Ethernet dummyload » History » Revision 3
Revision 2 (dexter, 02/19/2016 10:48 PM) → Revision 3/7 (dexter, 02/19/2016 10:48 PM)
== The ethernet dummload == To lower the risk of interfering with a commercial network operator you should operate your BS11 with a dummyload. We discovered that an old ethernet terminator can do the job. It is just a 50Ohms resistor - exactly what we need. consists of an 50Ohm resistor. [[Image(ethernetDummyload_parts.JPG, width=300px)]] To connect the terminator to the BS11 you need an N-Connector to BNC adaptor. Just put them together and you have a nice dummload for your BTS. [[Image(ethernetDummyload_puttogether.JPG, width=300px)]] [[Image(ethernetDummyload_inuse.JPG, width=300px)]]
