Ettus USRP Family » History » Revision 3
Revision 2 (laforge, 06/13/2017 05:43 PM) → Revision 3/9 (laforge, 06/13/2017 06:05 PM)
h1. Ettus USRP Family hardware
You can run OsmoTRX using the Ettus USRP family of devices.
All Ettus Research devices are supported.
||*Ettus Research*||*Notes*||
||USRP1||Requires legacy libusrp driver and clocking modification||
||USRP2||10 MHz external reference required||
||B100||
||B110||
||B200||GPSDO or 10 MHz external reference recommended||
||B210||Dual channel, 10 MHz external reference recommended||
||N200||
||N210||
||E100||
||E110||
FIXME: More USRP specific information here
h2. Ettus USRP B2x0
Ettus B2x0 output signal levels
|_.band |_.arfcn |_.tx-attenuation |_.signal level (dBm) |
| 850 | 128 | 0 | 13.2 |
| 850 | 189 | 0 | 13.2 |
| 850 | 251 | 0 | 13.2 |
| 900 | 0 | 0 | 13.1 |
| 900 | 86 | 0 | 13.1 |
| 900 |1023 | 0 | 13.1 |
| 1800 | 512 | 0 | 6.9 |
| 1800 | 698 | 0 | 6.9 |
| 1800 | 870 | 50 | -42.0 |
| 1800 | 870 | 25 | -16.7 |
| 1800 | 870 | 10 | -2.1 |
| 1800 | 870 | 0 | 7.1 |
| 1800 | 885 | 0 | 6.9 |
| 1900 | 512 | 0 | 7.2 |
| 1900 | 661 | 0 | 7.3 |
| 1900 | 810 | 0 | 7.4 |
these values were measured by sysmocom on a agilent E4406 with an ettus B210
