! osmo-bsc default configuration ! (assumes STP to run on 127.0.0.1 and uses default point codes) ! log stderr logging filter all 1 logging color 1 logging print category 1 logging print extended-timestamp 1 logging level all debug e1_input e1_line 0 driver ipa network network country code 234 mobile network code 70 encryption a5 0 neci 0 paging any use tch 0 handover 0 handover window rxlev averaging 10 handover window rxqual averaging 1 handover window rxlev neighbor averaging 10 handover power budget interval 6 handover power budget hysteresis 3 handover maximum distance 9999 dyn_ts_allow_tch_f 0 periodic location update 30 bts 0 type nanobts band DCS1800 cell_identity 0 location_area_code 5 base_station_id_code 63 ms max power 15 cell reselection hysteresis 4 rxlev access min 0 radio-link-timeout 32 channel allocator ascending rach tx integer 9 rach max transmission 7 channel-descrption attach 1 channel-descrption bs-pa-mfrms 5 channel-descrption bs-ag-blks-res 1 early-classmark-sending allowed early-classmark-sending-3g forbidden ip.access unit_id 666 0 oml ip.access stream_id 255 line 0 neighbor-list mode manual-si5 neighbor-list add arfcn 100 neighbor-list add arfcn 200 si5 neighbor-list add arfcn 10 si5 neighbor-list add arfcn 20 codec-support fr !dtx downlink !dtx uplink force gprs mode none gprs routing area 0 gprs network-control-order nc1 gprs cell bvci 1800 gprs cell timer blocking-timer 3 gprs cell timer blocking-retries 3 gprs cell timer unblocking-retries 3 gprs cell timer reset-timer 3 gprs cell timer reset-retries 3 gprs cell timer suspend-timer 10 gprs cell timer suspend-retries 3 gprs cell timer resume-timer 10 gprs cell timer resume-retries 3 gprs cell timer capability-update-timer 10 gprs cell timer capability-update-retries 3 gprs nsei 1800 gprs ns timer tns-block 3 gprs ns timer tns-block-retries 3 gprs ns timer tns-reset 3 gprs ns timer tns-reset-retries 3 gprs ns timer tns-test 30 gprs ns timer tns-alive 3 gprs ns timer tns-alive-retries 10 gprs nsvc 0 nsvci 1800 gprs nsvc 0 local udp port 23020 gprs nsvc 0 remote udp port 23000 gprs nsvc 0 remote ip 192.168.30.1 no force-combined-si no force-combined-si trx 0 rf_locked 0 !arfcn 871 arfcn 512 nominal power 23 ! to use full TRX power, set max_power_red 0 max_power_red 0 rsl e1 tei 0 timeslot 0 phys_chan_config CCCH+SDCCH4 hopping enabled 0 timeslot 1 phys_chan_config SDCCH8 hopping enabled 0 timeslot 2 phys_chan_config TCH/F hopping enabled 0 timeslot 3 phys_chan_config TCH/F hopping enabled 0 timeslot 4 phys_chan_config TCH/F hopping enabled 0 timeslot 5 phys_chan_config TCH/F hopping enabled 0 timeslot 6 phys_chan_config TCH/F hopping enabled 0 timeslot 7 phys_chan_config TCH/F hopping enabled 0 msc 0 ip.access rtp-base 25000 timeout-ping 20 timeout-pong 5 no timeout-ping advanced no bsc-welcome-text no bsc-msc-lost-text no bsc-grace-text type normal allow-emergency allow codec-list fr1 ! amr-config 12_2k forbidden ! amr-config 10_2k forbidden ! amr-config 7_95k forbidden ! amr-config 7_40k forbidden ! amr-config 6_70k forbidden ! amr-config 5_90k allowed ! amr-config 5_15k forbidden ! amr-config 4_75k forbidden mgw remote-ip 192.168.30.1 mgw remote-port 2428 mgw endpoint-range 1 31 bsc mid-call-timeout 0 no missing-msc-text