Project

General

Profile

Actions

Code-audit » History » Revision 35

« Previous | Revision 35/57 (diff) | Next »
Anonymous, 02/19/2016 10:49 PM


Introduction
This page is a code audit that: * Verify if the license are correct(not copied from osmocom-bb and changed from GPL to BSD) * permit to view the license of each file, that's important for the inclusion into the official nuttx that only accepts BSD code for the non-applications part.
Audit
Currently the following files were added or modified by nuttx-bb(on top of nuttx): {{{
apps/examples/calypsotest/Makefile
apps/examples/calypsotest/bounce_analyze.c
apps/examples/calypsotest/main.c
apps/examples/ostest/main.c
nuttx/arch/arm/include/calypso/armio.h OK,BSD only definitions of functions
nuttx/arch/arm/include/calypso/clock.h no license, copied from omsocombb's src/target/firmware/include/clock.h(which has no license too)
nuttx/arch/arm/include/calypso/debug.h no license, copied from omsocombb's src/target/firmware/include/debug.h(which has no license too), debug macros
nuttx/arch/arm/include/calypso/defines.h no license, copied from osmocombb's src/target/firmware/include/defines.h(which has no license too), trivial defines like #define unused attribute((unused))
nuttx/arch/arm/include/calypso/irq.h GPL, copyright Harald Welte and Stefan Richter
nuttx/arch/arm/include/calypso/memory.h no license,copied from osmocombb's src/target/firmware/include/memory.h(which has no license too), trivial defines like #define readb(a) _arch_getb(a)
nuttx/arch/arm/include/calypso/timer.h no license, copied from osmocombb's src/target/firmware/include/timer.h(which has no license too), only definitions of functions
nuttx/arch/arm/src/Makefile OK,BSD
nuttx/arch/arm/src/calypso/Make.defs OK,BSD
nuttx/arch/arm/src/calypso/calypso_armio.c BSD,copyright Stefan Richter, seem ok(grep found nothing in osmocom-bb)
nuttx/arch/arm/src/calypso/calypso_head.S no license, specific to nuttx( it jumps to functions like up
which are nuttx functions)
nuttx/arch/arm/src/calypso/calypso_heap.c problematic?, see below
nuttx/arch/arm/src/calypso/calypso_irq.c OK,GPL, copied from osmocombb's src/target/firmware/calypso/irq.c , copyright Harald Welte and Stefan Richter
nuttx/arch/arm/src/calypso/calypso_keypad.c OK,BSD, totally different from osmocom-bb's src/target/firmware/calypso/keypad.c
nuttx/arch/arm/src/calypso/calypso_lowputc.S OK,BSD, not found in osmocom-bb source
nuttx/arch/arm/src/calypso/calypso_serial.c OK,BSD, based on nuttx/arch/arm/src/c5471/c5471_serial.c from nuttx (verified with diff)
nuttx/arch/arm/src/calypso/calypso_spi.c OK,BSD, wrapper arround osmocombb's SPI, incomplete
nuttx/arch/arm/src/calypso/calypso_timer.c OK,GPL, copyright Harald Welte and Stefan Richter
