Project

General

Profile

BS11LMT » History » Revision 3

Revision 2 (Anonymous, 02/19/2016 10:47 PM) → Revision 3/8 (Anonymous, 02/19/2016 10:47 PM)

 
 == How to use LMT == 

  * connect serial port of PC with J2 on BS11 using the cable that came with the BS11 
  * start LMT program 

 === LMT rs232 connector pinout === 

 If you look at the BS-11 interface (Antenne connectors top), its the upper 8-pin connector: 

 {{{ 
   The four E1 BNC connectors are above here. 

      (Rx) x x x x (right pin: Gnd) 
      (Tx) x x x x (right pin: +5V) 
             | 
             + LMT 
 }}} 

 see also [http://bs11-abis.gnumonks.org/trac/attachment/wiki/BS11_Configuration/bs11_power_lmt_cabling.jpg bs11_power_lmt_cabling.jpg] 

 '''J2:''' 

 [[Image(img_6412-1.jpg, 15%)]] 

 {{{ 
   1(GND) 
   | 
   |     2(TX) 
   |     | 
   X 0 X 0 
   0 0 X 0 
       | 
       3(RX) 
 }}} 


 '''RS232:''' 

 [[Image(img_6414-1.jpg, 15%)]] 

 {{{ 
   1(GND) 
   | 
   |     2(TX) 
   |     | 
   |     | 3(RX) 
   |     | | 
   X 0 X X 0 
    0 0 0 0 
 }}} 
 == Known Versions (and issues?) == 

 === LMT v4.17 === 

 === LMT v4.21 === 
Add picture from clipboard (Maximum size: 48.8 MB)