ELSA MicroLink ISDN 2ab » History » Revision 5
Revision 4 (laforge, 11/29/2022 04:37 PM) → Revision 5/9 (laforge, 11/29/2022 04:38 PM)
h1. ELSA MicroLink ISDN 2a/b This is an ISDN terminal adapter with built-in a/b-Adapter for atraching analog devices (phones/modem) to an ISDN S0-bus. {{thumbnail(ELSA_MicroLink_ISDN_2ab_front.jpg)}} {{thumbnail(ELSA_MicroLink_ISDN_2ab_back.jpg)}} {{thumbnail(ELSA_MicroLink_ISDN_2ab_bottom.jpg)}} It appears to also have been sold as "ELSA Tango 2000", at least it shares the same firmware update files. |Supply Voltage|24V AC| |Power Consumption|?| |RS232 Connector|mini-DIN (adapter to DB9 + DB25 included)| |Line Connector|RJ-11 (unusual for ISDN)| h2. MicroLink mini-DIN pin-out See [[Devolo_MicroLink_56k_Fun_II#MicroLink-mini-din-pin-out]] for the pin-out. h2. AT commands h3. Setting the MSN <pre> AT$IMSN=0,“MSN1“,“MSN2“,“MSN3“ </pre> h3. Setting the bearer protocol <pre> Syntax: AT$IBP=<wert1> Parameter Wert Bedeutung wert1 X75 X.75 Protokoll X75T70 T70NL- Protokoll V120 V.120 Protokoll V110 V.110 Protokoll HDLC HDLC - Protokoll TRANS Transparent HDLCP HDLC - PPP - Protokoll BTX X.75, T.70NL und Cept/Kit X75FB1 X.75 -> HDLCP X75FB2 X.75 -> V.120 -> HDLCP X75FB3 X.75 -> V.120 V120FB1 V.120 -> HDLCP </pre> h2. Documentation * English User Manual: attachment:20651E.pdf * English Installation Guide: attachment:20653.PDF h2. Firmware * 2.16: attachment:FW2AB.ZIP