SIMtrace Firmware » History » Version 2
Anonymous, 02/19/2016 10:48 PM
Mention the sourcecode
| 1 | 1 | laforge | = SIMtrace Firmware = |
|---|---|---|---|
| 2 | |||
| 3 | This page will contain all firmware versions as they are released by the Osmocom developers |
||
| 4 | |||
| 5 | == DFU Image == |
||
| 6 | |||
| 7 | DFU images only contain the actual SIMtrace application firmware, but not the bootloader (sam7dfu). |
||
| 8 | |||
| 9 | They can be installed using '''dfu-util'''. Their installation does not require any jumper-setting or |
||
| 10 | cable plugging/unplugging. |
||
| 11 | |||
| 12 | * Firmware v0.2: |
||
| 13 | == SAM-BA Image == |
||
| 14 | |||
| 15 | SAM-BA images contain a full NOR flash image. They can be used in case the sam7dfu bootloader was corrupted, |
||
| 16 | and can be installed either using the '''sam7''' program released by Atmel, or via JTAG based flashing. |
||
| 17 | |||
| 18 | Installing firmware using SAM-BA is a bit cumbersome and requires strict adherence to a sequence of USB cable plugging/unplugging and jumper setting, waiting, jumper removal, etc. |
||
| 19 | 2 | laforge | |
| 20 | == Source == |
||
| 21 | |||
| 22 | The sourcecode can be found in the [http://git.gnumonks.org/cgi-bin/gitweb.cgi?p=openpcd.git;a=tag;h=3aa065ac48f21ce7c4d0879686fb07b04a60771f v0.2] tag of the git tree of the gnumonks.org git repository. |
