Actions
Bug #2648
closedosmo-mgw expects connection-ID from call agent in CRCX ?
Start date:
11/17/2017
Due date:
% Done:
100%
Spec Reference:
Description
I was re-running the MGCP test cases from osmo-ttcn3-hacks and all of them failed.
The odd part is: osmo-mgw appears to be requiring the call agent to include a connection-id.
Connection IDs are allocated by the mgw in response to a CRCX.
See RFC3435 2.1.3.2:
2.1.3.2 Names of Connections Connection identifiers are created by the gateway when it is requested to create a connection. They identify the connection within the context of an endpoint. Connection identifiers are treated in MGCP as hexadecimal strings. The gateway MUST make sure that a proper waiting period, at least 3 minutes, elapses between the end of a connection that used this identifier and its use in a new connection for the same endpoint (gateways MAY decide to use identifiers that are unique within the context of the gateway). The maximum length of a connection identifier is 32 characters.
Updated by laforge over 6 years ago
See https://gerrit.osmocom.org/4905 as a starting point. This semantic change of course requires corresponding changes on the BSC side
Updated by dexter over 6 years ago
- % Done changed from 0 to 100
The the method of assigning the connection ID is now changed. Also on the BSC side:
https://gerrit.osmocom.org/4963 bssap: remove libosmo-legacy-mgcp dependancy
https://gerrit.osmocom.org/4964 mgcp: use mgw assigned connection identifiers
Actions