Project

General

Profile

SIMtrace » History » Version 53

gnutoo, 03/09/2018 04:06 PM
Improve TODO list presentation

1 41 tsaitgaist
{{>toc}}
2 1 laforge
3 41 tsaitgaist
h1. Osmocom SIMtrace
4 41 tsaitgaist
5 41 tsaitgaist
6 1 laforge
Osmocom SIMtrace is a software and hardware system for passively tracing SIM-ME communication between the SIM card and the mobile phone.
7 1 laforge
8 18 laforge
It looks a bit like this:
9 42 laforge
{{graphviz_link()
10 18 laforge
digraph G{
11 18 laforge
  //rankdir = LR;
12 18 laforge
  Phone -> SIMtrace [label = "Flexi-PCB cable"];
13 1 laforge
  SIMtrace -> SIM;
14 18 laforge
  SIMtrace -> PC [label = "USB cable"];
15 1 laforge
16 1 laforge
  SIMtrace [ label = "SIMtrace hardware" ];
17 18 laforge
}
18 42 laforge
}}
19 18 laforge
20 29 laforge
When connected to a phone, it looks like this:
21 29 laforge
22 1 laforge
23 43 laforge
!{width:50%}simtrace_and_phone.jpg!
24 43 laforge
25 43 laforge
!{width:33%}simtrace_functions.png!
26 1 laforge
27 1 laforge
It works by utilizing the T=0 capable USART of the USB-attached AT91SAM7 microcontroller.
28 1 laforge
29 46 zecke
The USART passively receives the bytes as they are exchanged on the ISO 7816-3 / TS 11.11 interface between SIM and phone. The received bytes are sent via USB to the PC, where a program called simtrace on the PC gathers data from the USB device, parses the APDUs and forwards them via GSMTAP to the wireshark protocol analyzer.
30 38 tsaitgaist
31 1 laforge
32 41 tsaitgaist
h2. Features
33 1 laforge
34 1 laforge
35 41 tsaitgaist
* Completely passive scanner
36 41 tsaitgaist
* RST and ATR detection
37 41 tsaitgaist
* Auto-bauding with PPS / PTS support
38 41 tsaitgaist
* Segmentation of APDUs
39 41 tsaitgaist
40 41 tsaitgaist
41 38 tsaitgaist
SIMtrace can be used to monitor the ME-SIM communication, but also emulate a phone or SIM, or be MitM.
42 38 tsaitgaist
While the hardware supports all these modes, only the monitoring aspect has been implemented in software.
43 1 laforge
44 41 tsaitgaist
h2. TODO
45 1 laforge
46 53 gnutoo
SIMtrace is a community project, and help is more than welcome.
47 1 laforge
48 53 gnutoo
Here's some of the things that could be improved:
49 41 tsaitgaist
* Check for parity errors
50 41 tsaitgaist
* Verify TCK / PCK check-bytes
51 41 tsaitgaist
* Implement MITM
52 1 laforge
53 41 tsaitgaist
h2. Hardware
54 41 tsaitgaist
55 41 tsaitgaist
The first implementations used an Olimex SAM7-P64 development board with some of the I/O lines hooked up to the mechanical SIM card adapters from [[RebelSIM_Scanner]]. If the [[RebelSIM]] scanner is used, connect the USB even if just the lines are used. It needs to be powered, else the real reader will often fail to initialize the card.
56 41 tsaitgaist
57 31 laforge
Now we have a dedicated PCB design.  The schematics and Gerber files are released as open source hardware and can be produced by everyone.
58 1 laforge
59 1 laforge
However, those of you who are not interested in building it from scratch can buy a complete factory-produced, tested and flashed PCB assembly from http://shop.sysmocom.de/products/simtrace
