Filter Replacement » History » Version 11

Version 10 (nion, 02/19/2016 10:48 PM) → Version 11/12 (zecke2, 02/19/2016 10:48 PM)

== Motorola filter replacement ==

In order to use the phone as a passive uplink sniffer, you will have to remove and replace the RX filters.

To replace filters on Motorola phones you will need:

* [ HHM1526]
* [ HHM1523C1]
* [ 04025A150JAT2A]
* [ 04025A220JAT2A]

As the shipping cost for such a small-quantity order is relatively high, a complete component kit is
available for online order from

=== Remove existing baluns ===

First you will need to remove existing balun:

[[Image(motorola_filter_replacement_step_1_low.jpg, 250px)]]
[[Image(motorola_filter_replacement_step_2_low.jpg, 250px)]]

=== Solder new baluns ===

Clean up the phone and solder HHM1526 and HHM1523C1 on the right places (the black dot goes up):

[[Image(motorola_filter_replacement_step_3_low.jpg, 250px)]]
[[Image(motorola_filter_replacement_step_4_low.jpg, 250px)]]
[[Image(motorola_filter_replacement_step_5_low.jpg, 250px)]]

=== Solder ceramic capacitors ===

Last step is to solder ceramic capacitors 04025A150JAT2A and 04025A220JAT2A:

[[Image(motorola_filter_replacement_step_6_low.jpg, 250px)]]
[[Image(motorola_filter_replacement_step_7_low.jpg, 250px)]]

=== Credits ===

Thanks to [ Sylvain] and Peter who made this possible.
Add picture from clipboard (Maximum size: 48.8 MB)