 | == Hardware == |
||
| 18 | |||
| 19 | 6 | laforge | [[Image(Motorola_c140_board_pcb.jpg, 500px)]] |
| 20 | |||
| 21 | 5 | laforge | '''GSM Chipset:''' |
| 22 | * DBB: TI Calypso Baseband, D751749ZHH model (Calypso Lite G2), includes 256kBytes of internal SRAM |
||
| 23 | * ABB: TI TWL3025BZ |
||
| 24 | * RF: TRF6151CJ |
||
| 25 | * RF PA: SKY77325-12 |
||
| 26 | |||
| 27 | '''Flash / SRAM:''' |
||
| 28 | * Intel (RD38F)1010C0ZTLO |
||
| 29 | * Stacked-CSP Flash Stacked Memory (32MBit flash, 4MBit SRAM, Advanced Boot Block Flash Memory, 3.0V I/O, Top Blocking) |
||
| 30 | |||
| 31 | '''Display:''' |
||
| 32 | * Toppoly TD014THEA3 (1.4 inch LCD, 96 x 64, 64K colors) |
||
| 33 | * Controller: Unknown (integrated?) |
||
| 34 | |||
| 35 | '''Test points:''' |
||
| 36 | * Test points surrounding Iota: |
||
| 37 | * Test points surrounding Calypso: |
||
| 38 | * Test points accessible from battery compartment: |
||
| 39 | |||
| 40 | 2 | laforge | == Miscellaneous == |
| 41 | |||
| 42 | === Bootloader === |
||
| 43 | |||
| 44 | The loader is pretty much identical to the loader in the C123. However, it has one additional nastiness: |
||
| 45 | * After the download has completed, it expects the magic string "1003" (0x31 0x30 0x30 0x33) at the RAM address 0x803ce0 |
||
| 46 | 4 | steve-m | * Use the osmoload model-switch "-m c140/c140xor" and upload the [wiki:Bootloader], and use osmoload to load the application (e.g layer1.osmoload.bin) |
