Actions
Feature #1433
closeduse 90 degree angled jumpers for ERASE and TEST
Start date:
Due date:
% Done:
0%
Spec Reference:
Description
if we move the bootloader switch and JTAG further to the left of the PCB, as well as P2 further right, we create some empty space above the ERASE and TEST jumpers (JP1, JP2).
This means we can use angled (90degree) jumpers that lie flat on the PCB, reducing the overall heighth of the board.
As JTAG (P1) and P2 are normally not populated, the overall height of the board is only defined by the crystal.
Updated by laforge about 8 years ago
- Project changed from OsmocomBB to SIMtrace
- Category changed from 244 to SIMtrace hardware
Actions
