Actions
Feature #1439
closedmove ERASE and TEST jumper a tint bit, so a 1x4pin header works
Start date:
Due date:
% Done:
0%
Spec Reference:
Description
both jumper footprints look like a 4-pin could almost fit, but there's a fraction of a millimeter too much space resulting two 2pin to be soldered.
Updated by tsaitgaist over 12 years ago
- Status changed from New to Closed
- Resolution set to fixed
done in v1.0_production and v1.1
Updated by laforge about 8 years ago
- Project changed from OsmocomBB to SIMtrace
- Category changed from 244 to SIMtrace hardware
Actions