60 51 gnutoo
61 52 gnutoo
It could also be interfaced with full size SIM card "with a separate adapter":http://shop.sysmocom.de/products/fullsize-sim-fpc
62 1 laforge
63 47 laforge
More details are available at [[SIMtrace_Hardware]]
64 1 laforge
65 41 tsaitgaist
h2. Firmware
66 1 laforge
67 1 laforge
68 41 tsaitgaist
The firmware for the AT91SAM7S device was written by reusing a lot of the code for the "OpenPCD":http://www.openpcd.org/
69 48 laforge
RFID reader.  Details are available at [[SIMtrace Firmware]].
70 41 tsaitgaist
71 41 tsaitgaist
h2. Documentation
72 41 tsaitgaist
73 41 tsaitgaist
74 1 laforge
Please check the attachments for a usermanual. In there you will find some hints to install ready made packages for
75 1 laforge
your favorite Linux Distribution.
76 39 zecke2
77 1 laforge
78 1 laforge
h2. Host PC Software
79 41 tsaitgaist
80 41 tsaitgaist
81 46 zecke
The simtrace program is part of the ​git://git.osmocom.org/simtrace.git repository. It will bind to the USB device and send GSMTAP frames using UDP/IPv4 to localhost:4729.
82 5 laforge
83 41 tsaitgaist
h3. Preconditions
84 14 tsaitgaist
85 1 laforge
86 49 laforge
[[libosmocore:]] and headers (simtrace_usb.h) from the firmware.
87 41 tsaitgaist
88 1 laforge
additional packages :
89 41 tsaitgaist
<pre>
90 14 tsaitgaist
sudo apt-get install libusb-1.0-0-dev
91 1 laforge
</code></pre>
92 7 tsaitgaist
93 41 tsaitgaist
h3. Compiling it
94 41 tsaitgaist
95 41 tsaitgaist
96 41 tsaitgaist
<pre>
97 35 tsaitgaist
git clone git://git.osmocom.org/simtrace.git
98 35 tsaitgaist
cd simtrace/host/
99 35 tsaitgaist
make
100 41 tsaitgaist
</code></pre>
101 35 tsaitgaist
102 35 tsaitgaist
103 41 tsaitgaist
h3. Accessing it
104 41 tsaitgaist
105 41 tsaitgaist
106 35 tsaitgaist
Add udev rules so to be able to use simtrace and access the device as non-root user (only need to be in the osmocom group)
107 35 tsaitgaist
108 41 tsaitgaist
<pre>
109 6 tsaitgaist
sudo groupadd osmocom
110 6 tsaitgaist
sudo adduser $USERNAME osmocom
111 1 laforge
sudo tee /etc/udev/rules.d/10-osmocom.rules << EOF
112 1 laforge
# to use, install this file in /etc/udev/rules.d as 10-osmocom.rules
113 6 tsaitgaist
# rule to grant read/write access on SIMtrace to group named osmocom.
114 1 laforge
SUBSYSTEM=="usb", ATTR{idProduct}=="0762", ATTRS{idVendor}=="16c0", MODE="0660", GROUP="osmocom"
115 1 laforge
EOF
116 1 laforge
sudo service udev reload
117 41 tsaitgaist
</code></pre>
118 1 laforge
119 1 laforge
you must log out and back in so to take effect.
120 13 tsaitgaist
121 1 laforge
122 41 tsaitgaist
h3. Using it
123 41 tsaitgaist
124 41 tsaitgaist
125 41 tsaitgaist
Simply start *simtrace*.
126 1 laforge
It will send the GSMTAP frames to UDP/IPv4 localhost:4729.
127 1 laforge
128 1 laforge
It will also print hexdumps of the frames to the console, looking like this:
129 41 tsaitgaist
<pre>
130 1 laforge
sudo ./simtrace
131 1 laforge
APDU: (9):  a0 a4 00 00 02 6f 07 9f 0f
132 1 laforge
