Project

General

Profile

Actions

Wiki » History » Revision 4

« Previous | Revision 4/30 (diff) | Next »
ptrkrysik, 09/04/2018 12:47 PM
NLnet logo


Welcome to SDR PHY for OsmocomBB project

Introduction

OsmocomBB project provides almost free software GSM mobile station implementation, from Layer 1 to Layer 3. The last non-free parts are: layer 1 and low level signal processing that are implemented in a non-free DSP software that is inside of the harware platform that OsmocomBB is based on currently (mostly reverse engineered Calypso based mobile phones).

The SDR PHY for OsmocomBB aims to replace these non-free parts through use Software Defined Radio devices and by creating missing software part for tasks such as voice encoding/decoding, channel encoding/decoding, burst modulation/demodulation and controlling SDR hardware. In order to achieve this goal the SDR PHY for OsmocomBB brings together OsmocomBB and gr-gsm projects, where the role of gr-gsm is to provide GSM bursts transmission and reception with everything starting from channel coding/decoding being done in OsmocomBB.

Having support for general purpose SDR hardware has additional advantage of not being locked to a single and already obsolete harware platform. Adding support for new well documented SDR platforms is significantly easier than reverse-engineering mobile phones hardware and software. This could sustain OsmocomBB project's life even in the absence of hacked mobile phones it is able to run on.

Project status

Known limitations (not implemented):

  • Automatic PHY delay measurement
  • AGC (Automatic Gain Control)
  • Power measurement

Work in progress:

  • Docker scripts (Dockerfiles)
  • GAPK based audio back-end
  • TCH/H implementation
  • Frequency Hopping

Future plans:

  • Extend supported hardware list (Soapy?)
  • PC/SC physical SIM interface
  • AMR (Adaptive Multi-Rate)

Sponsors

The project has support of NLnet Foundation

fsdafs.

Files (1)
nlnet_logo_320x120.png View nlnet_logo_320x120.png 12.5 KB Logo of NLnet ptrkrysik, 09/04/2018 12:41 PM

Updated by ptrkrysik over 5 years ago · 4 revisions

Add picture from clipboard (Maximum size: 48.8 MB)