OsmoSDR » History » Revision 16
« Previous |
Revision 16/26
(diff)
| Next »
Anonymous, 02/19/2016 10:51 PM
- Table of contents
- Welcome to OsmoSDR
Welcome to OsmoSDR¶
OsmoSDR is a 100% Free Software based small form-factor inexpensive
SDR (Software Defined Radio) project.
If you are familiar with existing SDR receivers, then OsmoSDR can be thought
of something in between a FunCube Dongle (only 96kHz bandwidth) and a USRP (much more expensive).
For a very cheap SDR (with limited dynamic range), you can use the DVB-T USB stick using the RTL2832U chip, as documented in rtl-sdr.
It consists of a USB-attached Hardware, associated Firmware
as well as GrOsmoSDR gnuradio integration on the PC.
The first generation hardware (1.2 MS/s) was available to interested developers from http://shop.sysmocom.de/
We are currently doing a re-design for the second-generation hardware, featuring higher sample rate and other goodies.
BlogList(format=float,recent=5,max_size=350)
Hardware schematics and firmware source code are kept in a git repository on git.osmocom.org.
* web-browse the repository: "For a complete list of local wiki pages, see [[TitleIndex]]. h2. Picture This is a (slightly better) picture of the current developer preview: [[Image(osmosdr-beta.jpg,50%)":http://cgit.osmocom.org/cgit/osmo-sdr/]] h2. Mailing List We discuss both [[OsmoSDR]] as well as rtl-sdr on the following mailing list: [mailto:osmocom-sdr@lists.osmocom.org]. You can subscribe and/or unsubscribe via the following link: "h2. Credits * Stefan Reimann of [http://sr-systems.de/ SR-Systems":http://lists.osmocom.org/mailman/listinfo/osmocom-sdr] (electrical engineering, manufacturing) * "Christian Daniel":http://www.cdaniel.de/, Matthias Kleffel and Thomas Kleffel of "maintech":http://maintech.de/ (overall design, FPGA, rum-ba) * "Harald Welte":http://laforge.gnumonks.org/ of "sysmocom":http://sysmocom.de/ (sam3u firmware development)
Updated by about 8 years ago · 16 revisions