BS11LMT » History » Version 2
Anonymous, 02/19/2016 10:47 PM
add LMT connector pinout
| 1 | 1 | laforge | |
|---|---|---|---|
| 2 | == How to use LMT == |
||
| 3 | |||
| 4 | * connect serial port of PC with J2 on BS11 using the cable that came with the BS11 |
||
| 5 | * start LMT program |
||
| 6 | |||
| 7 | 2 | laforge | === LMT rs232 connector pinout === |
| 8 | |||
| 9 | If you look at the BS-11 interface (Antenne connectors top), its the upper 8-pin connector: |
||
| 10 | |||
| 11 | {{{ |
||
| 12 | The four E1 BNC connectors are above here. |
||
| 13 | |||
| 14 | (Rx) x x x x (right pin: Gnd) |
||
| 15 | (Tx) x x x x (right pin: +5V) |
||
| 16 | | |
||
| 17 | + LMT |
||
| 18 | }}} |
||
| 19 | |||
| 20 | see also [http://bs11-abis.gnumonks.org/trac/attachment/wiki/BS11_Configuration/bs11_power_lmt_cabling.jpg bs11_power_lmt_cabling.jpg] |
||
| 21 | |||
| 22 | 1 | laforge | == Known Versions (and issues?) == |
| 23 | |||
| 24 | === LMT v4.17 === |
||
| 25 | |||
| 26 | === LMT v4.21 === |
