Project

General

Profile

Bug #2403

Updated by msuraev 9 months ago

See TS 44.018 Chapter Chaptere 5.4.1:

* PAGING-PS: The network may initiate paging of an MS in READY mobility management state at an indication of a lower layer failure (see 3GPP TS 24.008 sub-clause 4.7.9.1). In this case, the BVCI=PTP may be used.
* PAGING-CS: If the network initiates circuit-switched paging of a MS in READY mobility management state (e.g. a MS in class A or B mode of operation and in packet transfer mode), then the BVCI=PTP. If the MS is in STANDBY state, then the BVCI=SIGNALLING.

However, OsmoPCU currently expects PAGING to occur only on the SIGNALING BVCI=0.

Back

Add picture from clipboard (Maximum size: 48.8 MB)