Revision 1 (dexter, 02/19/2016 10:48 PM) → Revision 2/7 (dexter, 02/19/2016 10:48 PM)
== The ethernet dummload ==
To lower the risk of interfering with a commercial network operator you should operate your BS11 with a dummyload. We discovered that an old ethernet terminator can do the job. It consists of an 50Ohm resistor.
[[Image(ethernetDummyload_parts.JPG, width=300px)]]
IMPORTANT NOTICE: This page contains information about a legacy version of the Osmocom software. This legacy version is no longer maintained. If you use it, don't be surprised if it doesn't work. It was your choice to ignore man-years worth of developments, improvements and fixes. Please migrate to the active/supported software (Osmocom CNI, consisting of OsmoBSC, OsmoMSC, OsmoHLR, OsmoSTP, OsmoMGW - a NITB style setup is described at Osmocom_Network_In_The_Box).
