Project

General

Profile

Filter Replacement » History » Version 3

Version 2 (luka12345, 02/19/2016 10:48 PM) → Version 3/12 (luka12345, 02/19/2016 10:48 PM)

== Motorola filter replacement ==

To replace filters on Motorola phones you will need:

* [http://search.digikey.com/scripts/DkSearch/dksus.dll?vendor=0&keywords=HHM1526 HHM1526]
* [http://search.digikey.com/scripts/DkSearch/dksus.dll?vendor=0&keywords=HHM1523C1 HHM1523C1]
* [http://search.digikey.com/scripts/DkSearch/dksus.dll?vendor=0&keywords=04025A150JAT2A 04025A150JAT2A]
* [http://search.digikey.com/scripts/DkSearch/dksus.dll?vendor=0&keywords=04025A220JAT2A 04025A220JAT2A]

=== Remove existing baluns ===

First you will need to remove existing balun:

[[Image(motorola_filter_replacement_step_1_low.jpg, 250px)]]
[[Image(motorola_filter_replacement_step_2_low.jpg, 250px)]]

=== Solder new baluns ===

Clean up the phone and solder HHM1526 and HHM1523C1 on the right places (the black dot goes up):

[[Image(motorola_filter_replacement_step_3_low.jpg, 250px)]]
[[Image(motorola_filter_replacement_step_4_low.jpg, 250px)]]
[[Image(motorola_filter_replacement_step_5_low.jpg, 250px)]]

=== Solder ceramic capacitors capacitor ===

Last step is to solder ceramic capacitors: capacitor:

[[Image(motorola_filter_replacement_step_6_low.jpg, 250px)]]
[[Image(motorola_filter_replacement_step_7_low.jpg, 250px)]]

=== Credits ===

Thanks to Sylvain and Peter who made this possible.
Add picture from clipboard (Maximum size: 48.8 MB)