Project

General

Profile

Filter Replacement » History » Version 7

Anonymous, 02/19/2016 10:48 PM
Name changed from FilterReplacement to Hardware/FilterReplacement

1 1
== Motorola filter replacement ==
2
3
To replace filters on Motorola phones you will need:
4
5
 * [http://search.digikey.com/scripts/DkSearch/dksus.dll?vendor=0&keywords=HHM1526 HHM1526]
6
 * [http://search.digikey.com/scripts/DkSearch/dksus.dll?vendor=0&keywords=HHM1523C1 HHM1523C1]
7
 * [http://search.digikey.com/scripts/DkSearch/dksus.dll?vendor=0&keywords=04025A150JAT2A 04025A150JAT2A]
8
 * [http://search.digikey.com/scripts/DkSearch/dksus.dll?vendor=0&keywords=04025A220JAT2A 04025A220JAT2A]
9
10 6
As the shipping cost for such a small-quantity order is relatively high, a complete component kit is
11
 available for online order from http://shop.sysmocom.de/products/osmocombb-filter-kit
12 5 laforge
13
14 2
=== Remove existing baluns ===
15
16
First you will need to remove existing balun:
17
18
[[Image(motorola_filter_replacement_step_1_low.jpg, 250px)]]
19
[[Image(motorola_filter_replacement_step_2_low.jpg, 250px)]]
20
21
=== Solder new baluns ===
22
23
Clean up the phone and solder HHM1526 and HHM1523C1 on the right places (the black dot goes up):
24
25
[[Image(motorola_filter_replacement_step_3_low.jpg, 250px)]]
26
[[Image(motorola_filter_replacement_step_4_low.jpg, 250px)]]
27
[[Image(motorola_filter_replacement_step_5_low.jpg, 250px)]]
28
29 3
=== Solder ceramic capacitors ===
30 2
31 4
Last step is to solder ceramic capacitors 04025A150JAT2A and 04025A220JAT2A:
32 2
33
[[Image(motorola_filter_replacement_step_6_low.jpg, 250px)]]
34
[[Image(motorola_filter_replacement_step_7_low.jpg, 250px)]]
35
36
=== Credits ===
37
38 1
Thanks to Sylvain and Peter who made this possible.
Add picture from clipboard (Maximum size: 48.8 MB)