Ettus USRP Family » History » Revision 2
Revision 1 (roh, 06/06/2017 09:58 AM) → Revision 2/9 (laforge, 06/13/2017 05:43 PM)
h1. Ettus USRP Family hardware You can run OsmoTRX using the Ettus USRP family of devices. FIXME: More USRP specific information here h2. Ettus USRP B2x0 Ettus B2x0 output signal levels |_.band |_.arfcn |_.tx-attenuation |_.signal level (dBm) | | 850 | 128 | 0 | 13.2 | | 850 | 189 | 0 | 13.2 | | 850 | 251 | 0 | 13.2 | | 900 | 0 | 0 | 13.1 | | 900 | 86 | 0 | 13.1 | | 900 |1023 | 0 | 13.1 | | 1800 | 512 | 0 | 6.9 | | 1800 | 698 | 0 | 6.9 | | 1800 | 870 | 50 | -42.0 | | 1800 | 870 | 25 | -16.7 | | 1800 | 870 | 10 | -2.1 | | 1800 | 870 | 0 | 7.1 | | 1800 | 885 | 0 | 6.9 | | 1900 | 512 | 0 | 7.2 | | 1900 | 661 | 0 | 7.3 | | 1900 | 810 | 0 | 7.4 | these values were measured by sysmocom on a agilent E4406 with an ettus B210