https://projects.osmocom.org/https://projects.osmocom.org/favicon.ico?16647414092022-01-29T21:19:54ZOpen Source Mobile CommunicationsE1/T1 Hardware Interface (including icE1usb) - Bug #5426: DAHDI not detecting icE1usbhttps://projects.osmocom.org/issues/5426?journal_id=235322022-01-29T21:19:54Zlaforge
<ul></ul><p>Looks all good and should be working.</p>
<p>The error message to the modprobe is clearly the key. Can you check lsmod before and after? And see if diese has any more details at the time you try loading the module?</p>
<p>On January 29, 2022 10:28:59 AM GMT+01:00, nickvsnetworking <<a class="email" href="mailto:redmine@osmocom.org">redmine@osmocom.org</a>> wrote:</p>
<blockquote>
<p>Issue <a class="issue tracker-1 status-6 priority-2 priority-default closed" title="Bug: DAHDI not detecting icE1usb (Rejected)" href="https://projects.osmocom.org/issues/5426">#5426</a> has been reported by nickvsnetworking.</p>
</blockquote> E1/T1 Hardware Interface (including icE1usb) - Bug #5426: DAHDI not detecting icE1usbhttps://projects.osmocom.org/issues/5426?journal_id=235332022-01-30T09:46:50Znickvsnetworking
<ul></ul><p>Thanks Harald,</p>
<p>After banging my head on the table for a few more hours, I blew everything away again and started with the device unplugged, and I think that made the difference. After that modprobe worked without a hitch, and I can see the device now. I ran the build steps again just to make sure and no issues.</p>
<p>I've updated the Manual with build instructions for anyone else trying this in the future, apologies if I missed a step there (First contrib to Gerrit).</p>
<p>Thanks for your help!<br />Nick</p> E1/T1 Hardware Interface (including icE1usb) - Bug #5426: DAHDI not detecting icE1usbhttps://projects.osmocom.org/issues/5426?journal_id=235402022-01-30T11:21:50Zlaforge
<ul><li><strong>Status</strong> changed from <i>New</i> to <i>In Progress</i></li></ul><p>nickvsnetworking wrote in <a href="#note-2">#note-2</a>:</p>
<blockquote>
<p>After banging my head on the table for a few more hours, I blew everything away again and started with the device unplugged, and I think that made the difference. After that modprobe worked without a hitch, and I can see the device now. I ran the build steps again just to make sure and no issues.</p>
</blockquote>
<p>strange. I will try to reproduce if that shows any problems.</p>
<p>In one of my setups I have the device plugged in permanently and [remotely] rebooted several times. This is also a situation where the device is plugged clearly before the driver is loaded.</p>
<blockquote>
<p>I've updated the Manual with build instructions for anyone else trying this in the future, apologies if I missed a step there (First contrib to Gerrit).</p>
</blockquote>
<p>Thanks, I added some comments there. Adding libnewt-dev is important IMHO, the other is optional.</p> E1/T1 Hardware Interface (including icE1usb) - Bug #5426: DAHDI not detecting icE1usbhttps://projects.osmocom.org/issues/5426?journal_id=235502022-01-31T09:38:39Zlaforge
<ul><li><strong>Status</strong> changed from <i>In Progress</i> to <i>Rejected</i></li></ul><p>I cannot reproduce this. Tried multiple times in both orders (modprobe -> usb-plug-in) and the other vay around.</p>
<p>Marking as rejected, please re-open as soon as you see the problem again.</p>