APDU: (22):  a0 c0 00 00 0f 00 00 00 09 6f 07 04 00 15 00 15 01 02 00 00 91 78
133 1 laforge
APDU: (9):  a0 a4 00 00 02 6f 38 9f 0f
134 1 laforge
APDU: (22):  a0 c0 00 00 0f 00 00 00 09 6f 38 04 00 15 00 55 01 02 00 00 91 78
135 1 laforge
APDU: (16):  a0 b0 00 00 09 ff 3f ff ff 00 00 3f 03 00 91 78
136 1 laforge
APDU: (9):  a0 a4 00 00 02 6f ad 9f 0f
137 1 laforge
APDU: (8):  a0 b0 00 00 01 00 91 78
138 1 laforge
APDU: (9):  a0 a4 00 00 02 6f 07 9f 0f
139 1 laforge
APDU: (16):  a0 b0 00 00 09 08 49 06 20 11 49 00 11 06 91 78
140 1 laforge
APDU: (9):  a0 a4 00 00 02 6f 7e 9f 0f
141 1 laforge
APDU: (18):  a0 b0 00 00 0b ff ff ff ff 64 f0 00 ff fe 00 03 91 78
142 1 laforge
APDU: (9):  a0 a4 00 00 02 6f 78 9f 0f
143 2 laforge
APDU: (9):  a0 b0 00 00 02 00 01 91 78
144 2 laforge
APDU: (9):  a0 a4 00 00 02 6f 74 9f 0f
145 2 laforge
APDU: (23):  a0 b0 00 00 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 91 78
146 2 laforge
APDU: (9):  a0 a4 00 00 02 6f 20 9f 0f
147 1 laforge
APDU: (16):  a0 b0 00 00 09 ff ff ff ff ff ff ff ff 07 91 78
148 1 laforge
APDU: (9):  a0 a4 00 00 02 6f 30 9f 0f
149 1 laforge
APDU: (22):  a0 c0 00 00 0f 00 00 00 f0 6f 30 04 00 11 00 55 01 02 00 00 91 78
150 41 tsaitgaist
</code></pre>
151 1 laforge
152 41 tsaitgaist
h2. Wireshark integration
153 34 tsaitgaist
154 41 tsaitgaist
155 41 tsaitgaist
There is an experimental patch, also part of the simtrace.git package.  It is also included in the [[wireshark]] developer version (since wireshark 1.7.1).
156 41 tsaitgaist
157 34 tsaitgaist
To see the APDUs in wireshark:
158 41 tsaitgaist
* on localhost SIMtrace automatically opens a UDP sink locally, no need to do any anything
159 41 tsaitgaist
* to get the data on another machine
160 41 tsaitgaist
** start an UDP sink for GSMTAP on the other machine (do not use netcat as it "connects" back)
161 41 tsaitgaist
<pre>
162 37 tsaitgaist
socat -u udp-recv:4729 /dev/null
163 41 tsaitgaist
</code></pre>
164 41 tsaitgaist
** tell SIMtrace on which machine to forward
165 41 tsaitgaist
<pre>
166 1 laforge
./simtrace -i 192.168.0.1
167 41 tsaitgaist
</code></pre>
168 1 laforge
169 44 laforge
!wireshark-sim.png!
170 31 laforge
171 31 laforge
Protocol parsing is far from being complete, patches are always welcome!
172 31 laforge
173 50 gnutoo
h2. Other software
174 50 gnutoo
175 50 gnutoo
* "simlabTrace":https://github.com/kamwar/simlabTrace/wiki seem to be capable of MITM and also seem to have a CCID driver to use SIMtrace as a card reader.
176 50 gnutoo
177 41 tsaitgaist
h2. Contact / Mailing List
178 41 tsaitgaist
179 41 tsaitgaist
180 1 laforge
For any development or usage related questions, there is a mailinglist [mailto:simtrace@lists.osmocom.org], you can subscribe/unsubscribe to it at http://lists.osmocom.org/mailman/listinfo/simtrace and read the archives at http://lists.osmocom.org/pipermail/simtrace/
181 1 laforge
182 45 laforge
Please make sure you read the [[cellular-infrastructure:MailingListRules]] before you start posting.
Add picture from clipboard (Maximum size: 48.8 MB)