Bug #2458
closedofono: status=registered signal sent to ofono users before being attached
0%
Description
ofono signals to its users that a modem is attached before receiving first "Location Update Accept", that is before being really attached. This is a source of problems for our tests as we need to know reliably whether the modem is attached or not. We should try to fix this as soon as possible because it's making us lose a lot of time with errors in tests and preventing us to add new tests to the default suite.
Issues detected so far:
- If a test tries to send a USSD code immediately after receiving the "registered" signal, it will fail because modem is still not really attached.
- If a test tries to validate that with auth/encryption in the network and with a bad KI it will be rejected, we still see the status="registered" signal sometimes until it is finally rejected.
Related issues
Updated by pespin over 6 years ago
- Blocks Bug #2239: ofono: USSD is not implemented for any modem added
Updated by pespin over 6 years ago
- Blocks Feature #2457: osmo-gsm-tester: add test case: validate "encryption" & "authentication" vty parameter added
Updated by pespin over 6 years ago
- Blocks deleted (Feature #2457: osmo-gsm-tester: add test case: validate "encryption" & "authentication" vty parameter )
Updated by pespin over 6 years ago
- Related to Bug #2511: ofono: check all services for simple use before register race condition added
Updated by pespin over 6 years ago
- Status changed from New to Stalled
Blocked until we have journalctl automativcally logged in artifacts + change the LAC.
Updated by pespin over 6 years ago
- Blocked by Bug #2576: include journal log `journalctl -o short-precise` to the test output added
Updated by pespin about 6 years ago
- Status changed from Stalled to Resolved
Situation seems good after we moved to using a different LAC for each test.