nuttx/arch/arm/src/calypso/chip.h OK,BSD,based on nuttx/arch/arm/src/c5471/chip.h
nuttx/arch/arm/src/calypso/clock.c OK,GPL, copyright Harald Welte
nuttx/arch/arm/src/common/up_internal.h OK,BSD,trivial modification(part of nuttx)
nuttx/configs/compal_e88/calypsotest/Make.defs OK,BSD
nuttx/configs/compal_e88/calypsotest/appconfig OK,BSD
nuttx/configs/compal_e88/calypsotest/defconfig OK,BSD
nuttx/configs/compal_e88/calypsotest/setenv.sh OK,BSD
nuttx/configs/compal_e88/include/board.h OK,BSD
nuttx/configs/compal_e88/ld.script OK,BSD
nuttx/configs/compal_e88/nsh/Make.defs OK,BSD
nuttx/configs/compal_e88/nsh/appconfig OK,BSD
nuttx/configs/compal_e88/nsh/defconfig OK,BSD
nuttx/configs/compal_e88/nsh/ld.script OK,BSD
nuttx/configs/compal_e88/nsh/setenv.sh OK,BSD
nuttx/configs/compal_e88/ostest/Make.defs OK,BSD
nuttx/configs/compal_e88/ostest/appconfig OK,BSD
nuttx/configs/compal_e88/ostest/defconfig OK,BSD
nuttx/configs/compal_e88/ostest/setenv.sh OK,BSD
nuttx/configs/compal_e88/src/Make.dep OK,BSD
nuttx/configs/compal_e88/src/Makefile OK,BSD
nuttx/configs/compal_e88/src/dummy.c OK,BSD
nuttx/configs/compal_e99/calypsotest/Make.defs OK,BSD
nuttx/configs/compal_e99/calypsotest/appconfig OK,BSD
nuttx/configs/compal_e99/calypsotest/defconfig OK,BSD
nuttx/configs/compal_e99/calypsotest/setenv.sh OK,BSD
nuttx/configs/compal_e99/include/board.h OK,BSD
nuttx/configs/compal_e99/ld.script OK,BSD
nuttx/configs/compal_e99/nsh/Make.defs OK,BSD
nuttx/configs/compal_e99/nsh/appconfig OK,BSD
nuttx/configs/compal_e99/nsh/defconfig OK,BSD
nuttx/configs/compal_e99/nsh/ld.script OK,BSD
nuttx/configs/compal_e99/nsh/setenv.sh OK,BSD
nuttx/configs/compal_e99/ostest/Make.defs OK,BSD
nuttx/configs/compal_e99/ostest/appconfig OK,BSD
nuttx/configs/compal_e99/ostest/defconfig OK,BSD
nuttx/configs/compal_e99/ostest/setenv.sh OK,BSD
nuttx/configs/compal_e99/src/Makefile OK,BSD
nuttx/configs/compal_e99/src/dummy.c OK,BSD
nuttx/drivers/Makefile OK,BSD
nuttx/drivers/sercomm/Make.defs OK,BSD
nuttx/drivers/sercomm/console.c mostly OK, BSD
nuttx/drivers/sercomm/loadwriter.py no copyright at all, small enough
nuttx/drivers/sercomm/uart.c OK,GPL, copyright Harald Welte and Ingo Albrecht
nuttx/drivers/sercomm/uart.h no license, copied from osmocom-bb's src/target/firmware/include/uart.h which had no license too
nuttx/include/nuttx/spi.h OK,BSD, only small change made
nuttx/include/sercomm/msgb.h OK,GPL,copyright Harald Welte
nuttx/include/sercomm/sercomm.h copy of src/target/firmware/include/comm/sercomm.h, no license in both.
nuttx/include/sercomm/sercomm_cons.h no license,copied from osmocom-bb's src/target/firmware/include/comm/sercomm_cons.h which had no license, interface only(only 2 definitions of functions inside)
70 files changed, 9221 insertions(+), 3 deletions(-)
}}}

