Project

General

Profile

Issues

Filters

Apply Clear

# Project Tracker Status Priority Subject Assignee Updated Related issues
1428 SIMtrace Feature Closed Normal increase default trace width in simtrace pcb tsaitgaist 02/20/2016 06:44 PM
1429 SIMtrace Feature Closed Normal usb jack type is really hard to manually solder tsaitgaist 02/20/2016 06:44 PM
1430 SIMtrace Feature Closed Normal clearly indicate location of 'pin 1' of components and connectors tsaitgaist 02/20/2016 06:44 PM
1431 SIMtrace Bug Closed High use PA16 for UDP_PUP as required by SAM-BA tsaitgaist 02/20/2016 06:44 PM
1432 SIMtrace Bug Closed Normal simtrace: bootloader switch without function tsaitgaist 02/20/2016 06:44 PM
1433 SIMtrace Feature Closed Normal use 90 degree angled jumpers for ERASE and TEST tsaitgaist 02/20/2016 06:44 PM
1434 SIMtrace Bug Closed High socket for FPC SIM adapter is mechanically incompatible with rebelsim fpc tsaitgaist 02/20/2016 06:43 PM
1435 SIMtrace Bug Closed Normal sim card detect does not work (SW_SIM) tsaitgaist 02/20/2016 06:43 PM
1436 SIMtrace Feature Closed Normal add VCC_PHONE to an unused GPIO tsaitgaist 02/20/2016 06:42 PM
1437 SIMtrace Bug Closed Immediate on resistance of bus switch not acceptable, at least not for Vcc tsaitgaist 02/20/2016 06:42 PM
1439 SIMtrace Feature Closed Low move ERASE and TEST jumper a tint bit, so a 1x4pin header works tsaitgaist 02/20/2016 06:42 PM
1440 SIMtrace Feature Closed High Use through-hole mini-USB-B socket tsaitgaist 02/20/2016 06:42 PM
1441 SIMtrace Feature Closed High Use through-hole 2.5mm jack tsaitgaist 02/20/2016 06:42 PM
1442 SIMtrace Feature Closed High Make LED footprints 0805 instead of 0603 tsaitgaist 02/20/2016 06:42 PM
1443 SIMtrace Feature Closed High Adapt to different SPI flash (foot print) tsaitgaist 02/20/2016 06:42 PM
1444 SIMtrace Feature Closed High Adapt to different shottky diode footprint tsaitgaist 02/20/2016 06:41 PM
1445 SIMtrace Feature Closed Low Some component labels (resistors/capacitors) are not readable tsaitgaist 02/20/2016 06:41 PM
1446 SIMtrace Bug Closed High test ticket to check notification tsaitgaist 02/20/2016 06:41 PM
1447 SIMtrace Bug Closed High C14 is too far from LDO, causes oscillation tsaitgaist 02/20/2016 06:41 PM
1448 SIMtrace Bug Closed High silk screen print on top of soldering pads tsaitgaist 02/20/2016 06:41 PM
1449 SIMtrace Bug Closed High no solder mask between the pads of the AT91SAM7 tsaitgaist 02/20/2016 06:41 PM
1452 SIMtrace Bug Closed High move C14 directly to pad 4 of IC2 tsaitgaist 02/20/2016 06:40 PM
1453 SIMtrace Feature Closed High Move C21 closer to VCC_SIM pad tsaitgaist 02/20/2016 06:39 PM
1454 SIMtrace Feature Closed High add "sysmocom" text into the copper layer tsaitgaist 02/20/2016 06:39 PM
1455 SIMtrace Feature Closed High try to improve trace width / blocking caps tsaitgaist 02/20/2016 06:39 PM
(51-75/1102) Per page: 25, 50, 100, 250, 500

Also available in: Atom CSV PDF

Add picture from clipboard (Maximum size: 48.8 MB)