Actions
Bug #1435
closedsim card detect does not work (SW_SIM)
Start date:
Due date:
% Done:
0%
Spec Reference:
Description
The SAM7 has (software-controlled) internal pull-up resistors, but no pull-down resistors.
Thus, we cannot simply attach the sim card detect contact between 3V3 and the GPIO. We either add a pull-down (bad, as it adds a component and power consumption), or we connect the SW2 pin of the SIM card socket to GND instead of 3V3
Updated by laforge about 8 years ago
- Project changed from OsmocomBB to SIMtrace
- Category changed from 244 to SIMtrace hardware
Actions