Project

General

Profile

OsmoSDR » History » Version 19

laforge, 02/28/2016 06:47 PM

1 16
{{>toc}}
2 1
3 16
h1. Welcome to [[OsmoSDR]]
4
5
6
[[OsmoSDR]] is a 100% Free Software based small form-factor inexpensive
7 1
SDR (Software Defined Radio) project.
8 2 laforge
9 16
If you are familiar with existing SDR receivers, then [[OsmoSDR]] can be thought
10
of something in between a "FunCube Dongle":http://tetra.osmocom.org/trac/wiki/Funcube_Dongle (only 96kHz bandwidth) and a USRP (much more expensive).
11
For a very cheap SDR (with limited dynamic range), you can use the DVB-T USB stick using the RTL2832U chip, as documented in [[rtl-sdr]].
12 2 laforge
13 16
It consists of a USB-attached [[Hardware]], associated [[Firmware]]
14 19 laforge
as well as [[sdr:GrOsmoSDR]] gnuradio integration on the PC.
15 1
16 13 laforge
The first generation hardware (1.2 MS/s) was available to interested developers from http://shop.sysmocom.de/
17 1
18 3 laforge
We are currently doing a re-design for the second-generation hardware, featuring higher sample rate and other goodies.
19 4 laforge
20 18 laforge
Hardware schematics and firmware source code are kept in a git repository on git.osmocom.org.
21 19 laforge
* clone the repository like this: @git clone git://git.osmocom.org/osmo-sdr.git@
22 4 laforge
23 1
24 6 laforge
h2. Picture
25 16
26 12 Hoernchen
This is a (slightly better) picture of the current developer preview:
27 1
28 17 laforge
!osmosdr-beta.jpg!
29 13 laforge
30
31 16
h2. Mailing List
32 13 laforge
33
34 16
We discuss both [[OsmoSDR]] as well as rtl-sdr on the following mailing list: [mailto:osmocom-sdr@lists.osmocom.org].
35
You can subscribe and/or unsubscribe via the following link: "h2. Credits
36
37
38
* Stefan Reimann of [http://sr-systems.de/ SR-Systems":http://lists.osmocom.org/mailman/listinfo/osmocom-sdr] (electrical engineering, manufacturing)
39
* "Christian Daniel":http://www.cdaniel.de/, Matthias Kleffel and Thomas Kleffel of "maintech":http://maintech.de/ (overall design, FPGA, rum-ba)
40
* "Harald Welte":http://laforge.gnumonks.org/ of "sysmocom":http://sysmocom.de/ (sam3u firmware development)
Add picture from clipboard (Maximum size: 48.8 MB)