We can safely assume that the config dir weren't took from osmocom-bb.
init.c and console.c === nuttx-bb === * Copyright Stefan Richter * BSD License * nuttx/drivers/sercomm/console.c {{{
/* XXX: initialize MODEMUART to be used for sercomm*/
uart_init(SERCOMM_UART_NR, 1);
uart_baudrate(SERCOMM_UART_NR, UART_115200);
}}} === osmocom-bb === * GPL * Copyright Harald Welte and Steve Markgraf * src/target/firmware/board/compal_e99/init.c {{{
/* initialize MODEM UART to be used for sercomm*/
uart_init(SERCOMM_UART_NR, 1);
uart_baudrate(SERCOMM_UART_NR, UART_115200);
}}}

calypsotest/bounce_analyze.c === nuttx-bb === * Copyright Stefan Richter * GPL License (could keep as GPL since it is an application) * apps/examples/calypsotest/bounce_analyze.c === osmocom-bb === * nothing found calypsotest/main.c === nuttx-bb === * Copyright Stefan Richter * BSD License * apps/examples/calypsotest/main.c

=== osmocom-bb === * Copyright Harald Welte and Steve Markgraf * GPL License * src/target/firmware/board/compal_e99/init.c

ostest/main.c === nuttx-bb === * Copyright Gregory Nutt * BSD License * apps/examples/ostest/main.c * Note: lights_on function used snipped code of OsmocomBB src/target/firmware/board/compal_e99/init.c === osmocom-bb === * nothing found init.c and calypso_heap.c === nuttx-bb === * Copyright Stefan Richter * BSD License * nuttx/arch/arm/src/calypso/calypso_heap.c {{{
void up_addregion(void) {
#ifdef CONFIG_ARCH_BOARD_COMPALE99
/* Disable watchdog in first non-common function /
wdog_enable(0);
#endif
// XXX: change to initialization of extern memory with save defaults
/
Configure memory interface */
calypso_mem_cfg(CALYPSO_nCS0, 3, CALYPSO_MEM_16bit, 1);
calypso_mem_cfg(CALYPSO_nCS1, 3, CALYPSO_MEM_16bit, 1);
calypso_mem_cfg(CALYPSO_nCS2, 5, CALYPSO_MEM_16bit, 1);
calypso_mem_cfg(CALYPSO_nCS3, 5, CALYPSO_MEM_16bit, 1);
calypso_mem_cfg(CALYPSO_CS4, 0, CALYPSO_MEM_8bit, 1);
calypso_mem_cfg(CALYPSO_nCS6, 0, CALYPSO_MEM_32bit, 1);
calypso_mem_cfg(CALYPSO_nCS7, 0, CALYPSO_MEM_32bit, 0); /* Set VTCXO_DIV2 = 1, configure PLL for 104 MHz and give ARM half of that */
calypso_clock_set(2, CALYPSO_PLL13_104_MHZ, ARM_MCLK_DIV_2); /* Configure the RHEA bridge with some sane default values */
calypso_rhea_cfg(0, 0, 0xff, 0, 1, 0, 0);
}

}}} === Osmocom-bb === * GPL * Copyright Harald Welte and Steve Markgraf * src/target/firmware/board/compal_e99/init.c {{{
void board_init(void) {
/* Disable watchdog (compal loader leaves it enabled) */
wdog_enable(0);

/* Configure memory interface */
calypso_mem_cfg(CALYPSO_nCS0, 3, CALYPSO_MEM_16bit, 1);
calypso_mem_cfg(CALYPSO_nCS1, 3, CALYPSO_MEM_16bit, 1);
calypso_mem_cfg(CALYPSO_nCS2, 5, CALYPSO_MEM_16bit, 1);
calypso_mem_cfg(CALYPSO_nCS3, 5, CALYPSO_MEM_16bit, 1);
calypso_mem_cfg(CALYPSO_CS4, 0, CALYPSO_MEM_8bit, 1);
calypso_mem_cfg(CALYPSO_nCS6, 0, CALYPSO_MEM_32bit, 1);
calypso_mem_cfg(CALYPSO_nCS7, 0, CALYPSO_MEM_32bit, 0);
/* Set VTCXO_DIV2 = 1, configure PLL for 104 MHz and give ARM half of that */
calypso_clock_set(2, CALYPSO_PLL13_104_MHZ, ARM_MCLK_DIV_2);
/* Configure the RHEA bridge with some sane default values */
calypso_rhea_cfg(0, 0, 0xff, 0, 1, 0, 0);

}}}

Files (0)

Updated by about 8 years ago · 35 revisions

Add picture from clipboard (Maximum size: 48.8 MB)